lol

hahahaha

those w/ Rota Grids should have their own thread so they don't have to waste valuable server space. I'm sorry but I feel like Grids is cheating. Looks as if tCs are becoming the new soobis w/ their love for Rotas...

I went over to the suby forum looking for some decent wheels, and seriously they are all Rotas. Lots of SRT4 guys run them too.

Which to me is fine, I don't really care i'm no quality expensive wheel whore as long as they look good. But the offsets most of the suby guys run suck.

Anyway yea, x2 on alot of suby guys loving Rotas. But they are indeed sick looking though

those w/ Rota Grids should have their own thread so they don't have to waste valuable server space. I'm sorry but I feel like Grids is cheating. Looks as if tCs are becoming the new soobis w/ their love for Rotas...

x2
Perfectly said.

someone get real te37's with those specs post them and PWNED to the rota guys

oh you mean something like this?

http://i4.photobucket.com/albums/y128/widjajachandra/IMG_8531.jpg

hmm would 18x9.5 +38 TE-37's have that concave look?

no. for reference thats a 10.5 et+22 rear. front is a 8.5 et+15 i believe

oh you mean something like this?

[img]http://i4.photobucket.com/albums/y128/widjajachandra/IMG_8531.jpg[/img

correct! those look good on the beamer! now someone buy them for a tC and laugh at the rota guys. i'm sick of seeing the grids now

ben won't a + 15 hit my struts

wont hit struts but an ich of tire and wheel will stick out past the side of car.

+25 then would be flush right?

depends on the width of the wheel, but yeah it should be.

oh you mean something like this?

[img]http://i4.photobucket.com/albums/y128/widjajachandra/IMG_8531.jpg[/img

correct! those look good on the beamer! now someone buy them for a tC and laugh at the rota guys. i'm sick of seeing the grids now

its actually bimmer

beamer refers to the bikes.

ben won't a + 15 hit my struts

i was referring to that m3

i know, i was saying, a +15 will hit the struts yes?

theoretically a lower offset would hit the strut than a higher strut. you may run into issues with the fender though

http://i49.photobucket.com/albums/f286/vr_sex/IMGP0212.jpg

wow.. are those professors that you're hanging on the wall? or just rotas...

lol those are not even close to being professors

Ben, you're blind

the SSRs just look a lil too big for the car. Look at the rotors, they're baby sized now, lol.

x2

that looks like a Borbet Type T hanging on the wall.

that tC above with the SSR D5Rs desparately needs a lip kit.

that looks like a Borbet Type T hanging on the wall.

that tC above with the SSR D5Rs desparately needs a lip kit.

Right and right, My lip kit is on the way, and my other coils so I can lower it more.

Surprised no one noticed the cop car yet.

the SUV?

lol those are not even close to being professors

lol.. fml.. i guess i can legally be considered as partially blind.

here is a few pics of a buddy of mine... not the greatest pics but you get the idea.
Front: 19x8.5 offset 35
Rear: 19x9.5 offset 38
Lowered on Sprint Springs (3 inches)

http://i8.photobucket.com/albums/a35/Wcrisolo/flip.jpg

http://i8.photobucket.com/albums/a35/Wcrisolo/flip1.jpg

What wheels?

What wheels?


j2/JAZ/Monarch Mesh 410 Wheels

you need to even out the camber.

found these on clubscion

http://i449.photobucket.com/albums/qq216/Socal_Shara/IMG_0022-1.jpg
http://i449.photobucket.com/albums/qq216/Socal_Shara/IMG_0023.jpg

^ any more pics?

http://i49.photobucket.com/albums/f286/vr_sex/Picture001.jpg
http://i49.photobucket.com/albums/f286/vr_sex/Picture004-1.jpg
http://i49.photobucket.com/albums/f286/vr_sex/Picture006-1.jpg
http://i49.photobucket.com/albums/f286/vr_sex/Picture007.jpg
http://i49.photobucket.com/albums/f286/vr_sex/Picture002-1.jpg
http://i49.photobucket.com/albums/f286/vr_sex/Picture005-1.jpg
http://i49.photobucket.com/albums/f286/vr_sex/Picture003.jpg

stretch FTL

STFU.

