I am surprised nobody offers these. I cannot for the life of me find any retailers of kick panels.


Am I missing someone or is it an item that nobody wants?

its an item that is such low demand that to make them would not be cost / time worthy for a company. they need to be custom made

i dont think ive seen kick panels for any car...you just have to DIY or have a show DIFU(do it for you)

I'm just surprised that not even anybody on here has been offering to do it.

There is every other thing made/sold between members here...just not the kick panels.

thats because typically when someone makes them they want to keep them

If I were to make some for 5 or 6 inch speakers would anybody be interested in purchasing them? Or what would you guys want on them? Lights? Speakers? Or just painted or something.

Basically what I want is similar to what Rocketgrl has....just a kick panel to hold 6.5's and tweeters to make the sound stage a little better.

..trying to find the thread..

Send me your kick panels, and I can fabricate 2 speakers in them for you. Painted and all.

how much you gunna do it for i think i would be interested.

It would be 40 - 50 dollars to customize one including gettin the rings made for the speaker and all the fiberglass and bondo work.

+25 for paint

OR

+20 for suede wrapped (very nice)

Total for both would be around $110 - $125. I say not bad.

I did a search to help you guys out on what hey kind of look like for the people who dont know what this thread i s about.


http://i153.photobucket.com/albums/s206/ShopDelta/Kick%20panels/2040800_90_full.jpg

http://i153.photobucket.com/albums/s206/ShopDelta/Kick%20panels/641719_97_full.jpg

http://i153.photobucket.com/albums/s206/ShopDelta/Kick%20panels/641719_95_full.jpg

I know a guy who has real nice ones in his tc ill try to get pics up for tonight.



This isnt something anybody produces its all custom. But if enough people are interested. I'll be the first to produce them. Or the 2nd at a cheaper price if somebody beats me to it! haha

I'm sorry but IMO that looks retarded, it sticks out way too much!

kicks used to be really popular where i grew up about 8-10 years ago... especially in mustangs. they needed all the help they could get in getting a balanced sounding system. I had a set in my 93 GT but the thing is it was so uncomfortable on long trips to rest your legs around them that they were not worth it.. get a good component set and you don't even need them..

thats why i think i am going with DLS or some other higher end.. save the money you will spend on kicks and get good components and you will be just as happy

Also remember its not as easy as just making a pod and putting speakers in it. The purpose is to bring the front stage away from the ear, and ALSO ALIGN IT. If you do not have the speaker angled properly, it is going to sound absolutely horrible.

With something like this, unless you are an audio guru, you will not benefit by doing it yourself, or having just ANYONE do it for you. You need a pro to make them!

8) They'll be good..... they'll be good...

Im gonna make them in a way that they dont get in the way as much but in a way that theyll look real nice, and in a direction that itl stabalize the sound in the car more and increase the quality. Im always open to suggestions and Ideas and let the flame begin if anybody wants to, every modd isnt for every person some people will like some thing some people wont.

PS I didnt make those 2 kick panels, I just searched and found them. Yes they are kind of bulky and strange but thats jsut the idea of what the askers want. If I make them, they will be smooth and would flow with the interior.

There's not enough room to just put them in. You'd lose the dead pedal (which sucks for MT ppl) or end up moving all the wires around behind the kicks. It's not practical for most people and rocketgyrls I believe required cutting into the sheet metal behind the kicks. Q-Logic makes off the shelf kicks for lots of cars but it's not practical for our car.

you'd need to use very slim speakers. i would recommend an audio specialist make them.

8) They'll be good..... they'll be good...

Im gonna make them in a way that they dont get in the way as much but in a way that theyll look real nice, and in a direction that itl stabalize the sound in the car more and increase the quality. Im always open to suggestions and Ideas and let the flame begin if anybody wants to, every modd isnt for every person some people will like some thing some people wont.

Its not that easy tho. the quality and the build is just a fraction of the setup.
You need to have major experience in the audio world to make them work. its not just throw them in there and hook up wires. You have to have the angles right, and the distance correct. If you cant get a straight line of sound, you have to have experience in reflection. And then someone to tune it all for sound timing.

or do a three way setup, mid bass in the doors, and small mids and tweets in the kicks.

for now i'm just going to use the stock location for the woofer, and i'm going to put my tweeters in the kick panel. the woofer is already pretty low in the door and also pretty far up in the door. deadening and sealing off the doors will make the woofer sound really good in the stock location.

i would be interested to see you make a set though. maybe i'd someday use them in a three way setup.

another thing to add: woofers, especially large power hungry ones need airspace behind them to make any sort of midbass. so they would need to be pretty large.

A three way active setup would be nice. I have considered it!

i'll be doing a 3 way active setup this winter with some dls ir 6.3's. should be sexy

Have you considered the iridium 6.5s instead?

i'll be doing a 3 way active setup this winter with some dls ir 6.3's. should be sexy

if or when you do make a thread about it. let us know the progress with pics and a how to as well. i would like to see it.

i'm trying to do an SQ install, but i'm on a budget. i won't be competing or anything, i just want a nice clear full sound. but i would be interested to see other people installs as well.

Have you considered the iridium 6.5s instead?

uhh.... those don't exist... that would be a 5 way.....

Have you considered the iridium 6.5s instead?

uhh.... those don't exist... that would be a 5 way.....

I vote for 8.3s. :)

8.3's would be nice but i don't know if i could do what i want to do with an 8 inch midbass

care to share? or is this a secret until it's unveiling?

like everything with the new car its a secret until the unveiling in march

I did a search to help you guys out on what hey kind of look like for the people who dont know what this thread i s about.


http://i153.photobucket.com/albums/s206/ShopDelta/Kick%20panels/2040800_90_full.jpg

http://i153.photobucket.com/albums/s206/ShopDelta/Kick%20panels/641719_97_full.jpg

http://i153.photobucket.com/albums/s206/ShopDelta/Kick%20panels/641719_95_full.jpg

I know a guy who has real nice ones in his tc ill try to get pics up for tonight.



This isnt something anybody produces its all custom. But if enough people are interested. I'll be the first to produce them. Or the 2nd at a cheaper price if somebody beats me to it! haha

How much for the first one?

delta didnt make either of those

I stated I didnt make amy of those in case anybody thinks I did. About actually building them. You dont need to have it setup as perfect as it can be to have a good sound. Even if its setup with a slight angle towards the center like the one above, itl sound good. Im not disagreeing with you guys though. I know that speakers to sound the best, they have to be aligned at a certain angle but its not necessary unless you truley want it to be like an award winning setup. Most people are happy with just having it look nice and sound good. I nkow I do, Im gonna maek them for me and I just want it to look ince, not be so big, and sound good.

Chitown I PMed you.