I just purchased some nice wheels for the tC

They are 18 x 7.5 with a +48 offset.

I am needing to know what size of a spacer I am going to need to make these fit flush.

Will they fit flush as is?

I am very familiar with the xB set up just not the tC so thanks for any help!

 

prolly a 15 mm would work. a complete flush with a chance of rubbing is at 20 mm.

 

Front & Rear?

I don't want to rub the front when I crank the tires.

 

what springs are you on?

 

Stocks right now but considering H techs or TRD's

 

you should be able to get away with 10mm wheel spacers...

 

Perfect!

 

no such thing as a 10 mm spacer. or so i've seen

 

hmmmmmmmmmm

 

if there was 10 i would be on it!!! i know theres only 5,15,20mm

 

okay thanks for the info!

 

yeah i'd like to see a picture of 18x8 or 18x7.5 with +48 offset also.

 

I should have them in 1.5 weeks!

 

2 x 5mm = 10mm

 

Naw rather just have one or the other

 

yea, I would minimize objects between the hub and your wheel as much as possible..lol.

 

Thats not recommended and safe. If you look at my photoshoots my rims are 18x7.5 with 48 mm offset.

 

post them here!

 

Never mind got them!

 

yeah...i hear you on that...you can find 10mm spacers our there...just harder to find...

you should be fine with 15mm spacers...5mm isnt too big a difference...