I got the oznium cathode kit, the 4 inch ones. Wired it in to my system that has two 12 inch cathodes and a led shifter bezel. My question is this, what is the best way to hang them/attach them under the seats. i am stimied, cause I dont want to rip up the under portion of the seat cover.

Ps I am talking about the driver and passanger seats on an xb.

Thanks!

 

zip tie

 

to what thought? thru the fabric?

 

There are two tiny little bars that come out at the back bottom of the seat, one on each side, that is just big enough to wrap a ziptie around to hang the cathodes. ( only works for the 12" ones, I think 4" ones will be too small to reach to each end of the seats.

 

^^ thanks, i am in houston galveston alot by the by

 

Always glad to help. I think a few of us H-town box owners are planning a get together here soon, I'll keep ya informed if ya wanna come out and show off the cathodes.

 

H-town box in the hizzy!
When you getting a box meet together?

BTW I used double sided tape for my cathodes under the seat. Get the good stuff, 3-M makes the best.
Make it stick to the square part of the cathode and you are set. I taped to the metal part under the seat.

 

Thanks Iron and D-man. I wil lhave to check you guys out next time in town. Only problem is I always fly down to texas. maybe I can take the brother-in-laws porsche out when I'm down....

 

DMAN, here ya go
http://www.clubxb.com/forums/f39/110...x-dinner-meet/

Oni, hell yeah take out the porsche when you fly back down.

 

look at the tech section - superjeer wrote an awesome how-to on installing those under the seats.