OKAY....so...I have the EBC Greenstuff front pads....PowerSlot front rotors...

If I go below 5MPH and press the brake I get a God Awful Grinding noise from the brakes...
that okay?..
Somehting I need to worry about???

Also..I have only had that brake rotor combo for 5 months now...already starting to get a Minimal squeal....is cuz of colder weather????....wasnt sure!

Thanks everyone if u can help!!!

did u break them in properly? or did u start stomping on ur brake pedal like everything was good from the start?

did u break them in properly? or did u start stomping on ur brake pedal like everything was good from the start?

Way back when I installed everything...

I did the 5 or 6 times of going up to about 40MPH then break....

then another 5 or 6 times around 55MPH....

They dont make a sound at Reg. speeds and braking...

ONLY when I am going under 5MPH then add pressure to the brake...Like going through a Drive-Thru...etc..

i think ur rotars are uneven, or wasnt resurfaced properlly... well thats what my mechanic said about my stock rotors..
i had the same problem... slow speed brake causing a continuous scraping noise..