Hey thanks for checking out this post. Yeah it is HUGE and the pics will take forever to load. Once they have loaded, it may give you some insight on what you would like to do gauge wise! I have a lot of ideas to help if you are at a loss and a lot of things I would like to see happen that is unique that no one has done yet!
I have nothing but positive feedback from all my customers so rest assured you have no fear in having the led work performed!
- In case of any emergency, I STOCK gauge clusters and HVAC units, some for spare parts or testing, some just in case any issues ever were to happen.
- All of my work is 100% guaranteed. If you ever have an issue, I fix it period, no worries / no hassle.
- The bench is built to insure quality of the swap performed!
- All work performed with an ESD safe, temperature controlled soldering/desoldering station on an ESD mat.
- I have purchased plug in leads for the gauge cluster and HVAC units on the tC for bench testing before shipment.
- New digital variable regulated power supply for safe testing!
I have forked over large quantities of cash on very nice equipment to give you the quality you expect!
I make it easy...
- Red, White, Blue and Green LED's in STOCK to perform your swap!
- All the crazy mods such as two tone, reversed screens, color changing needles... NO PROBLEM!
- Return priority mail shipping INCLUDED IN THE PRICE OF THE WORK!
- All swaps with appointment are completed within 24 hours of receipt "usually within 12 hours of receipt!"
- Fast shipping, parts are shipped back to you right when they are finished or the next shipping day!
What is included in a standard swap for the tC
Gauge Cluster = $59.99 "return shipping included"
All gauge face LED's changed to desired colors or color combo's including...
- Odo lcd
- Blinkers
- Low fuel
- Cruise control
- All auto tranny leds
- Warning lights
HVAC = $69.99 "subtract $10.00 if you choose all RED led's"
All HVAC leds are changed to your desired color including...
- All HVAC buttons
- All sub "on/off" mini light on/off buttons
- Lcd screen is changed to your desired color
- Temperature knob is changed to your desired color "gradient recommended"
- Oem alarm & seatbelt leds changed to your desired colors
Steering Wheel Controls = $12.50 shipped back to you!
Door Locks = $15.00 shipped back to you!
OEM radio changed to your desired color $89.99 shipped back to you!
Wicked Effects!
Needle color change $30.00
2 tone effect on gauge faces $20.00 "translucent adhesive backed vinyl used, no markers that will fade or leave ugly streaks"
ODO inverted LCD screen $25.00
HVAC inverted LCD screen $30.00
Have something in mind? Something different? Hit me up and I will see what I can do!
Scion xA and xB swaps $44.99 shipped back to you! All leds changed to your desired colors.
DIY Parts! Available
Pre orders welcome!
Bulk dealership work, no problem!
Garage1217
06-06-2007, 02:47 AM
Effect of polarized film!
This photo is of a stock odo
http://www.garage1217.com/GAUGECLUSTERS/POLARIZED/stockodo.JPG
This photo is with the new filter installed.
http://www.garage1217.com/GAUGECLUSTERS/POLARIZED/oppositepolarityodo.JPG
This is a video of the effect of polarized film on an LCD screen. Vid is 18mb so download can take awhile...
Here are some random pics of needles I have done.. All my needle work is done with the best neon paints that show the best under LED light. All needles are 100% taken apart and cleaned so there is NO orange left period or any goofy two color look to the needles when they are done. I can do any color you wish and mix colors for any custom look you want!
Red needles
http://www.garage1217.com/GAUGECLUSTERS/7-17-06/red1.jpg
Sky blue needles
http://www.garage1217.com/GAUGECLUSTERS/CHECKSUMS/check1.jpg
Test cluster for different colors...
http://www.garage1217.com/GAUGECLUSTERS/NEWCOLORS/GA1.jpg
Here are some new pics of a reverse ODO with white leds behind it. Also are some pics of a gauge cluster I just did for myself that is one of my toy units that I tear apart often. It has sky blue needles, blue two tone and reverse ODO. First pic is in DAYLIGHT so you can see what the reverse ODO looks like!
Yes I know the font is big, the photos huge and the post takes forever to load, noted before you even post *LOL* All good :)
turbodreams
06-06-2007, 03:06 AM
Hey i love what you can do with the colors! please PM me a price to switch everything to blue, and also how hard is it to install. Where are you located, if close id rather just have you install it. Thanks again, and they all look great!