Fallon, I think you have the most aggressive fitment

lower NAOW!

yes, needs more low!

someone pick these up!

http://www.memoryfab.com/wheels/used/a20080220141042/

:D, crap tires, but thats not important haha.

someone pick these up!

http://www.memoryfab.com/wheels/used/a20080220141042/

:D, crap tires, but thats not important haha.

Stop post whoring those wheels you're making me thinking about spending money I shouldn't spend lol

I can't believe those aren't sold yet...they've been for sale for the longest time, lol

maybe it will stay that way so once i get my car paid off and get me some coilovers i can pick them up :P

Stretch lookin good. Nice wheels

i know the tires are 255/35/18 all way around. But no more info, There's a teaser tread on clubscion

maybe its just me but the bronze color reminds me of work emotions?

yes, needs more low!

It will be lower! I only have h&r springs right now. Im waiting for my coilovers to come so I can go lower and put more camber in the front. Maybe I can go a 1/2" lower in the back. We also have to install my camber kit in the back.

yes, needs more low!

It will be lower! I only have h&r springs right now. Im waiting for my coilovers to come so I can go lower and put more camber in the front. Maybe I can go a 1/2" lower in the back. We also have to install my camber kit in the back.

Why do you need the camber kit in the back? Reason I ask is you can probably get -3degrees of camber pretty easily.

I know, I posted those wheels in two different threads lol. They are sexy and the offsets are real aggressive! Spend your money now! lol its worth it!

well right now i'm only on TRD's lol I would also have to spend even more money getting them to fit right..once I pay off the car I'll start wheel shopping and deciding what I want..

well right now i'm only on TRD's lol I would also have to spend even more money getting them to fit right..once I pay off the car I'll start wheel shopping and deciding what I want..

lol okay. I was just messin with ya. I am about to pay my car off too! I just can't help but buy new goodies and start new projects lmao.

oh yeah for sure dude haha. When you have like $5k sitting in the bank and all these good deals are out there its VERY tempting not to buy a new project..hell I almost bought myself an MR2 for a toy haha


gotta focus gotta focus :eyes:

haha yes focus! Toys will come!

yes, needs more low!

It will be lower! I only have h&r springs right now. Im waiting for my coilovers to come so I can go lower and put more camber in the front. Maybe I can go a 1/2" lower in the back. We also have to install my camber kit in the back.

Why do you need the camber kit in the back? Reason I ask is you can probably get -3degrees of camber pretty easily.

I know, I posted those wheels in two different threads lol. They are sexy and the offsets are real aggressive! Spend your money now! lol its worth it!

Im already at 2.5* of camber in the rear already. I wanted it to be able to adjust camber, I don't plan on keeping these wheels very long, so I want to be able to adjust camber with what wheels im using.

Holy ish. SO many effing grids. what have i done D: :nails: I need to buy a new set of wheels quick.

^^ See! Look what you started!!

you are the root cause.... you need to leave otherwise the problem will continue to occur

^ That's a lil harsh, just get some legit wheels to make up for the Grid travesty

im buying grids! woohoo! lol

just cuz they dont make RPF1's in 18x9.5 >:0

custom it, they make it in 5x114.3 for s2ks. with +62 offsets lolz

getting laid off from your job=no cash

what the? laid off again? how the hell did that happen?

haha, no im talking about the first job, but theyre cutting all my hours at this one. theyve got me down to 14 a week...B.S.

my time has come!! :D

omg so much win!!

^^
?

woohoo! lol
gonna be ballllllin.

damn, everyone is stepping their game up on me, I think its time for me to go wider...

18x12!??? with pulled fenders?!

lol i have pulled fenders, and they still stuck out.

It Seems like i gotta step up my game too. I'm expecting lots of new things before summer!

lol i have pulled fenders, and they still stuck out.
well a little poke is cool :D, just not mexiflush it lol :P

just got the pix

BlktC's new setup.
http://img.photobucket.com/albums/v633/Aroddalobster/Bens030.jpg
http://img.photobucket.com/albums/v633/Aroddalobster/Bens042.jpg
http://img.photobucket.com/albums/v633/Aroddalobster/Bens041.jpg

HOLYCRAPIZZLE...watching!

wait....is that? those look like TE-37's reflecting off his car...

^ those are most certainly not TE37's

wow, nice. can't wait to see what's in store.

