Just wondering if anyone has the Drag DR20 15x7 +10mm on yet? I justed wanted to see some more pix of them on some dropped xBs


Cya
Keith

Haven't seen these yet... pix?

http://www.scionlife.com/forums/viewtopic.php?t=189914

Nice... someone needs to pick up a set of these... if I didn't just get wheels I'd be all over em.

I'm thinking about picking up a set at the end of the month.

Keith get 'em!

Oh yes Fred, I will be getting them..... quite soon I possibly.


Keith

Oh yes Fred, I will be getting them..... quite soon possibly.


Keith

you should get the real Axis OG rims....

The Axis ones are still copies of Works...

I actually like the stepped lip on the Drags much better, not a fan of the Axis flat one.

i was looking at getting these.. until i realized they dont make them any wider then stock.. wanted the gun metal/machined ones for my shadow mica xb.. but i want a wider tire..

stock is a little narrower...

well they dont make 8".. i'm trying to build my box to handle really nice.. want a bigger footprint..

For the price, the Axis rims are not worth it. I go through wheels every few months, and the drags fit my budget at the moment. And I agree with Boxer, I like the stepped lip much better.



Keith

For the price, the Axis rims are not worth it. I go through wheels every few months, and the drags fit my budget at the moment. And I agree with Boxer, I like the stepped lip much better.



Keith


hey that sounds like me :P

I think you can get them in a 0 offset also

^^^ Wow, crazy.

BTW, saw in another post that Continental makes a 175/55/15 tire, that would be sick on these wheels.

Does the zero offset have more lip?

0 offset isnt in our bolt pattern, just 4x114.3

Bummer.
Keith

Well I ordered the wheels today... black face 15x7 +10mm.

Thinking about running a 195/55/15 tire. About the same overall as stock. Anyone have any other ideas..... ?


Keith

Well I ordered the wheels today... black face 15x7 +10mm.

Thinking about running a 195/55/15 tire. About the same overall as stock. Anyone have any other ideas..... ?


Keith

that was what i was thinking of getting but with a 195/50/15 tire....but right now im unsure of what i want........

Yeah, I like the 195/50 its just like 4% smaller than stock.... thats a small tire haha.

yea im riding on them now and and the ride is lets just say there decent :P

you're on 195/50/15 now? I can hardly keep up with you haha! I may go that route then, do you like them? Decent gas millage? Not too bad of a ride? I just don't want the ride to be too crappy ya know?


Let me know before I go to order here in a few days.


Thanks!!!
Keith

you're on 195/50/15 now? I can hardly keep up with you haha! I may go that route then, do you like them? Decent gas millage? Not too bad of a ride? I just don't want the ride to be too crappy ya know?


Let me know before I go to order here in a few days.


Thanks!!!
Keith

well since im basically slammed all the way or as far as i can go with the Tein Basic Coilovers and the profile being so low i cant really get over speed bumps :P but i luv the look and as far as gas milage goes i cant really tell cuzz im always gunning my box....ride quality is ok IMHO you can basically feel all the bumps and stuff in the road but its do able....but yea im riding on these Drag Dr-29
at the moment
http://www.discounttiredirect.com/product/wheels/drad29.gb.ang.jpg

I'm thinking about getting these in the machined gold color with the +10 offset. I have an RS4.0 anybody opinions?

I'm thinking about getting these in the machined gold color with the +10 offset. I have an RS4.0 anybody opinions?

i would say the black or gunmetal color would b best

I agree, black would look best on RS4

Mine should be here this week I hope! I'll post pix.

Jason: I did end up getting some 195/50 tires..... I can't wait to get these on!


Keith

I agree, black would look best on RS4

Mine should be here this week I hope! I'll post pix.

Jason: I did end up getting some 195/50 tires..... I can't wait to get these on!


Keith

kewl man just becareful with the bumps and all but i think these will should have a better rebound then a 40 series tire so that the rims wont get bent to easily when hitting a bump at high speeds

hey thanks for all the feedback guys. I just ordered a set of Sportmax 501s in hyper silver +15 offset, wrapped in 195 50 15 Falkens. I'm dropped on 2" JDM springs. It should look pretty tight.