Garage1217
06-06-2007, 03:08 AM
I am located in Coolidge Arizona. I can sell you the raw parts which are located on my website or I can perform the work for you. Let me know what you would like to have done :)
aalbertson3
06-06-2007, 06:52 PM
Got anymore xB pictures yet? :pray:
Garage1217
06-06-2007, 09:32 PM
Man I sure do not, A local is talking about an all yellow setup so weill see about that. Strange but not many xb customers. I love to do them and xa"s!
Garage1217
06-10-2007, 02:59 AM
Evening BUMP!
06B0X
06-10-2007, 09:07 PM
PM sent with some specific questions..
Garage1217
06-11-2007, 01:49 AM
Replied thanks!
Garage1217
06-13-2007, 01:58 AM
Evening BUMP!
aalbertson3
06-13-2007, 04:40 PM
Maybe I should get all mine done in red so you have some xB pictures...... lol
Garage1217
06-13-2007, 06:50 PM
Sounds like a plan :)
Garage1217
06-18-2007, 12:27 AM
Evening bump!
Garage1217
06-19-2007, 07:35 PM
Wow a lot of pics bump!
Daskid
06-19-2007, 08:30 PM
Question, are you gonna run this sale for the next couple of months? I don't have time to do this myself and I find your work very clean and creative. :D
CSOCSO
06-19-2007, 08:56 PM
if i want color changing needle then the needle is gonna be what color??
like.. below 3.5k rpm the needle is blue.. and above 3.5k rpm the needle turns red.
Garage1217
06-19-2007, 10:10 PM
Those are my standard prices, you may have the work done anytime!
CSOCSO
06-20-2007, 06:18 PM
answer for my question?
Garage1217
06-20-2007, 06:25 PM
With the color changing needles, the base color of the needle is white, and then it turns to a color. I have meant to try a two color version but have not had time yet. Also sorry, did not see your post :)
Garage1217
06-24-2007, 02:18 PM
Bump!
Garage1217
06-26-2007, 07:24 PM
Bump!
aalbertson3
06-27-2007, 04:07 PM
Bump! Can't wait to get mine done......... :D
Garage1217
06-27-2007, 06:05 PM
Cannot wait to do it!
tC4italy
06-27-2007, 06:15 PM
wow....very nice job!
aalbertson3
06-28-2007, 03:44 PM
Free Bump!
aalbertson3
06-29-2007, 05:37 PM
TTT
battlebox
07-02-2007, 09:18 PM
Garage 1217 rocks. I talked to jeremy on AIM to plan out exactly what I wanted, mailed him the gauge, and he phoned me when it was all done!! I call that customer service! well worth the price!
aalbertson3
07-03-2007, 05:13 PM
We want pictures! :D
Garage1217
07-05-2007, 07:46 PM
Happy 4th of july bump! And Happy "I got married this week" bump *LOL*!
Here are some more pics for you all of work done this week :)
So what would I be looking at in $ for this one:
http://www.garage1217.com/GAUGECLUSTERS/2-10-07/jcluster.jpg
Basically the blue/white 2tone is hawt with the red needles and I'd like the warning lights to stay normal.
You think I'd have any issues driving for a week or whatever the turnaround is without a cluster? Aside from speed, I guess fuel would be the biggest concern. Is that what most of your customers have done? Just drive without it for a while? I wouldn't be able to consider it for a couple of weeks, but trying to think of planning something...
Garage1217
07-05-2007, 08:25 PM
Pm sent :)
aalbertson3
07-09-2007, 03:56 PM
Another Free Bump!
JINeration
07-10-2007, 05:47 AM
this might be off topic but on my hvac unit my clock is dimmed is there newayz of gettin this fixed?
Garage1217
07-10-2007, 06:04 AM
yeah you have to install a resistor / power ic kit that engifineer designed. I sell them on my website.
rolloutrs1
07-10-2007, 07:05 AM
do you have a DIY on how to remove the part that needs to be shipped? planning to get some work done. thanks!
Garage1217
07-10-2007, 04:33 PM
I do not off hand, but it is cake. I am happy to walk ya through it. Just send me a pm. Takes about 5-8 minutes to remove everything the first time.