Those look like his GT-P's in the reflection. But damn those are very aggressive, can't wait to see the real pics, I hate teasers!! :(

those are his gt-ps.
these aren't my wheels just to clear any confusion if there's any.
i'll edit it.

hmm whats the ETC on that set-up? I can't stand teasers :P

i can't either. thats why i love having all the full on shots in my hd lmao

i'm sure it'll be worth the wait though.

lol
thanks matt!!

alright guys, i think it'll be totally worth it! :D

good stuff man

looks hella dope Blktc!!! now PM me a face shot asap lmao and the reflection of the GTPs looks dope lol

DAYUM! Looks Sick!! I'm planning to do the same thing soon too! My current stance looks like that but sunk in maybe half an inch. need to get a better offset! AGGHH Gotta sell these grids Quick!

http://i141.photobucket.com/albums/r69/shinjitai1438/DSC_5430.jpg

ben: looks sick! thats how mine looks after the spacer. gonna take pix but i wanna wash car first :D..

also check your pm.. wanna show u a site if you didnt knwo about it already

Damn... I'm so jealous now. Must have patience... I'll have mine done hopefully before summer. be sure to stretch those tires! 215s!

stretchhhhh

damn, goin to RB tomorrow to see if I can go wider with my wheels...

ooo weee this is getting exciting...anticipating the revival.... :nails:

http://img.photobucket.com/albums/v633/Aroddalobster/Bens030.jpg
did you guys roll the fender with that pipe?

^^ not yet, that's just the breaker bar, but fender will definitely need to be rolled flat, if not pulled to make his setup work

WIN!

oooo, i like i like.

SICK!
i hate teasers...

Lol I like how everyone always answers questions for me. Haha but yeah I might be getting some 205/40's... Or maybe some 215's..

Wheel specs are 18x8.5 +20 and +25.

If you wanna guess, pm me please. Don't blurt it out.

Thanks again for the compliments everyone!!

Ben

That's fresh. More pics. Give us at least a shot of the spoke.

Can't wait to see full shots.

the spoke will give it away for sure!

lol, yea.
these rims dont really look like anything else.
any idiot could guess it first try.

you know what they are cory?
i wanna see :tap: teasers FTL

lol, i know everything on SL.
:P

psh, mr. knowitall >_>

Lol I like how everyone always answers questions for me. Haha but yeah I might be getting some 205/40's... Or maybe some 215's..

Wheel specs are 18x8.5 +20 and +25.

If you wanna guess, pm me please. Don't blurt it out.

Thanks again for the compliments everyone!!

Ben
i say 205/40/18

^^ that's what I said

lol.. im picking up some 215/40/18's sunday.. just to see if it fits.. if not, you'll be seeing me thread in the classifieds on some dunlop tires for $180.. brand new.

but you can just save the time and money and get it right the first time :D

I think 205 would be best. 215 on a 8.5 ain't gonna stretch enough for you to slam it in the rear.

This thread is the most bizzaro world fad thing I've ever seen or heard of and it can't be safe. Stretching skinnier tires onto wider rims with high offsets just to get an extreme tuck look???

Tire roll?? Popping a bead?? Rim damage?? You Scion boys are crazy?!?!? Leave this to the VW/Audi crowd.

This thread is the most bizzaro world fad thing I've ever seen or heard of and it can't be safe. Stretching skinnier tires onto wider rims with high offsets just to get an extreme tuck look???

Tire roll?? Popping a bead?? Rim damage?? You Scion boys are crazy?!?!? Leave this to the VW/Audi crowd.

low offset wheels, not high

tucking is passé for vw's. they moved on to poke (wheels so wide its hard to tuck them. rather let them "poke" out past the fender. best done with 10"+ wide wheels)

what makes VW/Audi cars so much more capable than our cars of doing stuff like stretching tires and tucking?

just because they've done it long before us? Our cars just barely came out and something new has been tried on our cars every day.

and x2 to what won had to say..

there's a big debate in the Evo and WRX community about low offset wheels and stretched tires. some argue that set up is worth the decrease in performance since it looks nice. others argue these cars are so performance engineered, that low offsets and stretching doesnt belong. this reminds me of the debate between truck owners: some say trucks should be modified for off-road driving, while others like them slammed for strictly street cruising.