Mine showed up today :clap:

I'm going to try to have them on by Saturday, in the mean time, here are some pix of the wheels.... for the price, I'm super stoked.... and completely happy with them.

http://img.photobucket.com/albums/v606/xkeithx/dr20-1.jpg
http://img.photobucket.com/albums/v606/xkeithx/dr20-2.jpg
http://img.photobucket.com/albums/v606/xkeithx/dr20-3.jpg

Those look beautiful... can't wait to see em on.

Those are sweet Keith! Bring the ride to the Tea Station meet :P

ooo nice......ill be gettin mines in soon as well just waiting for them to get shipped out should be about a week or so.....then eventually i will move on to the bbombs.......

Well I couldn't wait till saturday to get them on, so here they are. Caliper in the front had to be shaved down and excessive fender rolling in the back to make them fit, but I'm very pleased with them!

DR20 +10mm
195/50/15
Progress Coilovers almost 4" Drop
-3 Camber Shims

Dont mind the primer bumper and dents and crap, I'm going to finally finish the paint work at the end of March.

http://img.photobucket.com/albums/v606/xkeithx/dr20on-2.jpg
http://img.photobucket.com/albums/v606/xkeithx/dr20on-1.jpg

I retract my previous statement, Now I wish I had gone with those when I had the chance, they look better than I thought!

they look good man now i wished they mad these the same way in 16s :P but 15s will do....i also might have to do away with the center cap it comes with and use the center caps from my Dr-29 (hoping they fit and all) cuzz i think they stick out to far....so you had to roll the fenders? do these have the same caliper clearence problems as the old ones did? well i guess i gotta wait n c how it looks on my box to decide wheater or not to raise or keep the back tucked.....is there a lower profile for 15s? like a 45 or 40 profile? man look at all these questions im askin :P

I need to change the centers for sure! You'll need to grind the caliper down just a little bit in the front... not too much though, and seriously seriously roll the fenders a ton to get them to tuck haha, but they fit sick once all that is done.

Keith

Lookin great man.

Jason, can you measure the DR29 center cap width for me to see if they'll fit? It needs to be about 2.75" across.


Keith

Jason, can you measure the DR29 center cap width for me to see if they'll fit? It needs to be about 2.75" across.


Keith

here's what i got hope it helps......had to jack up the car and what not to take these flix so yea.......i would say its pretty close to 2.75 across from one end to the other.....and sry for the cam phone flix.....

http://i46.photobucket.com/albums/f110/j202av/7e4bf456.jpg
http://i46.photobucket.com/albums/f110/j202av/27a9022e.jpg
http://i46.photobucket.com/albums/f110/j202av/14bb51a6.jpg
http://i46.photobucket.com/albums/f110/j202av/9f34ec72.jpg
http://i46.photobucket.com/albums/f110/j202av/52f7f232.jpg
http://i46.photobucket.com/albums/f110/j202av/63e348c5.jpg
http://i46.photobucket.com/albums/f110/j202av/5a550b91.jpg
http://i46.photobucket.com/albums/f110/j202av/661670ec.jpg

nice! Maybe I can score a set!

Discount has them for $9 each... sick!

Discount has them for $9 each... sick!

really? did you call em or something? and that is a good price....i might just order a set from them so that i dont have to take em off of my DR29s

Those are much better than the stock DR20 caps, good find!

Yeah, they said just call to place the order.

Keith

i'm running 195/60/15's now on steelies with bling rings, (beefy tires, imo), anybody have those on these, or any ideas how it'd look? I've got an inch and a half drop now and no gap as it is....

i'm running 195/60/15's now on steelies with bling rings, (beefy tires, imo), anybody have those on these, or any ideas how it'd look? I've got an inch and a half drop now and no gap as it is....

it will give you the beefed up look......id say it would b like a inch or two bigger then what he already has.....

http://img.photobucket.com/albums/v606/xkeithx/dr20on-2.jpg
if i can recall i think i had 195/60/15s on my old dr20s

http://i6.photobucket.com/albums/y240/omfgxitsxj/DSC03082.jpg
http://i6.photobucket.com/albums/y240/omfgxitsxj/DSC03050.jpg
http://i6.photobucket.com/albums/y240/omfgxitsxj/3.jpg
http://i6.photobucket.com/albums/y240/omfgxitsxj/DSC03044.jpg

