Yellow, you make fat tires sexy. I love the car.
Jonny, lol get 205/40's! What offset are you?

So Hoddie do you like your women like your cars? WHITE. hahah

Yellow, you make fat tires sexy. I love the car.
Jonny, lol get 205/40's! What offset are you?

28 n meehhh need some rubber for boost too so i decided on the 215

Sent From My Mytouch 4G

So Hoddie do you like your women like your cars? WHITE. hahah

Hahaha you made a funny

And johnny, I gotcha, thats cool. Just make sure to add some camber!

requirements for hoodies women/car

preferably white.
must able to get low.
must be fast.

..and able to stretch rubbers

lolol

lookin good jasper! do the rpf1's have enough space on the back of the hub bore to run a 15mil spacer? the oem studs would stick out about 10mm's or so...

I would use bolt on.

..and able to stretch rubbers
hahahah

does this work?
xxr 16x8 0 offset on 195/45-16
rokkor coilovers
camber bolts in the front
stock camber adjusted in the rear
http://i1207.photobucket.com/albums/bb465/benny-tec/2011-02-15172701.jpg
http://i1207.photobucket.com/albums/bb465/benny-tec/2011-02-15172647.jpg
http://i1207.photobucket.com/albums/bb465/benny-tec/2011-03-05143715.jpg
http://i1207.photobucket.com/albums/bb465/benny-tec/2011-03-05143549.jpg
http://i1207.photobucket.com/albums/bb465/benny-tec/1297808907706.jpg
http://i1207.photobucket.com/albums/bb465/benny-tec/2011-02-15173120.jpg
http://i1207.photobucket.com/albums/bb465/benny-tec/2011-02-15173111.jpg
http://i1207.photobucket.com/albums/bb465/benny-tec/2011-02-15172739.jpg
http://i1207.photobucket.com/albums/bb465/benny-tec/2011-01-30135748.jpg
http://i1207.photobucket.com/albums/bb465/benny-tec/2010-12-28152144.jpg

Looks clean, but IMO 16's remind me of mexipoke. That's just cause everyone where I live has mexipoked cars. But it is clean.

I always loved the look of those xxrs, just wished that they made them in 17s or something larger.

you gotta be a lot lower then that to pull of 16s

^x2 the tread on top should not be visible

Ok pics finally
http://i166.photobucket.com/albums/u98/aj32953/190363_194890313865883_100000347471602_569929_7936851_n.jpg
http://i166.photobucket.com/albums/u98/aj32953/190090_194889757199272_100000347471602_569917_3149143_n.jpg
http://i166.photobucket.com/albums/u98/aj32953/189812_194890260532555_100000347471602_569927_2487132_n.jpg
http://i166.photobucket.com/albums/u98/aj32953/188357_194890207199227_100000347471602_569925_5754018_n.jpg
http://i166.photobucket.com/albums/u98/aj32953/183760_194890173865897_100000347471602_569924_2447956_n.jpg
http://i166.photobucket.com/albums/u98/aj32953/182998_194890283865886_100000347471602_569928_6524497_n.jpg
http://i166.photobucket.com/albums/u98/aj32953/183057_194889737199274_100000347471602_569916_4507804_n.jpg


If you're gonna run 16's it better be this low or lower.

http://a8.sphotos.ak.fbcdn.net/hphotos-ak-snc6/198499_10150452130800463_852210462_17965036_1496385_n.jpg

18x9.5 -1 with -4* camber... :D

http://a7.sphotos.ak.fbcdn.net/hphotos-ak-snc6/198453_10150452654745463_852210462_17970548_6103864_n.jpg

18x9.5 -1 -2* camber, camber will be adjusted more as soon as i have the car back

the rear looks so weird, the body line is almost completely gone, reminds me of a vw

pull the rear more!

its not gone. the angle of the pic is not showing it right. hold on ill post another angle

http://a6.sphotos.ak.fbcdn.net/hphotos-ak-ash4/196828_10150452108330463_852210462_17964768_2617741_n.jpg

looks like mine, just a lot cleaner =)

cuz i didnt use a plier to pull it.. hahahaha jk :D

thats probably the 3rd or 4th tc ive seen on 002's, and none of them have been able to pull them off. Youd def need to stagger and slam them things... the 8 wide at 0 pokes way too much in the front. love them wheels though, and they are crackhead cheap.