Garage1217
07-11-2007, 04:33 PM
Bump!
aalbertson3
07-12-2007, 04:51 PM
TTT
ack154
07-16-2007, 03:19 PM
I'm hoping I'll be able to do this next week when I get paid... timing for being without my cluster might be OK too. Will be in touch. :)
Garage1217
07-16-2007, 07:26 PM
Right on man ! Keep me posted!
aalbertson3
07-17-2007, 05:18 PM
Bump for some great swaps! :)
Garage1217
07-19-2007, 02:32 AM
Thanks man :)
rhino74s
07-20-2007, 01:23 PM
Yet another bump for Jeremy!
Just got my hvac back to match the speedo work he did for me. Blue & white two tone, ftw!
aalbertson3
07-20-2007, 04:59 PM
Sounds Cool! Mind posting some pictures for the rest of us?
dagarhart
07-20-2007, 05:27 PM
Bump for awesome guy and great seller. I have seen his work first hand and would recommend him to anyone.
Keep up the great work.
aalbertson3
07-24-2007, 04:02 PM
Bump so everyone can see it! :)
Garage1217
07-25-2007, 11:28 PM
Thanks guys! Bump!
Garage1217
07-28-2007, 05:46 PM
Morning bump!
jallamas
07-28-2007, 05:49 PM
Nice website! I will be talking to you soon about a swap.
John
ajb787
08-01-2007, 12:14 AM
Awesome....looking forward to getting this done ASAP
06SuperWhite_SoCal_tC
08-01-2007, 08:59 AM
The Red, White, and Blue set-up looks amazing. Whats the turn around time on this... from removal to return of finished product?
Garage1217
08-02-2007, 11:11 PM
Turn around from the day you ship "if you use priority mail" is approx 6-7 days. No blunders or 2 week waits with me :) I value your business, all of you!
aalbertson3
08-08-2007, 05:37 PM
Bump! :bow:
aalbertson3
08-10-2007, 04:58 PM
Any more swap pictures for us?
Garage1217
08-10-2007, 05:10 PM
Yes more to come, been swamped :)
aalbertson3
08-13-2007, 05:09 PM
Another Free Bump!
Garage1217
08-13-2007, 05:11 PM
Thanks man, very appriciated!
aalbertson3
08-13-2007, 07:23 PM
Did you get my message? I called you Friday to ask a few questions......
Garage1217
08-13-2007, 07:32 PM
Notta, shoot me another call, nothing in my voicemail?
Garage1217
08-14-2007, 06:14 PM
Bump!
ajb787
08-19-2007, 02:08 AM
This guy is THE MAN....definitely recommend doing LED mods with him, great service, great work.
aalbertson3
08-22-2007, 04:08 PM
Bump!
Garage1217
08-22-2007, 04:56 PM
Bump!
aalbertson3
08-27-2007, 05:05 PM
Bump! Can't wait to send my stuff out for a swap. Just a few more shows and they are all yours. :bow:
Garage1217
08-27-2007, 06:05 PM
Right on man!
aalbertson3
08-31-2007, 04:49 PM
Pre-Holiday Weekend BUMP!
Garage1217
09-06-2007, 08:27 PM
Bump!
aalbertson3
09-12-2007, 04:40 PM
TTT
Garage1217
09-14-2007, 04:04 PM
FRIDAY BUMP!
Garage1217
09-21-2007, 05:08 AM
Almost Friday bump!
Garage1217
09-24-2007, 07:19 PM
Monday BUMP!
aalbertson3
09-26-2007, 04:32 PM
Bump for awesome swaps! :bow:
carbon_ninja
09-27-2007, 03:57 PM
what up bro i wanna get some work done before xmas
blue guages trd background with the colorchanging needles and a blue hvac
bascially blue all the way maybe some white here and there
aalbertson3
09-27-2007, 04:26 PM
what up bro i wanna get some work done before xmas
blue guages trd background with the colorchanging needles and a blue hvac
bascially blue all the way maybe some white here and there
Make sure you send him a PM. You can check out his website for some more pictures: www.garage1217.com
Also make sure you check out his current sale thread: http://www.scionlife.com/forums/viewtopic.php?t=193944
Garage1217
09-27-2007, 04:43 PM
what up bro i wanna get some work done before xmas
blue guages trd background with the colorchanging needles and a blue hvac
bascially blue all the way maybe some white here and there
Happy to do it for ya, but I do not sell the gauge faces. Led mods does for somthing like $150-$190??? for the faces..? I am in the process of designing my own but a lot of r&d is going into them to make them very affordable yet last as long as your car.