IMHO it looks fine with a 60 profile tire but from going threw so many sets of wheels and stuff i just believe the smaller profile would make the wheels look alot better but thats just me.......but i dunno how keith feels about he tire selection though.......[/img]

cool cool thanks for the follow up, anybody else/ opinions or pics of 60 profile tires on 15"s? (also, what kinda drop you got, if you post pics)

thanks
jeff :)

edit: How do these fit/look WITHOUT any spacers/camber too? And would i have any problem with a 2 inch drop, per say? (i've got 1.5 inch now, but am gonna get new springs/shocks, as mine are 100k miles old, lol)

You should be fine w/ a 2" drop maybe a little little fender rolling in the back. Camber isnt really even needed with my 4" drop, but rolling the fenders would still be a must, it just looks better IMO.

Cool thanks Keith, would I NEED the fender rolling, or do you just think that makes it look better (or both)...i don't wanna be rubbing right from the start.... I take it the wheels sit out further than stock

Thanks

Jeff

Jeff, yeah when you go to sick them on, just tap the lip of the fender with a hammer and bend it in a little bit. You should be fine after that. You may not even have to, but you down want brand new tires to rub..... like mine did haha.

Cool, after I pay my taxes and a few more bills, I may have to get me some of these! LOL

Thanks mang :-)

jeff

i maybe getting my wheels sometime this week and if not it should arrive within the coming week....cant wait to get em in........

Jason! Post pix of the centers on one of them too if you could. I'm still deciding on what to do about mine.

Anybody have pics of black wheels on a black xb by chance? I cant make up my mind 100%, black or gold....polished face or no polished face, lol...

No polished face FTW. It looks so much better with the all color face IMO.

Keith

i've had both black and gold wheels on my BSP Xb you can look at my profile for the flix but as far as the DR20s are concerned i've onlee had the gold but the ones im gettin in now are black........but yea Keith ill take flix of em with the centers on; hopefully they fit *fingers crossed*

LOL well hey, post up pics when you get em "itsme" :-P

Shoot, then again I may end up getting nilo's, lol, i dunno, i gotta pay some taxes first and a few bills so it'll be a month or three...

i've had both black and gold wheels on my BSP Xb you can look at my profile for the flix but as far as the DR20s are concerned i've onlee had the gold but the ones im gettin in now are black........but yea Keith ill take flix of em with the centers on; hopefully they fit *fingers crossed*

Cool cool, looks good, when you gettin the new set?

man that drop is beautiful. im running a SportMax 501 with the same rubber. 195/50. and times are rough for me :-P skrape skrape. but no tire rub at all. im running s-techs and 10mm OTG spacer. kit looks good too.

i think i should have gone a chunky tire too but i wanted the stretched look.

I bought a set of these center caps at a local auto swap meet today for $16. Hope they work!!!

http://cgi.ebay.com/ebaymotors/2-3-4-2-75-Center-Caps-Datsun-280ZX-Riken-Mesh-Wheels_W0QQcmdZViewItemQQcategoryZ43961QQihZ019QQitemZ290210590363QQrdZ1QQsspagenameZWDVW

i've had both black and gold wheels on my BSP Xb you can look at my profile for the flix but as far as the DR20s are concerned i've onlee had the gold but the ones im gettin in now are black........but yea Keith ill take flix of em with the centers on; hopefully they fit *fingers crossed*

Cool cool, looks good, when you gettin the new set?


sry for the wait just been busy but yea i got the wheels in on friday and got em put on saturday cuzz it took ups all day to drop off the goods.......

but yea Keith the DR29 center caps wont fit they are to small for the DR20s apparently.......

