ive got a 16g from an evo 8....its a twin scroll 4 bolt buts its not a t4 but i cant seem to find a manifold for it anyway. Anyone have any experience with this?

Odds are you're going to have to do something custom. Will a tC even efficiently spool up a 16g..?

Odds are you're going to have to do something custom. Will a tC even efficiently spool up a 16g..?


The ZPI kits used a 16G. It's perhaps the fastest spooling turbo used on a tC. The 2.4L displacement spools that turbine to full boost somewhere around 2500rpm.

ive got a 16g from an evo 8....its a twin scroll 4 bolt buts its not a t4 but i cant seem to find a manifold for it anyway. Anyone have any experience with this?

is this turbo different from zpi's? it shouldnt be if its a 16G. just get Todd of Turbo Toyota's Zpi Manifold.

i believe this turbo is different...this is the turbine flange http://www.owendevelopments.co.uk/uploaded/evo6turb0.jpg
its not a T3, not T-anything..its a mitsu evo twin scroll exhaust housing

i believe this turbo is different...this is the turbine flange http://www.owendevelopments.co.uk/uploaded/evo6turb0.jpg
its not a T3, not T-anything..its a mitsu evo twin scroll exhaust housing


The flanges are the same I believe, just a ported housing on the one you have. Turbo Toyotas has a manifold that will work with a Mistu flange. As well as Full Race (who took over the building of log manifolds for ZPI) still can make you a log manifold for this turbine.

i belive todd can make you one if he does not already offer one.

anyone have some links where i can get this mani...or perhaps someone sellin one?

the greddy kit uses an 18g, call em up and order a manifold, and maybe the down pipe

PM TurboToyotas

Or call Full Race: (866) Full Race.

The flanges are the same I believe, just a ported housing on the one you have. Turbo Toyotas has a manifold that will work with a Mistu flange. As well as Full Race (who took over the building of log manifolds for ZPI) still can make you a log manifold for this turbine.


Totally diff......... the specs are close but the flange is not even close.

i belive todd can make you one if he does not already offer one.


Yes I can.....you have a few options.

1- I can build you an EL/Ram horn style, thats divided..single or dual wg your choice

2- Same as above....non divided with single wg

3- A log....but not an option for divided.

This isn't a manifold thats a production pc.....just something I can build custom.

Up to you

But at least you have options. :)

Regards-

Todd

how about an adapter plate?...anyone know who can make one?