Garage1217
10-01-2007, 09:35 PM
Monday BUMP!
straightsilver21
10-02-2007, 01:29 AM
possibly looking to get some work done, sent you a PM.
stilsick
10-02-2007, 06:39 AM
very nice pics.. bump
aalbertson3
10-03-2007, 04:03 PM
Bump for the best swaps!
aalbertson3
10-08-2007, 04:27 PM
Bump! Sending all my stuff out after the wedding/honeymoon. Will give you another call in a couple weeks.
Garage1217
10-09-2007, 06:30 PM
Bump! Sweet man, keep me posted and congrats!
Garage1217
10-14-2007, 08:23 PM
Sunday BUMP!
Garage1217
10-26-2007, 11:11 PM
Back in the us / back home BUMP!
FLEA
10-27-2007, 06:46 AM
Do you send out speedometers and HVACs while you are working on customers?
Garage1217
10-27-2007, 08:32 AM
No sorry I do not.
FLEA
10-27-2007, 10:29 AM
Still want you to do mine? Are you willing to redo all of Paul aka whiteblazer's work? I tried being patient with him but I need someone who doesn't treat others like $h!t to work on my stuff.
Garage1217
10-27-2007, 10:40 AM
Yeah I can set ya up no prob. Long as components are not damaged then I can clean it all up for ya. If there is heavy clean up involved, would be a small fee but should not be to bad.
aalbertson3
10-29-2007, 06:49 PM
Bump!
aalbertson3
11-02-2007, 06:22 PM
TTT :bow:
aalbertson3
11-13-2007, 03:59 PM
Bump! :bow:
tcday
11-14-2007, 07:53 PM
question so i'm intersted in buying this but who does installation ourself or you or sumone near u i live in nj. please pm me i would like to order
aalbertson3
11-27-2007, 04:33 PM
Bump for holiday swaps! :bow:
Garage1217
11-27-2007, 08:57 PM
Thanks, and yes! BUMP for holiday swaps!
tcday
11-27-2007, 08:58 PM
i still haven't got any info i'm still waitin i wanna know if dere is any place in nj or ny or where are you guys located at cuz i want to do a swap and change colors
Garage1217
11-27-2007, 09:00 PM
I am located in Az, I send a pm long ago to you. I can only offer mail order and I do not know of any current swappers in NY.
tcday
11-27-2007, 09:02 PM
how bout nj
Garage1217
11-27-2007, 09:17 PM
No longer know anyone in that area either. Cannot remember were Dave is located but I do not think it is NJ.
I will post pictures of my swap from Jeremy next week. Awesome work and super fast turn around time. :bow:
SePaTc
02-08-2008, 05:06 PM
OOOOoooOOOOhhhhh!! purty colors!
Garage1217
02-12-2008, 10:18 PM
Week is going SLOW bump!
Garage1217
03-02-2008, 09:22 PM
Bump from overseas! Sitting in Zurich Switzerland right now out on business. I will be back on or after March 12th. All orders as of Feb 29th shipped on time. My wife will be taking care of shipping for me before I arrive home so no delays! Thanks guys!
HyPn0TiC
03-02-2008, 11:17 PM
Hey man, I have a question. I did the swap on my gauge cluster myself but wanted to know if you would be interested in doing the factory radio and HVAC. Also I didnt do my needles because I was a bit worried about screwing them up or breaking them. What type of paint do you use for those and what did you use to get the yellow off?
Garage1217
03-03-2008, 01:09 AM
PM sent.
Elijahtc
03-03-2008, 06:13 PM
how long does the process take from the time i send it to u to the time i get it back? can i just buy a setup from u without sending mine in?
Garage1217
03-03-2008, 10:49 PM
Hello, The process is very fast. For example, If I receive the gauges on a Monday, they ship out Tuesday via priority mail "return priority mail shipping is included in the swap price" so you will get them back Thursday or Friday. You can also pay extra to have them shipped express mail and they will get back to you in 1-2 days.
As for purchasing a setup, your gauge cluster holds your actual vehicles milage. So you have to have your original cluster modified. Thanks!
fakawot
03-07-2008, 06:01 PM
Sweet... hows the down time for 96701. u only need 1 day but it takes close to a week due to shipping right?
Garage1217
03-08-2008, 09:10 AM
Depends on how you ship, if you ship overnight to me and pay for overnight back it drops the down time to about 4 days total.