here are my camara phone flix cuzz i dont have a camara at the moment since it broke :tap: but yea hope these help......im running a spacer in the front cuzz i dont feel comfy griding down my calipers and as for the back i didnt roll the fender but will have too so i can put ppl in the car......im sittin on Tein Basic Coilovers with the front all the way down and the back almost all the way down had to have it high enough so it wont rub......IMHO i think the back should b spaced out a few millimeters so it would sit flush with the front.......not sure if i left anything else out but if u got any questions just ask

http://i46.photobucket.com/albums/f110/j202av/1c182542.jpg
http://i46.photobucket.com/albums/f110/j202av/7de02227.jpg
http://i46.photobucket.com/albums/f110/j202av/724504e3.jpg
http://i46.photobucket.com/albums/f110/j202av/090fec0e.jpg

ill try to take more flix when i get a chance.....

looking good Jason!!!

looking good Jason!!!


thx man....here are a few more camara phone flix i took b4 this post......

http://i46.photobucket.com/albums/f110/j202av/3507832f.jpg
http://i46.photobucket.com/albums/f110/j202av/52e30835.jpg
http://i46.photobucket.com/albums/f110/j202av/87ed972f.jpg

dont mind all the grass and what not haha just trying to make a long term investment on a few acres of land.........

dude, the black looks better on black imo, thats what i'm getting!
lol

what size tires?

We're both on 195/50/15's unless Jason switched it up on me haha.

Keith

We're both on 195/50/15's unless Jason switched it up on me haha.

Keith

yea its 195/50/15s its just that the falken 512s for some reason give it a streched look compared to the falken 912s i have on the front.....

Looks sharp, I think i'll hve to go with the black for my Black Box....last question, waht kinda drop you on, itsme?

box looks sharp btw, props!

Looks sharp, I think i'll hve to go with the black for my Black Box....last question, waht kinda drop you on, itsme?

box looks sharp btw, props!

thx man but yea id say 3 inches plus.......i have tein basic coilovers.......since i've put these wheels on for some reason or another by box was raised up quite a bit because with my dr29s with the same tire and all i was so low i couldnt go over a speed bump and now i have no problem with speed bumps.....maybe i have to much air in the tire or something.....

thinkin about getting these wheels aswell what kinda spacer would you use for the front so you dont have to grind it down and what size spacer should be used for the back to make it all flush

thinkin about getting these wheels aswell what kinda spacer would you use for the front so you dont have to grind it down and what size spacer should be used for the back to make it all flush


well as far as the front goes i think i have 3mm spacers but im thinking about machineing it down with a lathe or one of the drill presses i have here at home......as far as the back goes im not to sure about that yet cuzz i havent tried anything yet cuzz i havent rolled/cut the rear fenders yet and maybe a lil fender pulling so i can still tuck the tires after putting spacers on.....

Here are the results of spacing the rear wheels out with a 5mm spacer.......the tire will still rub even if you roll the fender (well how i did it anyways) i would recommend getting the the rear fender cut/trimmed then get some spacers and chamber plates like 2 degrees then you should be fine....

I bought a set of these center caps at a local auto swap meet today for $16. Hope they work!!!

http://cgi.ebay.com/ebaymotors/2-3-4-2-75-Center-Caps-Datsun-280ZX-Riken-Mesh-Wheels_W0QQcmdZViewItemQQcategoryZ43961QQihZ019QQitemZ290210590363QQrdZ1QQsspagenameZWDVW

These center caps fit perfect. A little shorter than the Drag ones... but no logo :)


Pix to follow this weekend. I should be done painting the car tomorrow.



Keith

I wonder if the equip 03 caps are any smaller or if they even fit

I wonder if the equip 03 caps are any smaller or if they even fit

i think they are smaller

http://i72.photobucket.com/albums/i171/1badxb/xb1.jpg[/img][/url]

dude, badxb, that's sharp man, i'm getting the black ones for sure for my black box....looks really clean, post more pics!

dude, badxb, that's sharp man, i'm getting the black ones for sure for my black box....looks really clean, post more pics!