unlike evo and sti owners, most vw guys favor looks over hard-core performance. my old VW buddy said it best back when the Neon SRT4 first came out, "I'd rather drive a slow-asss dub, than a fast-asss Neon"

also, VW's come with wider fenders than any other fwd sold in america. so they can be very aggressive with wheel fitment. hondas and mazdas are the opposite.

good thing are cars arent fast so theres really no argument.
:rofl:

there's a big debate in the Evo and WRX community about low offset wheels and stretched tires. some argue that set up is worth the decrease in performance since it looks nice. others argue these cars are so performance engineered, that low offsets and stretching doesnt belong. this reminds me of the debate between truck owners: some say trucks should be modified for off-road driving, while others like them slammed for strictly street cruising.

unlike evo and sti owners, most vw guys favor looks over hard-core performance. my old VW buddy said it best back when the Neon SRT4 first came out, "I'd rather drive a slow-asss dub, than a fast-asss Neon"

also, VW's come with wider fenders than any other fwd sold in america. so they can be very aggressive with wheel fitment. hondas and mazdas are the opposite.
yeah there seems to be alot of haters on nasioc for low offset wheels /hella flush look.. but then there are a small few who like it.. i dont get it XD. I deff like the subi's with them aggressive setups >:p

lol seriously..

in the end, i love the VIP "style" (im not gonna get into this again...) so, im going for it.. dumping my car with stretched tires and cruising slowly so that people have a chance to look at my car.. lmao

unlike all those people who bone out of meets n do ricer fly-by's n isht.. Hard to see a car when it's moving so damn fast. lmao

woops, off-topic. :)

lol

soooo how bout dem cheeseburgers.

f that.
how bout dem blackhawks!
:D haha

^Word!

mmmmm

http://farm4.static.flickr.com/3407/3554533030_bbef9334a8_b.jpg

^^ that red pin stripe on the lip kills it for me...what a waste of some sick VS-XX

=T

i know, but they still look great to me

I like Deep dish rims as much as the next turner and I love aggressive wheel stances like the back end of the BMW X5 but with proper fitting tires that look as good as they perform.

http://www.fantasycars.com/gallery/Cars/Porsche/2001%20Sportec%20996%20GT2%20SP650/996_gt2_sp650_2.jpg

http://www.dubdaily.com/wp-content/uploads/2008/05/hartge_bmwx5_3-copy.jpg

i actually like the pinstripe.
i think it makes em "pop" more.

all the cars on this page need more low imo

ya i wasnt sure why that guys rear was so high while his front is flush.

ya i wasnt sure why that guys rear was so high while his front is flush.

Designated carpool car???

niiice looking wheel fitments people

im planning to "poke" my wheels out a bit
theyre slightlu tucked right now almost flush
spacers here i come lol

ya i wasnt sure why that guys rear was so high while his front is flush.

Designated carpool car???


:rofl: i didnt think about that :rofl:

what happened with Ben's set-up!?!?!

You need to ask twice? lol I'll ask him when he's next online.

lol well it was relevant in both threads :P

plus these 2 threads should be up top on the Wheel section :D

i'm not too sure he got his tires mounted yet.

OH wrong Ben. LOL I was thinking Nebster Ben.

lol.. i'll be back.. im busy with work and school right now.. trying to get my credits and my money for the tires

I didnt drive on them, the 452s aren't good tires when its cold out, especially rain. I had goodyear F1 A/S before on my stock wheels and MB weapon's but the S-drives are quieter and a much better tire for the price, they tend to run a little wider then most tires, thats what im running on my s4 also in a 205/40/18 on a 9.5 and this is the stretch http://i49.photobucket.com/albums/f286/vr_sex/DSC00367-1.jpg

how did you find tires for an 18 in 205? i've been looking everywhere but it seems like 205's on 18's are illegal because of some safety hazard. let me know please. :D

hahah what happened to the 225s? :D

iuno.. dude.. my wheels won't fit.. :(

i need camber arms! anyone got any hook ups? i don't want to pay retail for some camber arms...

which reminds me........

Toyo Proxes 4 make 205/40/18 same with Nankang NS2. a bit pricey though

wtf?! you serious? dude.. i can't find anyyyyy...

Ebay. Search "205 40 18" and you'll find several Toyos, Nittos, and Nankangs.