Garage1217
04-02-2008, 08:31 PM
My 1st baby girl due the end of this month BUMP! Very excited!
yellowxhoodie
04-02-2008, 08:49 PM
ill be contacting you soon to have this done.
If i were to send them out on a fri, for sat delivery when would you have them back to me?
Garage1217
04-02-2008, 08:58 PM
they would arrive back Wednesday under our included priority mail shipping. Let me know! Happy to knock them out for ya!
yellowxhoodie
04-02-2008, 09:08 PM
well idc about the radio or hvac or steering controls but i knida need my speedo cluster to drive.
lol
Garage1217
04-02-2008, 09:12 PM
understood :)
Garage1217
04-18-2008, 03:43 AM
Evening BUMP!
Parfnut
05-04-2008, 01:49 AM
Hello, I was looking at ordering raw LED's and parts from your web site . My question is what LED's (0803?) are you using for auto/cruise displays for the tC. Thanks John
Garage1217
05-04-2008, 02:47 AM
You can use 100% plcc leds on the tC. Do not buy the smaller units for the tC.
Parfnut
05-04-2008, 03:18 PM
According to the diagram it looks like there are two smaller LEDs per for auto trans lights. Are you replacing them with two plcc LEDs or just one. The plccs appear to be twice the size as stock LEDs.
Thanks,
John
Garage1217
05-04-2008, 07:03 PM
Not sure were you are looking?? On the tC cluster, there are no other size leds other than plcc-2
If you are talking about the silver spots on the diagram, those are the contact pads, the photo is of a manual tranny cluster so no leds soldered in the auto section...
Yeah you are correct. Now I see. I thought the ones to the right of the cruise control had two small LEDs. It is just the pads. Thanks I'll be ordering shortly. Have you done vinyl on the back side of buttons on the HVAC to try and keep the color the same as the cluster(I'm planning on going with two tone dash white/blue)? Sorry for all the questions I just want to make sure I get everything I need to complete the swap.
Thanks again,
John
Garage1217
05-05-2008, 03:21 AM
The blue vinyl I have matches pretty much flawless, took me a long time to find vinyl this close to the blue led color!
Parfnut
05-10-2008, 10:50 PM
Thanks! Just got my parts the on Friday. Can't wait to tackle this project! One last question. When I remove old polorized film what are you using to remove adhesive off the screen. I normally use WD40 for all adhesive removal, would that work or would you recommed something else?
Thanks! All your LED work looks great!
John
MuNkY
05-11-2008, 08:19 AM
done any xb2's yet? how much would it be for the gauge cluster in all green?
deathbyc4
05-12-2008, 10:36 PM
How much for all green, but white numbers, green needles, and still have red for warning area on the dials (7000 rpm + area and high temp and red fuel light and warning lights). Not worried about center console yet, but will be interested.
Garage1217
05-14-2008, 07:50 PM
Bump!
yellowxhoodie
05-14-2008, 08:12 PM
youve got a PM.
Garage1217
05-14-2008, 08:24 PM
Replied :)
yellowxhoodie
05-14-2008, 08:59 PM
just ordered all my LED's!
thanks for the fast responses and all your help!
awesome experience already! great guy to work with!
MuNkY
05-15-2008, 12:56 AM
What about my question?
deathbyc4
05-15-2008, 05:05 AM
mine too.....
Garage1217
05-22-2008, 03:34 AM
done any xb2's yet? how much would it be for the gauge cluster in all green?
XB2's require new gauge faces and I currently do not have a source for them as the only person that does made the maker of the faces "black cat customs" sign some sort of a deal were they cannot sell to any other swappers even though that said swapper has copied almost all of our work *LOL* Nice.
So in short if you get a gauge face, I can swap it no prob. And I have done xb2's locally. Runs $59.99 shipped back for the gauge cluster for a basic color change.
Garage1217
05-22-2008, 03:35 AM
How much for all green, but white numbers, green needles, and still have red for warning area on the dials (7000 rpm + area and high temp and red fuel light and warning lights). Not worried about center console yet, but will be interested.
Two tone with needles for the GC only runs 109.99 shipped back express mail!
SharpCyrcle
05-26-2008, 06:42 AM
great conversions very interested.
Parfnut
05-29-2008, 02:08 AM
Hey Garage1217,
I was just starting my LED swap and was going with two tone cluster. Do you what the reasoning behind the white screen printing over some of the numbers and dashes are/ is this common on all faces? Is it because that is where the LED's are located and they wanted to diffuse the light around that area or in this just a flaw in the face.