Thanks for the props I will post more shortly. Can't tell in this pic but I tried going for the "Stagged" look using the regular DR20's up front and the low offset in the rear. Again thanks for the props.

x2 on your wheels i prefer the machined face like you have but im going to do low offset all around did you have to shave your caliber down a little bit to get them to fit as well

:shock: :D :wink: :P
look at her all wet and stuff she so freakin sexy haha

http://a663.ac-images.myspacecdn.com/images01/59/l_005780363c6901f7a4979d9763e7cfce.jpg
http://a151.ac-images.myspacecdn.com/images01/46/l_fb74bf50394dd2a86e6234378f807276.jpg
http://a335.ac-images.myspacecdn.com/images01/109/l_76bcabcfa25abddd5f8c4c1bfc266ed6.jpg

all new again well except for the damaged areas you can c on the front bumper........ :tap:
http://a813.ac-images.myspacecdn.com/images01/101/l_5658e1b3ec0ab648280c48d1ee0809c4.jpg
http://a842.ac-images.myspacecdn.com/images01/72/l_70bab2fe5afb0f1a4326bcdd043c93b9.jpg

Lookin hot bro...

Lookin hot bro...


thx man


I bought a set of these center caps at a local auto swap meet today for $16. Hope they work!!!

http://cgi.ebay.com/ebaymotors/2-3-4-2-75-Center-Caps-Datsun-280ZX-Riken-Mesh-Wheels_W0QQcmdZViewItemQQcategoryZ43961QQihZ019QQitemZ290210590363QQrdZ1QQsspagenameZWDVW

These center caps fit perfect. A little shorter than the Drag ones... but no logo :)


Pix to follow this weekend. I should be done painting the car tomorrow.



Keith

cant wait to c how they will look on the wheels....might have to go lookin for center caps too cuzz you can just pop these off way way to easy as in you can just grab and pull and wahla your caps just got jacked or just popped off from a hitting a speed bump......

Here it is.... the finished product.... check this tread for all the pix>>>
http://www.scionlife.com/forums/viewtopic.php?p=3255064#3255064

http://img.photobucket.com/albums/v606/xkeithx/6.jpg

x2 on your wheels i prefer the machined face like you have but im going to do low offset all around did you have to shave your caliber down a little bit to get them to fit as well

I had to go w/a small spacer in the front that's all

http://i72.photobucket.com/albums/i171/1badxb/CaddyScion007.jpg
http://i72.photobucket.com/albums/i171/1badxb/CaddyScion003.jpg
http://i72.photobucket.com/albums/i171/1badxb/CaddyScion005.jpg
http://i72.photobucket.com/albums/i171/1badxb/CaddyScion006.jpg

http://a712.ac-images.myspacecdn.com/images01/64/l_a9518af2c013b578ff6820113c7fd31f.jpg

still trying to figure if i want machined face or black face for my TCM both look great, will be ordering in a little over a week

i still say all black... when I had my machined face ones they just looked too cheap.


Keith

Where Did You Guys Buy Your Rims From? Was It Online Or A Shop In Your Area?

Hawaii Shops Are A Rip Off Charging Almost $650 To Ship.

http://www.scionlife.com/gallery/personal/14412_17.jpg
http://a234.ac-images.myspacecdn.com/images01/44/l_86ae50e0be4bfee65d584279713a4221.jpg

do they make the low offset in gold with machined face?

yes they do

so the low et10 DR-20 will only fit with a 3mm spacer up front, correct?

so the low et10 DR-20 will only fit with a 3mm spacer up front, correct?

actually its always been like that with the dr-20s to my knowledge cuzz i had a gold set when dr-20s first came out and i had to put spacers in the front to clear the caliber and the wheel size was 15x7.5.......but yea you need some kind of spacer in the front to clear the caliper or you can just grind it down like keith did with his....

oh wow, good to know, so these will NOT fit stock in the front then...

nope

whats a set of the spacers cost for the front? (hell, does it look better with them in the back too?)

Pep boys/kragen for the front spacers like $15.

Keith

Thanks, got a part # by chance?

just go to the wheel section in pepboys/kragen and basically buy the universal four lug wheel spacer

awesome thanks... :)

I did the same... Went w/a cheapo PepBoys spacer in the front and I was good to go. This is the best view I have. Doesn't look to bad using the spacer up front.

http://i72.photobucket.com/albums/i171/1badxb/CaddyScion001.jpg

why does your front wheel look like it has a higher offset then the rear? lip size is diff. is the rear +10 and rear the +40 with spacer?

I have the regular DR20's in the front and the Low Offset's in the rear to give the wheels a "Stagged" look.

nice! oh, any spacers in the back, or is that stock? Looks good front and back..

