Here is a couple pictures of the New Xb header. It is a 4-2-1 Design. Dyno numbers will be posted soon. The S pipe will be available for sale by itself, for those that want to purchase it by itself.
http://i143.photobucket.com/albums/r134/cee_dub2007/2008headerinstalled.jpg
http://i143.photobucket.com/albums/r134/cee_dub2007/2008XBheaderspipe.jpg

Any questions feel free to email or Pmail me.
Chris.Wanstrath@Weapon-R.com

looks good!

WOW now that LOOOKS SWEEET-headers and S-Pipe set!!!!! Any word on Price??

Damn that looks good. Very nice job there.

more options is always welcome! i thought there was an o2 sensor on the s-pipe? or did i understand wrong from the strup header thread? also, more details!!

Very nice!

How does the car "feel" with it?

Thats pretty sweet there! Quite a bit different from the tC one. If I do decide to get a header im definitely forking over for this one...

ahhh did you bottom out on that oil pan :/

ahhh did you bottom out on that oil pan :/

They look like water spots or dirt........

more options is always welcome! i thought there was an o2 sensor on the s-pipe? or did i understand wrong from the strup header thread? also, more details!!

there is a sensor in the "S" pipe. its back a little further. i'm sure this pipe will have a bung welded in and you'll probably need the CEL eliminator as well. i have the strup header and the cel eliminator works great!!!

we need the third cat thing replacement part...that ill buy for sure!!!

bump for dyno info...
-nick

This header eliminates the cat, so its not 50 state legal? Here in Pa, we have to undergo a strict emmisions test every year.

This header eliminates the cat, so its not 50 state legal? Here in Pa, we have to undergo a strict emmisions test every year.

i'll have the same problem in 2011 when my inspection sticker dies. thats why i kept the stock manifold. :P

correct me if i'm wrong... don't we have a emissons exempt sticker on our xb's

Yeah, I'm interested in this before I buy one, need a price though.

correct me if i'm wrong... don't we have a emissons exempt sticker on our xb's

Yeah because when you buy a new car its always exempt when they put the sticker on because there aren't any miles on it. Any time you put more then 5k miles on your car between inspections they you have to get emissions in PA. my new 08 has the expemt sticker too

any word on ETA ?
of this sexy item

i talked to CarbonPhiber/Phil and it should be out in about a month.

Wow. now I don't know what I want. Thats nice, but I wish it didn't have the WR badge welded in the front like that.

does anyone know if the S pipe will be sold seperately? i have the strup header and want the WR S pipe to help the flow out a bit... :pray:

Here is a couple pictures of the New Xb header. It is a 4-2-1 Design. Dyno numbers will be posted soon. The S pipe will be available for sale by itself, for those that want to purchase it by itself.
http://i143.photobucket.com/albums/r134/cee_dub2007/2008headerinstalled.jpg
http://i143.photobucket.com/albums/r134/cee_dub2007/2008XBheaderspipe.jpg

Any questions feel free to email or Pmail me.
Chris.Wanstrath@Weapon-R.com

that's what i wanted to do to my xb!!!

change up the headers, piping and muffler!

all exhaust.

gotta save up for now.

any update on these sexy things?

Is this better than a 4-1 header?

Header and S pipe looking to be ready in May!

S pipe will be available by itself.

Price? Definetly looking to pick this up.

KOOL CANT WAIT

this going to be ready soon?
eta anybody...
price?

Ok header is looking like end of May / Early June.

what is the diameter on the s-pipe?

these almost ready?
i got the money now
haha

just been waiting and waiting and it feels such a long wait though but at least its coming out. what is the pricing for the header and s-pipe combo

any news on when it's coming out and any pricing yet?

any news on when it's coming out and any pricing yet?

I seconed this

how much wuld you be selling the combo header/s-pipe for?

More pics and latest info!

I cant wait to get the headers and s-pipe :-)

so i see its up for sale has anyone purchased and installed yet ? i think i should get it to make my borla have a little more kick to it

so i see its up for sale has anyone purchased and installed yet ? i think i should get it to make my borla have a little more kick to it


Were did you see it up for sale?

durrrrrr i should read more its the strup header


http://www.nolimitzind.com/headers.html

Emailed them yesterday they say its still in R&D. :(

Booooo

laaaaame! i need this combo! and a glasspack ;)

Well if they need another xB to R&D on (and give me some parts for free) I'm willing to 'sacrifice' my car. I go to school like 15 minutes away.

laaaaame! i need this combo! and a glasspack ;)


Same man and that tenzo cai

Come on weapon R!!

price?

