Does anyone have any infomation on these rims, because sadly I cannot find much not even the weight. They are insanely cheap at about 145-160 per rim and I'm trying to find out why before I make a big mistake.

http://www.dragwheels.com/product.asp?ID=59

http://www.elementwheels.com/prodimages/dr19chrome.jpg

http://www.elementwheels.com/prodimages/dr19blk.jpg

http://www.elementwheels.com/prodimages/dr19gm.jpg


http://www.elementwheels.com/prodimages/dr19silver.jpg

I plan on buying these on gold in a month or so. saw them on someones BSP tc and i thought it looked amazing, cant beat that price

Cheaper if you get them here:

http://www.discounttiredirect.com/direct/findWheelDetail.do?yr=2007&wd=18&c=0&pc=45381&rw=7.5&bp=5-100&vid=008806

I actually saw these only 17" on ebay for $300

Anyone have any pics of them on a tc or at least the weight of these beasts?

I like a lot of the Drag styles, unfortunately their offsets suck. :(
Discounttiredirect.com is the way to go! Plus, you'll get FREE SHIPPING!! :clap:

my guess is that these wheels would be pretty heavy. not too sure about the quality of this brand.

With a offset of 45+ on stock everything would these 18 inchers pose any problems for me?

those are nice

eh...idk about those...i have to see them on a tC.....

I could of sworn there was a bsp tc in a magazine photshoot with these wheels on in gold. if not then they were veerrry similar, thats where i first saw them.

What magazine?

drag wheels are cheap but good quality. those are prob gona be around 20-23 lbs

With a offset of 45+ on stock everything would these 18 inchers pose any problems for me?
No, you'll be fine. I would do some more searching though. Drag is a knock-off brand. You get what you pay for. Maybe you should save up and get some other wheels.

i think maybe tunerzine? dont quote me on that

UMMM....ok

I could of sworn there was a bsp tc in a magazine photshoot with these wheels on in gold. if not then they were veerrry similar, thats where i first saw them.
I believe you're thinking of nebster (http://www.scionlife.com/profile/nebster). And no, they are not Drags. His are much better.
That's not say Drags are bad. I have Flik Artics that ran me $100 ea and they are solid. (A tad bit heavy but that's ok.)
I get compliments all the time on my mesh Fliks.

^ I think you're right, they look similar... and gorgeous

I could of sworn there was a bsp tc in a magazine photshoot with these wheels on in gold. if not then they were veerrry similar, thats where i first saw them.
I believe you're thinking of nebster (http://www.scionlife.com/profile/nebster). And no, they are not Drags. His are much better.
That's not say Drags are bad. I have Flik Artics that ran me $100 ea and they are solid. (A tad bit heavy but that's ok.)
I get compliments all the time on my mesh Fliks.

omg i hope ben doesnt see this. he would flip if people compared his AutoArts to ...... ::gasps:: drags... :doh:

w...



t...



f...

Anyone got these on their tC? I'm thinking of buying them, but i'd like to see them on a tC first.

Here's what I'm talking about:
http://www.discounttire.com/dtcs/findWheelDetail.do?rcz=60559&rc=ILCINT&yr=2006&wd=17&c=1&dVeh=dVeh&pc=45372&rw=&bp=&vid=008806&tc=DRAD19

w...



t...



f...


:rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl:

ben its ok, at least you got custom drags :rofl:

Yea, idk why anyone would confuse these for the cheap ___ drags, you can tell nebster's rims have quality just from the pictures.

lets see

http://www.tunerzine.com/articles/235/images/tCbyRAban042.jpg

vs.

http://www.spec1wheels.com/wheels/wheels-brands/drag/DR-19/dr19gm.jpg

you people are crazy

yea cus they dont look alike :roll:

haha....saw neb coming a mile away...I thought about these b4 I got my axis.

Wow damn chill people, i saw the nebster photos once and from memory they look pretty similar especially when theyre both gold. I didn't mean any disrespect.

drag pwns nebster...

drag pwns nebster...

x2








wait

They look close enough for me at a glance not to tell the differance that I would feel in my pocket book....

you're dumb then.

This is why I :love: SL!!
People get all bent over the strangest things.
Thanks for making me laugh!!

I LOVE SL......

you're dumb then.

Retail a set of your rims goes for around $2520 and is it by no means dumb for me not to see the differance between those two rims compared to to the differance in price....

With a set of tires you are looking at $3250 at least which is roughy 1/5th of the base price of the car itself.

:no:

right but you're also looking at a 1 piece cast wheel vs. a 3 piece forged wheel, the rims look 100x better than the drags and you will see that if you buy the drags.

i'm not telling you at all to buy my wheels because they're not for everyone but you can't deny that they're not anything alike and not anything comparable.

its really a cost vs. quality issue. If you want something cheap, it wont be high quality. If you want something quality, it wont be cheap.

Forged wheel nut huggers like nebster and me love them for a reason. You get what you pay for. This applies to almost every modification out there.

So in this case, Drag is succeeding in marketing a wheel as a cheap alternative to the more expensive mesh wheels out there, but you won't be getting anywhere NEAR the reliability and quality of that of a forged wheels...

ooo POST THE PIC OF THE BROKEN WHEEL ALEX DO IT NOW

Nebster your rims look like the BBS rims I tried out in the Fall.........if the quality of them is the same as the BBS rims they're well worth the money..........

Wheels and tires have a function.............forged rims are worth the money and will last through most anything you put them through............track,shows,daily driving.........

Cast rims are really for basic driving........the Drag rims fit a budget and look fine.........will function fine........they are a bit on the heavy side.........and yes they look like the higher end style..........till you compare side by side.........

I wish I could of afforded the BBS rims,but I was unable to save that much and still eat...........LOL...........

Well I say get what you can afford..........if you have higher dreams then just be patient and save a little longer...........

I had to save for 6 months to get my rims today............

What rims did you go with BZinn

Wife got the konig Crosshairs.......they are in the ruby thread posted tonight by her......pretty decent rims............fit really well........but I really would love a set of forged BBS......mans gotta have dreams........

Next comes a CF Kami hood.

^ that should look hot with SCM

Okay you got me thinking

http://i198.photobucket.com/albums/aa297/NORTY01/28JAN2008032.jpg

what about it? thats what happens to cast wheels :)

http://i42.photobucket.com/albums/e350/nebster530/knock-offs.jpg

1st pic looks like a corvette rim,, so kudos to american engineering...2nd pic...well it looks like it's been in a accident, and that would happen to any rim.

i think the accident came because of the wheel :)

i just ordered a set of the drag rims and honestly it looks fine.. if it adds a little more weight.. that just means i gotta 1 either make my car a little fast or 2 lose some weight myself.. but honestly.. dont worry about them breaking.. if it breaks then im sure u can find it in ur heart to dish out another 150 for a new one.. i mean.. think about .. u crash with a set of 2-3 thousand dollar rims and ur ____ed when it comes to buying some new ones.. as far as i know.. insurance wont pay u for ur aftermarket ____.. plus like everyone else has been saying.. the drag rims really did up their looks and when u drive by ppl will still turn their heads

"Drag Wheels is driven by the pure passion of JDM. "(from the description on tire rack)

Too bad they are made in China :lalala:
:rofl:

:rofl: good point