Also thanks for the fast shipping on my parts order!!
Garage1217
05-29-2008, 02:16 AM
The white backing is only to help reflect light under the gauge face / the same reason the plastic is white and the circuit board has white paint. Helps make it brighter and also makes a more even light.
Also good photo of how you apply the translucent viny!
Now be carefull, if you even scratch the paint were the MPH numbers are actually at, you can see through the gauge face!!!! If the white is scratched in any other gauge face location, it is no big deal.
How much for this as well as the steering wheel controls and the window and door lock controls in blue.
Garage1217
05-29-2008, 06:04 PM
Hey man, did you take the needle back off :) It is dead on in one pic and way off in the other..? If so I can help you align it. It is cake :)
Garage1217
06-02-2008, 08:29 PM
Sl is back up and running bump!
Garage1217
06-11-2008, 05:30 AM
Bump!
Garage1217
06-24-2008, 03:51 PM
Bump!
TheCCBox
06-24-2008, 05:09 PM
I want the green one for my XB
Garage1217
07-08-2008, 05:39 AM
Updated the website tonight & started up the new online store! Makes it SUPER easy to shop without hassle. I have a ton of new products on the way that you guys are going to dig big time!!!
:rolling: :rolling: :rolling: :rolling: :rolling: :rolling: :rolling: :rolling: :rolling:
New store is located at:
http://store.garage1217.com/
Of course the old website is still up in a fashion... Will use it for text & other documentation.
As always myself and my family really appriciate your business!
www.garage1217.com
Garage1217
07-09-2008, 04:10 AM
Working my tail off on the new webstore, new items being added daily! Added quite a few this evening!
I really appriciate the scionlife community support! You have no idea how much the garage1217 family appriciates you keeping your business with us.
http://store.garage1217.com/
jallamas
07-09-2008, 07:53 AM
Do you do anything for the First Gen XB?
Thx
John
Garage1217
07-09-2008, 07:54 AM
Yeah I do, just do not have many pics of them. Pm me if you would like to have some work done.
Garage1217
07-12-2008, 06:29 PM
Saturday BUMP! Have a great weekend guys!
Garage1217
07-17-2008, 06:49 PM
Almost FRIDAY bump!!
Garage1217
07-27-2008, 07:02 PM
NEW WICKEDNESS COMING SOON :) ANYONE UP FOR REMOTE CONTROL COLOR CHANGING GAUGE FACES? HEHEHE.
Have two swaps to do before I can rock the color changing project, then I will be on it like white on rice! Controllers and all are here woot!
Garage1217
08-06-2008, 05:00 AM
Evening bump! Be sure to check out the wicked LED 194/168 dome light bulbs on the webstore! The light dispersion & brightness is wicked & they are RELIABLE!
Garage1217
08-09-2008, 05:02 AM
Performed a new kind of pink sexy swap for the ladies. Pics do not show how good the pink turned out or how good the reverse screens turned out, looks stellar!
pic of what yellow would look like? on a tc?
On his site, he has a pic of neon yellow here: http://www.garage1217.com/album1_005.htm
Also, attached is the pic. Man he does great work. I am going to have him do my '09 tC soon.
http://www.garage1217.com/album1005008.jpg
Garage1217
10-07-2008, 05:03 AM
I have only done 2 yellow setups, and both look 10x better in person. That pic above was with orange needles, the one I did with both yellow needles and yellow faces for the now famous Corona tC looked super sweet.
Garage1217
10-15-2008, 02:30 AM
Bump!
Garage1217
10-28-2008, 12:03 AM
Monday BUMP!
B-2-THE-WHITE-XB
10-28-2008, 12:31 AM
i would like to get some work done by you on my 09 xb i would to do purple guages
Garage1217
10-28-2008, 03:59 AM
No prob, You will need to buy gauge faces for the xb as the stock ones are tinted reddish orange. Also the needles would have to be red as they are tinted reddish orange as well. Feel free to PM me with any questions!
Garage1217
11-10-2008, 03:23 PM
Back up and running! All order shipped out over the weekend since I was closed last week because of travel. Appreciate all the support fellow scion owners!
Garage1217
11-19-2008, 10:24 PM
Almost turkey week BUMP!
tCvera
11-23-2008, 05:44 AM
did u ever get the remote control color changing gauge face?
