TheHundreds
10-14-2007, 05:58 PM
Ok, I have done some reading. I know people have put the HID's in the VRD fog lights. But has anyone put them in the stock fog lights?
|
View Full Version : HID's in stock fog lights... Krayzie_Los 10-14-2007, 06:11 PM http://i41.photobucket.com/albums/e288/Krayzie_los/08%20tC%20Headlights/DSC00567.jpg fogs off http://i41.photobucket.com/albums/e288/Krayzie_los/08%20tC%20Headlights/DSC00559.jpg with fogs on http://i41.photobucket.com/albums/e288/Krayzie_los/08%20tC%20Headlights/DSC00565.jpg BlizZard 10-14-2007, 08:39 PM DAMN!!! nice lol Krayzie_Los 10-14-2007, 08:51 PM oh yea, K-lite 8000k HIDs in the headlights and cheap ebay 8000k HIDs in the fogs TheHundreds 10-14-2007, 10:00 PM Wow. That look great. Are those stock headlights? Because theres a decent cut off there. Noodle 10-14-2007, 11:45 PM There too much glare. The areas above the cutoffs has too much light exposure. This is caused by the opening in the cutoff shield. I think there is a thread somewhere that give you instruction on how to close the small opening in the cutoff shield. TheHundreds 10-15-2007, 12:12 PM And how hard is it to get to the foglights? Krayzie_Los 10-16-2007, 02:38 AM the headlights are from the 08 tC. you should of seen it before i bent the squirrel spotters down, it's actually not that noticeable now the fog lights are fairly easy to get to, pop a few clips off the bottom and reach in.... it's finding a spot to mount the ballast that's a little harder, or in my case, finding room for a total of 4 ballast. i chose to take off the whole bumper since it takes me less then 5 min to pop it off.... |
|