Until I can afford Anzos
Matte clear with black tint, then clearcoat (gloss) on top. Yes I did remove them. Lightly sanded with some 400 just to give the surface some tooth and washed the hell out of them. When the sun hits em then take on a dark ruby tone.
I washed em with hot water and dawn dish soap, let em air dry then a quick once over with acetone on a lint free cloth just to make sure the surface was really clean.
And thanks, I did the side markers on the mirrors the same way
And thanks, I did the side markers on the mirrors the same way
Originally Posted by Whispaz
looks nice. i just added a couple more coats on mine to get a little darker. i used VHT nightshades. just spray>clear>done (you could sand too but i didnt)
Originally Posted by DJ_FroZone
oy show the side markers! im tired of the yellow!!. Is their anyway to change the tails back to stock if needed to pass some sort of dealer inspection?
btw SIDE MARKKKKERS
btw SIDE MARKKKKERS
Here's a couple pics for you

the sides are a little darker than the tails so I lose about 50% of the original light, the tails lose about 20%. Still legal here in NV as the law specifies color for tails and sidemarkers, not lumens
O i thought u meant that yellow relector. on the head lights. i gotta bsp. so im going for an all blue look so i know im gettting blue overlays on the front and mirror turns. but that looks sick
Originally Posted by DJ_FroZone
O i thought u meant that yellow relector. on the head lights. i gotta bsp. so im going for an all blue look so i know im gettting blue overlays on the front and mirror turns. but that looks sick
Originally Posted by lvbitwiz
Originally Posted by DJ_FroZone
O i thought u meant that yellow relector. on the head lights. i gotta bsp. so im going for an all blue look so i know im gettting blue overlays on the front and mirror turns. but that looks sick





