Strup Exhaust installed
#1
Senior Member
Scikotics
SL Member
Thread Starter
Join Date: Apr 2008
Location: West Monroe, LA
Posts: 123
Strup Exhaust installed
Strup Header, heh it wasn't all that hard to get on, hardest part was the o2 sensors and breaking them loose... but i got lucky and did not strip em or anything at all.
Strup Exhaust. now this was a pita to get on, mostly because all i had was the stock jack and a pair of jack stands ... ate a lot of dirt getting it installed .. but its on there ... got to tweak it a bit more it is hitting the exhaust shield someplace ...
i was suprized at how quiet this setup is ... it seems to be as quiet as the stock setup ... which is good ... but it revs a lot quicker and seems a little more responsive on the highway ...
no CEL of course, put in one of those 90 deg CEL eliminators on the second o2 sensor.
#3
Senior Member
Scikotics
SL Member
Thread Starter
Join Date: Apr 2008
Location: West Monroe, LA
Posts: 123
i think that will depend mostly on the dealership ... they can't 'void' the warrenty because it is on there ... but if i have a problem with my o2 sensors ... ot the stock resonator .. then i would be responsible for paying for it of course ...
but any other type of failure, they will have to prove that the mods caused it before they can deny warrenty work ...
but any other type of failure, they will have to prove that the mods caused it before they can deny warrenty work ...
#6
Senior Member
Scikotics
SL Member
Thread Starter
Join Date: Apr 2008
Location: West Monroe, LA
Posts: 123
Originally Posted by Mosh_xB
damn i don't want quiet, but strup seems to be the best for xB2 exhaust so far.....ughhh
#8
Originally Posted by -Devil-
Originally Posted by Mosh_xB
damn i don't want quiet, but strup seems to be the best for xB2 exhaust so far.....ughhh
i just wanna bolt this ____ up, so i dont have to weld or take it to a muffler shop or something do i?
#9
Senior Member
Scikotics
SL Member
Thread Starter
Join Date: Apr 2008
Location: West Monroe, LA
Posts: 123
for the glasspack option you will have to get a muffler shop to do some welding ...
if you are just replacing the header and then the cat-back setup ... it is bolt in and go ...
just get the setup bolt it in, and when weapon-r releases their S pipe ... get it and put it in place of the center peice.
if you are just replacing the header and then the cat-back setup ... it is bolt in and go ...
just get the setup bolt it in, and when weapon-r releases their S pipe ... get it and put it in place of the center peice.
#12
Looks exactly like mine except for the fact that my header is burned titanium blue at the bends and the rest is copper colored already.
I also just installed my Fujita intake and that **** SCREAMS! Holy moly it's loud!
I also just installed my Fujita intake and that **** SCREAMS! Holy moly it's loud!
#19
Originally Posted by anthonyha
strup headers eliminate cats?
Thread
Thread Starter
Forum
Replies
Last Post
PTUNING
PPC: Engine / Drivetrain
3
12-11-2014 08:09 PM
PTUNING
Exclusive Sponsored Sales
0
12-06-2014 03:58 PM
TheRedBox
Scion xA/xB 1st-Gen Drivetrain & Power
31
12-02-2003 04:53 PM