I'm looking to do a single stripe vinyl over my driver's side...
so naturally i have questions...
first,
where have people gone to? (online?, shops?)
second, how much have you spent?
was it pretty invloved to put the vinyl on? and what other costs are involved?
if I missed a post that talks about this stuff, point me to it, I missed it. (clearly)
:pray: hope some people know vinyl!

i HERD RANDODE can do it. www.Randode.com

I'm looking to do a single stripe vinyl over my driver's side...
so naturally i have questions...
first,
where have people gone to? (online?, shops?)
second, how much have you spent?
was it pretty invloved to put the vinyl on? and what other costs are involved?
if I missed a post that talks about this stuff, point me to it, I missed it. (clearly)
:pray: hope some people know vinyl!

I googled shops near me and called them all for quotes. A lot of people weren't very helpful or just plain apathetic about the work. The bigger companies really didn't care if I gave them business or not and were slow to email me back and answer questions.

Look for a small shop where they can really give you attention and a quick turnaround time. I found this place called www.LoudOcean.com and it's just this man and woman who have a small shop and they totally gave me price breaks and quick installation.

www.PoisonAppleShirts.com/scion.htm

Getting vinyl printed and installed are pretty basic things. Most printers have the same machines and cutters. Installation is just like putting on a sticker but it takes experience to mold them to curves and to make sure everything is even with no bubbles. Ask if they use sublimation printing, 3m or Avery vinyl, and if they're going to laminate it.

I ended up spending $1200 for my sides and back with install but yours will be much less expensive.

Good luck!

I am the Production Manager at a place called Image Monster located in Wilmington, NC. We do Vehical Graphics...hit me up for more info!...or send me some email at www.bobby@imagemonster.com and let me know what you're looking to do!!!...we ship out everywhere!!! everything is priced by square footage. We can do print/laminate/cut or just some cut vinyl.....

http://i6.photobucket.com/albums/y238/dadoo/newgraphics.jpg

here's my xB with some window graphics...it's layered red on top of white.

I use www.speedgraphics.net
out of Asheville NC
They do incredible work and use killer 3M controltac vinyl here are my 2 cars

http://i77.photobucket.com/albums/j42/jzeusrivera/scionpictures2006001.jpg
http://i77.photobucket.com/albums/j42/jzeusrivera/scionpictures2006007.jpg

man, im pretty sure you just showed me exactly what i needed... they have the stripe that i want... and hey do reflective vinyl!! ooohhh.... appreciate it and BTW you're crazy for having 2 RS3.0s...