No one knooowwsss

this looks like a 4-1 header, not 4-2-1

looks nice though

more like Weapon ARGHHHHH!!!!!!!1111!!!@1

ETA?

really wanting this

+1

+2

you guys gotta stop rushing... FYI weapon-r is already looking for a 5spd to get the final numbers in before sales begin..

http://www.scionlife.com/forums/viewtopic.php?t=227698

oh sorry i did not see that post
thank u

+3

+3




Here you go!

Weapon R Header and S-pipe Combo


http://www.wesellcarparts.com/store/scripts/prodView.asp?idproduct=8520

Nice, Thanks!
Have you gotten them yet?

Hey guys what's a CEL Eliminator ? im not to familar with this

Nice, Thanks!
Have you gotten them yet?


Not yet, every time i save and get the money ready someing always go's wrong and i gotta use the money for someing else. I was looking at the Strup header little less but still torn between the two. I have an Auto xB and i wanna pull as much power as i can with the right set-up.


Here is a post of an RS5 Auto Getting 3 different mod's done and dynoed b4 and after every time.

http://www.importtuner.com/powerpages/impp_0810_2008_scion_xb_rs5/index.html

They used the AEM Intake, TRD Exhaust and Strup header and got some decent Numbers.

Hey guys what's a CEL Eliminator ? im not to familar with this



CEL ELiminator does not allow the Check Engine Light to go on and wont let your car go into Limp Mode. Once you remove the Header and main Cat you attach the
CEL ELiminator to the S-pipe and take the sensor and plug it to the other side of the Eliminator and Gives the ECU a Correct Air Fuel Ratio Readings.


http://www.nolimitzind.com/cel.html

hey guys i have the header and s-pipe but im having an issue with some rattle .....i installed the ebay scuba tank delete and the mid pipe and kept my factory trd exhaust ...anybody else getting a rattle coming from the front?

hey guys i have the header and s-pipe but im having an issue with some rattle .....i installed the ebay scuba tank delete and the mid pipe and kept my factory trd exhaust ...anybody else getting a rattle coming from the front?


Hmm im gonna ask one of the members of my the car club, i beleave he had the same problem. Def will ask and get back to you on that. Also im gonna be at the scion exposed in sarasota florida i know some guys there who have the same if not close set up.

ok so i fixed this issue by heating the s-pipe up with a torch and bent the pipe more so it doesnt ratte ...thanks for the concern and help

what was it rattling agaisnt.?

hey i just purchased the wr header and s pipe, coming in the mail pretty soon. I was wondering do any of your check lights come on after installing it? or did you have to install a cel eliminator?

hey i just purchased the wr header and s pipe, coming in the mail pretty soon. I was wondering do any of your check lights come on after installing it? or did you have to install a cel eliminator?

I don't have the WR header but you will need to install the CEL eliminator into the s-pipe to avoid a CEL. AFAIK it's included with the header.

It depends on where you buy it from if the CEL eliminator is included or not. Most of the time it is not included, but could be purchased with it.

hey guys recenlty i installed the weapon r header and s pipe with a trd exhaust axle back. when i turned on the engine and i rev it, it sounds like a weed wacker. But i coulnt put back on the o2 sensor on the very back of the s pipe could this be the reason why? im leaking out gas out of my muffler? can u guys show me pictures on how you installed the o2 sensor on the s pipe? mine wont fit.

hey guys recenlty i installed the weapon r header and s pipe with a trd exhaust axle back. when i turned on the engine and i rev it, it sounds like a weed wacker. But i coulnt put back on the o2 sensor on the very back of the s pipe could this be the reason why? im leaking out gas out of my muffler? can u guys show me pictures on how you installed the o2 sensor on the s pipe? mine wont fit.

AFAIK without the O2 sensor the ECU will default to a rich "safe" mode. You really need to install the O2 sensor. The ECU relies on it to determine the correct air/fuel ratio. Running without it can ruin your catalytic convertor, foul your plugs and worse.

Why won't the O2 sensor fit? Are the threads messed up? If so, chase them with the correct size tap/die or go to a shop and have them do it for you. You should have a angled CEL eliminator pipe that installs into the O2 bung on the s-pipe and the O2 sensor goes into that. Sorry, no pics.

The I couldn't get the o2 sensor screwed on because it wouldn't fit I need the elbow cel eliminator. After. I put the c eliminator will the raspy sound go away and have a nice high throat sound? Does anyome have a sound clip with there weapon r and s pipe?

The I couldn't get the o2 sensor screwed on because it wouldn't fit I need the elbow cel eliminator. After. I put the c eliminator will the raspy sound go away and have a nice high throat sound? Does anyome have a sound clip with there weapon r and s pipe?

I imagine it should sound better (and run a lot better too) with the O2 sensor installed. I don't have the W-R header or a sound clip but adding a header does change the sound and add some rasp.