BUMP
Garage1217
11-23-2008, 03:58 PM
I have the remote control color change strips I have been playing with, but have not had a chance to implement them into a gauge cluster. They work great :)
rudyrivera1189
11-24-2008, 01:06 AM
Hey Jeremy here are the pics of the gauges and hvac I did with your leds !
The pics are blurry and on some pics the color looks like a light blue but it's from my flash. I need a better camera.
Happy Holidays from garage1217!! Get your orders in by tomorrow for a possible before Christmas delivery or just after!
Garage1217
12-26-2008, 06:26 AM
Merry Christmas everyone! Hope it rocked for all of you!
Garage1217
01-06-2009, 07:19 AM
New year bump!
Garage1217
01-14-2009, 01:39 AM
Tuesdays gone with the wind BUMP!
Garage1217
01-20-2009, 03:38 AM
Weekly bump!
Garage1217
01-25-2009, 06:08 PM
Weekends almost gone :( BUMP!
Garage1217
02-06-2009, 11:00 PM
Weekend BUMP!
Garage1217
02-15-2009, 03:36 AM
Weekend BUMP!
Garage1217
02-22-2009, 04:29 PM
Sunday BUMP!
weeloTC
02-24-2009, 03:59 AM
i recently did my own led swap and wasn't aware of some sort of special resistor needed when using blue leds in you hvac, so currently my hvac is super dull, if i shipped you that out, what would it cost for parts, labor and return shipping to get it as bright as the speedo, also want to send out my streering wheel controls and have those done as well, just pm price, thanks
Garage1217
02-24-2009, 04:23 AM
PM sent.
Garage1217
02-27-2009, 04:34 PM
Friday BUMP!
Garage1217
03-12-2009, 09:09 PM
Almost the weekend BUMP!
Garage1217
03-25-2009, 08:18 PM
BUMP!
Garage1217
03-30-2009, 05:12 PM
Monday BUMP!
SCION10000000
03-31-2009, 04:10 PM
hey where are you located, cuz i want to see if i can have you do it for me
Garage1217
03-31-2009, 04:22 PM
Arizona
Garage1217
04-12-2009, 04:18 AM
Easter BUMP!
Garage1217
05-03-2009, 07:05 PM
Sunday BUMP!
rudyrivera1189
05-05-2009, 01:14 AM
Awesome guy, and great product BUMP!
Garage1217
05-15-2009, 02:34 AM
Almost FRIDAY bump!
Garage1217
06-01-2009, 11:26 PM
Monday BUMP!
nrgwar
06-01-2009, 11:31 PM
Bump for great picture topic
Garage1217
06-02-2009, 07:36 PM
Thanks!
Please note, we now stock 2005-2009 Scion tC HVAC units! You can buy just the hvac or the unit already modified!
I'm very interested in getting this done. I think what I like the most is the Blue and white two tone with white needles & reversed screen. I do want it varied a little though. Instead of all the indicators being red I'd rather have them blue. Shoot me a pm and let me know how much everything but the radio would be, and so we can talk about colors etc. Thanks.
Garage1217
06-02-2009, 09:40 PM
No problem, PM sent.
Iceman04503
06-02-2009, 09:52 PM
Can I buy the instruction and part off of you for the color changing needle? I would send you my gauges but my car is my daily driver so i need my gauges. I already did the LED swap. Its the white LEDs with the blue vinyl over the numbers. If you can help me out that would be great. If not then it's alright too.
Garage1217
06-02-2009, 09:53 PM
Pm Sent.
Garage1217
06-05-2009, 11:24 PM
FRIDAY BUMP! Thank goodness for the weekends!
Garage1217
06-13-2009, 05:48 PM
What a nice weekend BUMP!
Garage1217
06-21-2009, 10:26 PM
Right on! Another weekend come and gone BUMP!
Garage1217
06-28-2009, 03:42 AM
Weekend BUMP!
Garage1217
07-04-2009, 02:47 AM
Almost the 4th WOOHOO! I hope everyone has a SAFE & outstanding holiday weekend! And do not forget why we are celebrating it!
Garage1217
07-20-2009, 09:14 PM
Monday BLUES bump!
Garage1217
07-31-2009, 08:38 PM
TGIF BUMP!!! The new forum is running great!
Garage1217
08-09-2009, 05:51 PM
Weekend BUMP! Order parts today, they ship tomorrow "Monday"!!! Expected arrival would be Wednesday - Thursday!