No Spacers in the back. Perfect fit!!!

was curious if 225 50 15 tires could be run on these rims with df210 drop?

Not sure. My buddy has the DR30's with 205/50/15 using the hotchis drop and it sits nice.

originally interested in getting the 501's, but these look good too. hmmm, what do get?

Hey keith, kinda a late post, but how's the ride on those 195/50/15's? LOL

i have put these on order at a discount tire, they said they wont work with spacers at all though. I'm guessing ill just have them mount and balance them and ill put them on with the spacers? There isn't a risk for those small spacers is there? They put them on my old corolla a long time ago......

Oh, gold full painted low offset

btw, anyone had any problems with the finish on these? for a cheap well, do they hold up well?

^ post pics wen its on.. i'm still debating which color to get on my pw

my boy had the full gold on his PW and it was nice...not the low offset though...but nice nonethe less

btw, anyone had any problems with the finish on these? for a cheap well, do they hold up well?

Thanksgiving weekend made it my one year anniversary w/the wheels and the only complaint I have are the wheel caps fading but that's it. I wax the lips of the wheels every 3 months. no probs yet. (knock on wood)

got my interior and valve cover done in gold, waiting to sell current wheels....anyone have any more pics with the low offset for me to look at?

a got some flix on my myspace.....

http://viewmorepics.myspace.com/index.cfm?fuseaction=user.editAlbumPhotos&albumID=1439712&MyToken=ccf32fed-b604-4579-819d-88bc06d9196b

i really want to get these now. i got a TCM and lowered with

tein s-tech's 1.7F/1.5R if i remember right. i have rolled fender's front and rear.

i wanna get the black with the machine face.

now my question is would i still need to get a rear camber for the back??? even if it

has been rolled.

will i still rub if i get 195/50/15's on with the 10 offset??? do i really have to grind

that lower piece in the rear??? i saw a post about it somewhere.

how much does it poke out in the front?(with or without the spacer)

does anyone got good pics of this or can take

one at least so i know for sure what iam getting into.

is it tucked in the front as well.i wanna get that flushed look. is the spacer really a

must to get.

iam on 16x8's with a 0 offset. but iam really considering dropping back to 15's.

thanx.sorry for the many questions.thanx in advance guys.

so that leave's my 16's for sale.and up for grabs.with TIRES.

i really want to get these now. i got a TCM and lowered with

tein s-tech's 1.7F/1.5R if i remember right. i have rolled fender's front and rear.

i wanna get the black with the machine face.

now my question is would i still need to get a rear camber for the back??? even if it

has been rolled.

will i still rub if i get 195/50/15's on with the 10 offset??? do i really have to grind

that lower piece in the rear??? i saw a post about it somewhere.

how much does it poke out in the front?(with or without the spacer)

does anyone got good pics of this or can take

one at least so i know for sure what iam getting into.

is it tucked in the front as well.i wanna get that flushed look. is the spacer really a

must to get.

iam on 16x8's with a 0 offset. but iam really considering dropping back to 15's.

thanx.sorry for the many questions.thanx in advance guys.

so that leave's my 16's for sale.and up for grabs.with TIRES.


I have the same questions. I want to get the same finish as well, cause i rub with the new coilovers I got. My rims now are 15x7.5 with a +0 offset

....exactly....

any body else here ROCKing the DR20's.

please post Up pics. especially the ones with the low offset please! post SOME PICS.

with good angles.

thanx.in advance.

ya i want more pics too. i really like these, but i feel like the 15x8 xxr look is more aggressive..... i dunno

Did anyone find a good center cap for the rims yet? If not I looks like these would fit.

They are the Konig Maxxim Screech

http://jlbmotorsports.com/PICS/KONIG/15_screech_gold.jpg

http://jlbmotorsports.com/PICS/KONIG/15_screech_gold_side.jpg

i like that they are not dual drilled, but are too weak in the lip department

i like that they are not dual drilled, but are too weak in the lip department

x2...yup too bad for the lip department.

i want to get the dr20 low offset for my xA. i want to know if im going to need front wheel spacers or have to grind my calipers? thanks

mmmm...tasty