This looks like a good deal locally. When i was looking for 215/40/18s I emailed the seller, who offerred me a better deal if I came to his store (not using Ebay) and paid cash.
http://cgi.ebay.com/ebaymotors/4-NEW-205-40-18-NANKANG-AS-1-R18-INCH-TIRES-205-40R18_W0QQcmdZViewItemQQ_trkparmsZ65Q3a12Q7c66Q3a2Q7c39Q3a1Q7c72Q3a1240Q7c240Q3a1318Q7c301Q3a0Q7c293Q3a1Q7c294Q3a50QQ_trksidZp3286Q2ec0Q2em14QQhashZitem2ea5e226c6QQitemZ200351557318QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

lol.. that's what i did, and i found some... lol

question! Anyone know how much MORE negative rear camber the "hotchkis rear camber kit" will give our cars, including the stock camber? And anyone slammed with the kit? i cant decide how wide i want to go in the rear. :/

well im able to get -3.4 in the rear with the stock parts.. :D (if that helps anything out idk)

-3.4 was what i got with my stock camber.

sounds good. Are you guys slammed? So if you can get -3.4 and the hotchkis says it can give you 0-3 degrees of - camber. Does that mean it can go to around -6?

yup... that's according to the stock height.

http://i78.photobucket.com/albums/j97/BlkTC/IMG_2499.jpg
http://i78.photobucket.com/albums/j97/BlkTC/IMG_2542.jpg
http://i78.photobucket.com/albums/j97/BlkTC/IMG_2537.jpg
http://i78.photobucket.com/albums/j97/BlkTC/IMG_2516.jpg
http://i78.photobucket.com/albums/j97/BlkTC/IMG_2507.jpg

bump

:silly:

You suck. You know that, right? SHOW US THE DAMN WHEELS ALREADY. "The need to be polished" my butt. :flame:

You little tease...lol

You suck. You know that, right? SHOW US THE DAMN WHEELS ALREADY. "The need to be polished" my butt. :flame:

werd.
because the first thing we're all gonna say is "those wheels need to be polished".

LMAO.. sorry... i gotta make the grand entry fkkin CRAZY!!! lol..

they have to be perfect before showing to the public.. :D

:yawn:

show us the wheels already!!!

lol.. not yet.. i need mooonnnnaaaayyyyyy

max camber in the rear? any camber kits?

no camber kit.. around -3* of camber from stock shims

-3 is more then enough dude. now show us the wheels

i'm going -6* once the camber kit comes in.. :D

or maybe -5.xx*

thats too much man. -3.5 max

-3.5 is not enough sorry :]

i bet you they wheels are black with a crome lip nothing special lol

personally, i wouldnt run more than -4

That's cause you don't have too haha. Your wheels are sunk in like crazy

yea but even if they werent, i wouldnt feel that safe DD'in on -4 camber.

not to mention how many sets of tires youd go through.

And you feel safe driving that low? I think they are just as equal.

its either being too low and not knowing if there is a bump your going to hit or having negative camber and not seeing a bump your going to hit.

Either way you Gotta pay to play :)

i dont feel comfortable driving with more then -3.5

i wish i had pics of the good years i had on my GT-Ps when i was running -4.4 camber in the back :shock:

they where BAAAAD not to mention the contact patch was tiny!

and what might the specs of your volk gt-p's be?

they were 18x7.5 et 38 nothing fancy, but i had spacers on them to make them 23 all around

What were the sizes of the tires on them? With a 7.5 width rim, then of course running -4.4 camber would have a small contact patch o_o

225/40 nothin special

lol, im getting 205's and less camber than you.. :D

BAAAAAAAAAAAAAALLN

i wanna run around -5 because i think it'll make the fitment of the wheels perfect.. maybe add another 5 mill spacer as well...

Props to you blktc for wanting to run such an aggresive set up, can't wait for pics

lol, im getting 205's and less camber than you.. :D

BAAAAAAAAAAAAAALLN

i wanna run around -5 because i think it'll make the fitment of the wheels perfect.. maybe add another 5 mill spacer as well...

sick i wanna see!

post up the actual pics foo!

lol.. if you buy my tires!! o snap..lets trade for the bumper... and i'll show you actualy pics.. with proper tires..

LOL i have absolutely NO use for 18" tires, i have a set of 17s and a set of 19s lol. now if they were 205/35/19 you might have a deal lol

fml... get some 18's dude.. it'll set the car off real nice.. :P hahaha

lol 19s do too :wink:

but you gotta have 3 sets of wheels.. 17" 18" and 19"

:D

no dubs?
:rofl:

but you gotta have 3 sets of wheels.. 17" 18" and 19"

:D

lol technically my buddy never paid me for my GT-Vs i used to have so i do... :P

17 stockers, 18 Volks, and 19 SSRs :P

tell your buddy to buy some brand new tires.. :D lmao

yea.... after he pays me for the wheels lol. its been 2 months

id go and repo those bishes when hes sleeping lol

damn 2 months.. better than some people i know.. still owes a buddy of mine $600 after a $1800 debt.

yea well im hopefully gettin my money today...

just saw this thread lol


http://www.ndnguyen.com/wp-content/uploads/2009/04/burbank_041809_120.jpg

http://farm4.static.flickr.com/3501/3464623052_a3256c91c5_b.jpg

http://i210.photobucket.com/albums/bb254/realistwarrior/P3281956.jpg

http://i210.photobucket.com/albums/bb254/realistwarrior/P3281964.jpg

my rear setup with 0* camber haha
http://i210.photobucket.com/albums/bb254/realistwarrior/TestFitET23.jpg

I friggin love camber! :D

:)

http://i210.photobucket.com/albums/bb254/realistwarrior/TestFitET23.jpg

I friggin love camber! :D

Stop using the widow maker jack

lol i thought the same when i saw that.

blktc- are you rear fenders rolled, looks like if they are they could go more then you should have no problem with the tires you are using

unless he got them done recently, no, his rear fenders are not rolled.

then he needs too! i rolled mine with the volks so i could run stock camber being slammed out, plus it makes the wheel sit flush better, a friend has the lakewood fender roller, makes it nice and clean

lol i just used my breaker bar and a heat gun.. haha

maybe i should invest in a fender roller...

lol did it come out as awesome as mine?

those super advans are godly

i didn't roll them yet matt... i was going to though.. lol..

Stop using the widow maker jack

I would use my regular jack, but sadly I can't get it to fit from the front, sides, OR back! LOL damn car is too low -_-

Stop using the widow maker jack

I would use my regular jack, but sadly I can't get it to fit from the front, sides, OR back! LOL damn car is too low -_-

I cant fit my jack under my box. I use the widow maker to jack up the car enough to get the jack under there. I never use the widow maker to actually hold the vehicle.

finally got around to lowering my car more, still not enough =(

http://i49.photobucket.com/albums/f286/vr_sex/fallonrollin.jpg
My rim looks like its missing a spoke in this picture
http://i49.photobucket.com/albums/f286/vr_sex/fallon001.jpg
http://i49.photobucket.com/albums/f286/vr_sex/fallon002.jpg

http://i158.photobucket.com/albums/t105/iiiyon/photo-2.jpg

Needs more dump in the front I know, looking into getting shorter springs for my coils.

so is there a reason why you have your hood like that? trying to cool down your engine or what? lol

Needs more dump in the front I know, looking into getting shorter springs for my coils.

where you gonna get shorter springs?

and what kinda coils?

so is there a reason why you have your hood like that? trying to cool down your engine or what? lol

they actually proved that it works but i say it still looks stupid

My hoods like that cause most of my friends into cars have 240s, more aesthetic than anything.

I have Tein-SS so hopefully I can get some shorter springs from Tein I just have to figure out the dimensions of my current spring to make sure it fits.

how much would it cost?

No idea. I haven't even looked into it yet, just a thought. If it's not worth it I may as well as get some new coils.

haha well when you find out let me know. i can tuck with my basics but i wanna go lower.

how much would it cost?

When I went to Tein headquarters in Downey to get stiffer springs for my SS-P's, I was quoted $120/pair. I'm guessing you'll be paying somewhere around there which really isn't that bad.

That's awesome! I'll have to get in touch with them too then.

more grids...

Eibach makes custom springs for other manufacturers coilovers.

^ naw, take it to valley muffler shop in west covina, they'll take care of you, just tell 'em you want the vms special =D lol

fml

i can't turn my wheel.. which is why i can't put my wheels on my car... but i had my wheels for 3 months now...

lol
"If you can´t turn your wheel, you´re doing it right"

btw Ben your sig says
buy my tires! (215/40/18)

lmao i know.. i can't change it on my computer.. anytime i click profile, it logs me out, and when i log back in, i'm not at my profile.

it happens when i click people's names too.. anyone know how to fix it?

oh yeah, the only way i can change my sig is if i use someone else's computer but there's only one in my household..(mine)

^^Clear your cookies

ooooooooo.. i'll try that..

or use firefox like a normal windows user lol

its the cookies, happened to me as well.

How much does eibach usually charge for that because I wanna be lower in the front as well

http://i141.photobucket.com/albums/r69/shinjitai1438/P7144189.jpg

i do use firefox... dunno what happened though.. lol

yay it works!

hmm shinjitai that MIGHT be considered aggressive :p

http://i141.photobucket.com/albums/r69/shinjitai1438/P7144189.jpg

NICE bbs's lol... i see what you doing there sir lol...

LOL i just realized i haven't posted in this thread myself. So here it is. Now its time to post in the expensive wheel thread :P

at last!! no more grids, hell-o BBS!!

lol, i guess i just got owned..

yez you did. you shall get
http://zilvia.net/f/wheels-tires/268456-4-work-meister-s1-2-17x10-52-2-17x8-5-20-a.html
and redrill em to fit on the tC.

at last!! no more grids, hell-o BBS!!

lol, i guess i just got owned..

you took too long :P

yez you did. you shall get
http://zilvia.net/f/wheels-tires/268456-4-work-meister-s1-2-17x10-52-2-17x8-5-20-a.html
and redrill em to fit on the tC.

A 17x10 -52 for the rear! I'd like to see pics of the car when they were on. IDK about the redrill on a wheel with the holes shown like Meister S1's though. If they were full face with a center cover I'd be on it. I need to get my funds up and get some more proper fitting wheels lol.

at last!! no more grids, hell-o BBS!!

lol, i guess i just got owned..

you took too long :P

im not rich mannngg!! lol annnd did everyone forget.. i just had the 240sx on my driveway put in the shop for a motor swap. It's my gf's car that i got for her and now im getting it fixed for her.

why couldnt you use those 215s? too big?

yeah.. lol but no one's buying them so im just going to run them.. :D

http://farm3.static.flickr.com/2589/3775948558_cd86889b62.jpg
http://farm4.static.flickr.com/3640/3775142919_dd020f2f42.jpg
http://farm4.static.flickr.com/3484/3775142849_1798b8652c.jpg

Possible things to come...? We'll see...

lol i still can't believe how perfect it turned out.
DO IT

i effing love it dude1

wow bro! that fitment looks sick! almost ready with mine. Just need to do some body painting and tires.

skyon: did u add spacers or some thing? looks a little bit more flush then your previous pix

wow thanks for letting your neighbor in on the secret... ___...

http://i78.photobucket.com/albums/j97/BlkTC/Picture015.jpg

haha its no secret, I had to move the rear wheels up front cus the front needed to be resealed, come to realize that the rears fit perfectly up front...so now I may need to do some rebuilding...we'll see if money allows

oh lol, and whatcha mean resealed? what happened? air was leaking?

also whats your camber up front? you got any?

yea the seal between the barrel and face started leaking air. I have -.5 degrees up front

http://i78.photobucket.com/albums/j97/BlkTC/Picture015.jpg

god freaking sick! :bow:

^^ nice tuck how much camber you running?

that time i was doing -8* or less.. maybe -10* it was nasty looking.. (in a bad way..)

nice...

BlkTC: OMG... that much negative camber? is that with the rear camber kit because i just received mine and am waiting till i finish my fenders before i install them. maybe i should install them first instead...looks sexy from the side though. the rears are a different story like you mentioned.

sky-on: Do they sell separate lips for works? i like where this is going.

BlkTC: OMG... that much negative camber? is that with the rear camber kit because i just received mine and am waiting till i finish my fenders before i install them. maybe i should install them first instead...looks sexy from the side though. the rears are a different story like you mentioned.

sky-on: Do they sell separate lips for works? i like where this is going.

lol yeah dude.. i got mine a while back from tig. that's with the nuts taken out and maxed out.. lmao

lol dude you are fking crazy!

haha thanks.. i'll take that as a compliment! lol :D

MORE TO COME!! not just eurolines... :P