Garage1217
08-18-2009, 09:58 PM
Tuesday blues BUMP!
Garage1217
09-01-2009, 04:16 PM
The highly desired aluminum ringed 194/168 bulbs will be back in stock any day now! Get yours before this next large shipment sells out again! Oh and BUMP haha :)
Garage1217
09-16-2009, 06:07 PM
Mid week BUMP!
Garage1217
09-24-2009, 08:22 PM
Thursday BUMP!
Garage1217
10-12-2009, 05:13 PM
Monday blues BUMP! Hope you all had a great weekend!
Garage1217
10-21-2009, 09:20 PM
Wednesday bump! Friday here we come!
Garage1217
11-02-2009, 04:13 AM
Holidays are coming BUMP! I would sure love to earn your business! Hit us up anytime via PM, Email, Aim or Yahoo! I have been around for years rocking the scion community & plan many more years of quality LED work & products!
Garage1217
11-18-2009, 02:42 AM
Tuesday night BUMP! Getting cold out, even here in Az!
Domo
11-19-2009, 06:53 AM
Im interested..well I live in Chicago so I don't know how you want to do this but yea, I am trying to mimic carbonX's led swap. I don't have a picture on hand but I remember his set up being red and white. PM me the details to make this work. Thanks
Garage1217
11-28-2009, 02:04 AM
Pm's sent a bit back, happy to help when you are ready!
Garage1217
12-06-2009, 09:43 PM
Christmas is coming BUMP! Cannot wait! get your orders in asap for a quick delivery!
STrujillo
12-23-2009, 03:48 AM
All your gauges look great. I installed after market gauges on my 2008 Tc and I need to find out what wire makes the gauges illuminate??? Please help. Pics would help out a lot. Thanks
Garage1217
12-23-2009, 04:21 AM
Hello, Sorry I perform the work on the leds themselves, I do not use layover gauges so never had to find an illumination wire off the cluster. I used to know were the old diagrams were on the old scionlife site, but I do not any longer.
STrujillo
12-23-2009, 04:34 AM
Darn is there any possible way to find it? Ive been looking all over the internet trying to find it but no luck. Ive been to the dealership and they are just dumb.
Garage1217
12-23-2009, 05:00 AM
I was able to find the old electrical schematics post, not sure the year of your tC. Go through these to locate the illumination wire by pinout. I would do it for you, but in the middle of family night / on my mobile. If you cannot find it, hit me up.
http://www.scionlife.com/forums/showthread.php?t=73323
STrujillo
12-23-2009, 05:21 AM
thanks what would it be under?
Garage1217
01-09-2010, 09:54 PM
Weekend bump! Wow 2010 already?
Garage1217
01-23-2010, 01:25 AM
Been a very busy few weeks with the new products on the website! Do not forgot to check out the new flagship LED dome lights! They are wicked!
http://store.garage1217.com/new-flagship-36-chip-dome-light-36led-output-wi3636.html
We also now stock a longer festoon for the xA as well!
http://store.garage1217.com/new-aluminum-3175-festoon-bulb-color-matches-the-194168317519416839.html
And for those that have older clusters with twist style bulbs, we have our custom built led replacements that cast a very even light! Mr2 guys are going nuts for them! I bet the Lexus guys will catch on quick as well!
http://store.garage1217.com/custom-twist-socket-aluminum-ringed-high-output-bulb.html
Garage1217
02-26-2010, 03:18 PM
Friday BUMP! This week has gone by way to slow!
Garage1217
03-11-2010, 05:25 PM
Almost Friday bump!
Garage1217
03-26-2010, 09:50 PM
TGIF BUMP!!!! Man this weekend could not come soon enough!
Garage1217
04-15-2010, 10:43 PM
Almost FRIDAY bump!
Garage1217
07-12-2010, 04:49 AM
Happy heatwave BUMP!
Garage1217
08-21-2010, 03:03 PM
Bump! PLCC-2 LEDS JUST 0.49 CENTS!!!
Garage1217
09-09-2010, 02:36 AM
Weekend coming up BUMP! Cannot wait!
Garage1217
10-05-2010, 05:50 PM
BuMp!
Garage1217
10-26-2010, 03:57 PM
Cooler weather is finally here BUMP!
tC4italy
11-24-2010, 04:46 AM
Thanks Jeremy for the brilliant work and kindness :icon_biggrin: