Notices
Regional - Pacific Northwest
ID, OR, WA

The parts have arrived.........

Thread Tools
 
Search this Thread
 
Old Feb 26, 2008 | 10:13 PM
  #1  
BZinn1's Avatar
Thread Starter
Senior Member
10 Year Member
5 Year Member
Balliztik
SL Member
 
Joined: Jun 2007
Posts: 9,538
From: Washington
Default The parts have arrived.........

They have arrived........the Sub and NINe.5 have made their way here..........

I hate to say it though but the measurements they give on the site for the NINe.5 are not accurate..........the amp is much bigger than they show it to be.........it is HUGE...........my sub box is still a few weeks out though.........which is cool since I am at least a month away form the install of the amp........gotta build a rack in the floor and light it up and carpet it and everything else.............I may have a hard time hiding this thing........

Good news also the tires are here..........wheels arrive tomorrow via Fex Ex to the installer.........so at least I will have something to show at the Bond show.........
Old Feb 26, 2008 | 10:18 PM
  #2  
tCeeJay's Avatar
Senior Member
10 Year Member
5 Year Member
SL Member
 
Joined: Feb 2007
Posts: 453
From: Rain City
Default

Can't wait to see that monster. which sub did you end up going with?
Old Feb 26, 2008 | 10:31 PM
  #3  
MoScion's Avatar
Senior Member
10 Year Member
5 Year Member
SL Member
 
Joined: Jun 2006
Posts: 873
From: Newark, CA; Auburn, WA
Default

Congrats! Can’t wait to see the setup.

Make sure to keep the Amp well ventilated it can heat up quickly especially if it is in a tight spot.
Old Feb 26, 2008 | 11:01 PM
  #4  
BZinn1's Avatar
Thread Starter
Senior Member
10 Year Member
5 Year Member
Balliztik
SL Member
 
Joined: Jun 2007
Posts: 9,538
From: Washington
Default

I went withthe SQ10 in the box that fits in place of the stock box..........kinda let's say a training sub.......LOL..........as time goes on I will move up to a set of hand made fiber glass boxes fora set of 12's..........but for now it will do..........still trying to decide on going front and rear stage...........or rear seat 6.5 sub D4 coil ....and front comps.......I can power it all and I think the 6.5 subs in thge back seat would adda lot of sound........I have a lot of deadening material so it can be done and tuned fairly well........

Mo I wilneed your expertise on fans.......I know I willneed one to pull air in and one to get it out.........I willbring you my blueprints and see what you think I need to do to exhaust the heat...........when I am done the amp will be under plexi.........if I can get it to fit..........if not then I will have a shaped top caging it in place.............all wires will be channeled between the base and top and the entire thing will be able to lift up like stock floor and have access to spare tire...........
Old Feb 26, 2008 | 11:05 PM
  #5  
tCeeJay's Avatar
Senior Member
10 Year Member
5 Year Member
SL Member
 
Joined: Feb 2007
Posts: 453
From: Rain City
Default

be careful with that sub. many people love it but a lot of people have blown it as well.

Can't wait to hear your system when its all done. Should sound good.
Old Feb 26, 2008 | 11:10 PM
  #6  
BZinn1's Avatar
Thread Starter
Senior Member
10 Year Member
5 Year Member
Balliztik
SL Member
 
Joined: Jun 2007
Posts: 9,538
From: Washington
Default

I willneed help tuning the amp...........I downloaded the tones..........and know how to use a voltage tester.......and some what under stand the video I found online,but if anyone knows how to do it all first hand I would love the help...........

the SQ willhold 350w and I am running the amp to sub at 4Ohms so it wilonly give it 250w......so as long as I tune it right so no clipping I should have a healthy sound out of it.........

the NINe.5 can push 600+w at 1 Ohm...........which is what I may try to aim for withthe second sub setup..........
Old Feb 26, 2008 | 11:17 PM
  #7  
BZinn1's Avatar
Thread Starter
Senior Member
10 Year Member
5 Year Member
Balliztik
SL Member
 
Joined: Jun 2007
Posts: 9,538
From: Washington
Default



It is like 22lbs
Old Feb 26, 2008 | 11:21 PM
  #8  
Kanchi's Avatar
Senior Member
10 Year Member

5 Year Member

SL Member
iTrader: (4)
 
Joined: Sep 2006
Posts: 10,661
Default

wow....where the heck are you gonna out that?
Old Feb 26, 2008 | 11:24 PM
  #9  
BZinn1's Avatar
Thread Starter
Senior Member
10 Year Member
5 Year Member
Balliztik
SL Member
 
Joined: Jun 2007
Posts: 9,538
From: Washington
Default

she is gonna be tucked into the back floor..........it will fit........just gonna need to do a bit of massaging to get it in.........the crossovers will be in the floor as well and it will all be lit ............I took a lot of measurments.........and then made some more.........and drew up a blueprint........next I need to make a life size template..........with me anything is possible..........if I can see it I can do it...........
Old Feb 26, 2008 | 11:25 PM
  #10  
BZinn1's Avatar
Thread Starter
Senior Member
10 Year Member
5 Year Member
Balliztik
SL Member
 
Joined: Jun 2007
Posts: 9,538
From: Washington
Default

Or I will put it under the dash with everything else........
Old Feb 26, 2008 | 11:36 PM
  #11  
Kanchi's Avatar
Senior Member
10 Year Member

5 Year Member

SL Member
iTrader: (4)
 
Joined: Sep 2006
Posts: 10,661
Default

or on the roof
Old Feb 27, 2008 | 12:08 AM
  #12  
GQQSE13's Avatar
Senior Member
10 Year Member

5 Year Member
SL Member
 
Joined: Apr 2007
Posts: 5,942
From: Decatur, IL
Default

damn its the size of the zx2500 kicker
Old Feb 27, 2008 | 01:24 AM
  #13  
Importspeed's Avatar
Senior Member
10 Year Member
5 Year Member
Balliztik
SL Member
 
Joined: Mar 2006
Posts: 3,578
From: Olympia, WA
Default

that amp looks bigger them my little one LOL
Old Feb 27, 2008 | 02:31 AM
  #14  
BZinn1's Avatar
Thread Starter
Senior Member
10 Year Member
5 Year Member
Balliztik
SL Member
 
Joined: Jun 2007
Posts: 9,538
From: Washington
Default

Wheels have just left Seattle at 7:06 pm............I may play hookie tomorrow........heck I am at 23.5 hours at work this week and that is in two days........I need a day off.......LOL

Wheels are big too............hope they are really the correct weight as Konig said of 23 lbs..........
Old Feb 27, 2008 | 02:39 AM
  #15  
GQQSE13's Avatar
Senior Member
10 Year Member

5 Year Member
SL Member
 
Joined: Apr 2007
Posts: 5,942
From: Decatur, IL
Default

usually konig is always accurate with their info. so you should be good!
Old Feb 27, 2008 | 02:43 AM
  #16  
BZinn1's Avatar
Thread Starter
Senior Member
10 Year Member
5 Year Member
Balliztik
SL Member
 
Joined: Jun 2007
Posts: 9,538
From: Washington
Default

Will have pictures for you as soon as they are on Chris...........I hope they look as good in person as they do in my brain............
Old Feb 27, 2008 | 03:13 AM
  #17  
Importspeed's Avatar
Senior Member
10 Year Member
5 Year Member
Balliztik
SL Member
 
Joined: Mar 2006
Posts: 3,578
From: Olympia, WA
Default

dude brian come on man you need to smile more LOL in your pics LOL
Old Feb 27, 2008 | 03:29 AM
  #18  
lil_will's Avatar
Senior Member

10 Year Member
5 Year Member
ScionERA
SL Member
 
Joined: Apr 2005
Posts: 3,400
From: Back in AZ!!
Default

BZinn1... you have PM.
Old Feb 27, 2008 | 03:47 AM
  #19  
BZinn1's Avatar
Thread Starter
Senior Member
10 Year Member
5 Year Member
Balliztik
SL Member
 
Joined: Jun 2007
Posts: 9,538
From: Washington
Default

Thanks will I printed the info you sent.........this info was a lot of help......for the price I hate to blow up my sub...........this sub is my training sub........plus my wife is not into bass as she has ruptured ears.......but I like it......even though I listen to stuff like Metallica and Audioslave.........
Old Feb 27, 2008 | 03:48 AM
  #20  
BZinn1's Avatar
Thread Starter
Senior Member
10 Year Member
5 Year Member
Balliztik
SL Member
 
Joined: Jun 2007
Posts: 9,538
From: Washington
Default

Originally Posted by Importspeed
dude brian come on man you need to smile more LOL in your pics LOL
That is my smile.......



All times are GMT. The time now is 04:04 PM.