View Full Version : Driver side window and doorlock switch panel question


oj411
12-27-2003, 07:34 AM
I just installed my speakers today but after I unscrewed the switch from the silver bezel on the driver side door and after I screwed all three screws back into the bezel and put the door panel back on I noticed when I was pulling on the window lever the entire bezel came up. I took a look at it it seems the back part has a part that sticks out and is placed between the outer and inner area of the panel like a wedge but the front of the bezel does not seem to have anything that holds it into the panel so evertime I pull up on the window switch the entire thing comes up I took a look at the inside of the door panel and it does not seem that I forgot to screw anything back in thats holds it in but I could be wrong. Any suggestions would be welcomed,
Thanks

Slopoke21m
12-27-2003, 05:51 PM
There is a small piece of spring steel that goes on that front screw. Make sure it is in correctly or not missing all together. Thats the only thing I could think of. See Ya, Louie 8)