If you run 7.0×17 wheels on the Scion, try and get at least an offset of 30-35 or lower.

7 x 17 ??? ...Damn that's one small and very wide set of wheels!!! j/k :lol:

same here, I was trying to come up with a joke before I opened the topic and it actually was about wheels....someone gunna have to do a ____load of cutting for that puppy to fit but I bet the look would be MEAN....like a little steamroller in the rear

Right Right...you'd rehave to dropp the car at least 8' drop to cover the gap, not to mention the flares you'd need for those wheels...damn the car's gonna end up looking like a lawn mower. :lol:

If you run 7.0×17 wheels on the Scion, try and get at least an offset of 30-35 or lower.
im running 17x7.5 with 40mm offset and it fits great! tires are 215/40/17

If you run 7.0×17 wheels on the Scion, try and get at least an offset of 30-35 or lower.
im running 17x7.5 with 40mm offset and it fits great! tires are 215/40/17


I told you they would look good!

If you run 7.0×17 wheels on the Scion, try and get at least an offset of 30-35 or lower.
im running 17x7.5 with 40mm offset and it fits great! tires are 215/40/17


I told you they would look good!

If you want your wheels more flush to the side of the car, go with 30-35...that's what he was refering to. Higher offsets FIT, but most people like them wheels more flush, instead of sunken inside the wheel well. I emphasize again, higher will fit...just don't go over 44 or so...it won't even fit then.

The Lamborghini Murceilago has 18x13 in the rear =P