Hey guys just thought i would share this, scangauge is offering a FREE upgrade for all users who bought a Scangauge II after July 27, 2007 and $25 for all other users..the upgrade offers many new features such as instantaneous HP readings

link : http://www.scangauge.com/support/xgauge.shtml

 

thats kinda cool if only it had a wideband built in

 

DAMN.....I want a scangauge so bad.....

 

well maybe if u didn't have that m3 bumper...

 

just go for a safc

 

Good find! i shall send mine in!

 

Good call on the upgrade program...All new orders have been getting the latest version and they tell you how to check to see if you need the upgrade to unlock the gauge.. I have a deal on these right now and all will be fresh sw loads...now to send mine in I'm at version 3.00!

 

THANKS ZACK!!! Check my version and its 3.14! I dont have a prius so who cares about the 3.15. but thank God i pass the cutoff for the older versions.

 

I still need to do this myself so I can play with it...try the HP Xgauge setting and let us know what you get! If you need the instruction files I can email them to you, just let me know zack@365motorwerks.com

 

ok, so... how does this upgrade work? how do i know if i need to send it in or not? or does everyone have to send it in? im a little confused

 

To check your version go = Home>more>more>more>version

If you have a 3.14 or 3.15 your already up to date. if not then send it in for a upgrade.

I just added the HPR to my scangauge!!! Wow it does work, but when i rev it only goes up to 25. I thought the tc was 160 hp?!?! anyways im still trying to figure how to get the miles to empty reading as a gauge display.

 

Displaying a Trip Value as an XGAUGE
You can take any of the trip values and have them displayed as a gauge.
This allows you to monitor trip functions along with other gauge
functions.
To start, from the HOME screen use MORE>MORE>MORE>XGAUGE
then select the number of the XGauge memory you want to use (0 to 24)
then EDIT.
In the TXD screen, the first character determines which trip function
will be displayed. The choices are:
• 0 = Average Fuel Economy
• 1 = Fuel used
• 2 = Max Coolant Temperature or Fuel Remaining for TANK trip
• 3 = Distance
• 4 = Max RPM or Distance to Empty for TANK trip
• 5 = Time
• 6 = Max Speed or Time to Empty for TANK trip
• 7 = Average Speed
• 8 = Cost
The second character determines which trip to use.
• 0 = CURRENT Trip
• 1 = TODAY Trip
• 2 = PREVIOUS DAY Trip
• 4 = TANK Trip
NOTE: 3 is skipped for the trip selection. All entries other than those
shown are undefined.
For instance you may want to use how long you have been driving
today as a gauge. To do this, the first character would be 5 for Time. The
second character would be 1 for TODAY.
+51 »
- TXD OK>
Now press OK. For RXF, make the first character an 8 as shown below.
+800000000000 »
- RXF OK>
An 8 as the first character is a special condition that tells the
ScanGaugeII that this is to be a trip gauge. All values after the 8 are
ignored.
Next, press OK until you reach the name screen and enter a name. For
example, TDT for Time Driven Today. Finally SAVE the new gauge.