http://a8.sphotos.ak.fbcdn.net/hphotos-ak-snc6/199543_10150441003355463_852210462_17835561_8333705_n.jpg

low enough? lol

i still think you should pull the rear more, or add more camber, i hate when the tire goes past the fender.

mexiflush is the new hellaflush.
bro.

thats too bad, its just people that dont know how to get hellaflush and saying eff it i like this.... mexiflush you cant even get that low cus you put your tires right in harms way.... it doesnt even look cool. you're supposed to be tucking tire lol not putting the tire past the fender!


DUDE!!! i saw a BUICK RENDEZVOUS with rims on it that had HARDCORE mexiflush lmao, i wish i had my camera on me bro sht was crazy they straight poked out past all 4 fenders by EASILY 6 inches lmao if i see it again i'll take pics

mexiflush is the new hellaflush.
bro.

Good ____ing gosh welcome to new mexico. I hate it. Some people overdo it on the camber, but a lot here in town have never heard of it. It gets old seeing all these crap cars riding on 13's at like a -20 offset and saying they're "low." I get way lower with the HF setup.

Bro. Mexi-flush is the new thing. People wanna see how far they can push the boundaries, bro. It's like onicamber, bro. People wanna see how far they can go. Personally too much poke/camber looks bad to me. I'm even on the fence about any pole at all, bro. In my opinion, bro, rims flush with the fenders and a little camber in the rear is the perfect stance. Why people ugly-up a good thing is beyond me, bro. Just my opinion on the matter.




Bro.

I agree, But I personally like a leeeeeeetle bit more camber. There is a healthy balance between poke/camber; I.E. flushness and whatever it takes to achieve that.

Dude Jasper bro I understand. Bro I'm runnin -3.8 to -4 degrees of camber in the rear and that's almost pushing it. Any less camber tho and the tires will cone out past the fender. Seen as how I'm selling the car I don't want to pull the fenders

im already at -4* camber, its not done guys.. sheesh. you act like this is my first time around the block of flushness.. lol i was just test fitting the spacers and maxed out the camber arms in the rear. i havent messed with the fronts since i got my alignment so its still at -2*

^Did you get aftermarket camber bolts for the front or still with OEM bolts?

Bro. Brobrobrobro. Bahbro.

But really, I am interested to see the finished product.

Brooooooo!!!1one

http://farm6.static.flickr.com/5132/5560131149_045b06d29e_b.jpg

[]http://a8.sphotos.ak.fbcdn.net/hphotos-ak-snc6/199543_10150441003355463_852210462_17835561_8333705_n.jpg[/img]

low enough? lol

nope... lol my toe hook is actually flattened.. like actually parallel to the ground. haha

Mine are bent inwards.... But that's from a tow truck lol....

aftermarket camber bolts on the front but its not enough. i need to order my new coils so i can get camber plates and adjust it more

I have front camber plates on my coilover. Do you know how much negative camber it gives?

id say about -2 is what i get on my F&F v2t2

Thanks.^^

if thats all the camber i can get from any of the coils then im kinda screwed lol. i need more than -2 on my fronts

well if you can get -2 from the coils then you get 2 sets of camber bolts which alone will give you -2 each so with all 3 of them id guess you could get around -5-6 of camber up front which i dont think you'll ever need lol idk why you think you need more then -2 up front people runnin 18x10s dont have more then -2 for the most part i had -1 when i was running 18x9 +16

yeah I need about -3 on the front, but I can only get -2.

i just want to hide all the tire under the fender. i might do a little more fender pull once i have it home

http://a3.sphotos.ak.fbcdn.net/hphotos-ak-snc6/189785_10150456360175463_852210462_18007871_4143323_n.jpg

i love the front fitment! lol.. rear without spacer and cambered.. hella aggressive wheel looking not so aggressive anymore

i have front camber bolts for sale :wink:

Sooo..... hows everyone's axle's holding up? lol. I noticed my boots slightly leaking and I'm not as low as 09socal (for example). Tried to seal it up. So far so good. Hope it works for a good amount of time...

how much dave??

lmfao.. i just clicked on your FB link.. its me dude.. allen toma! hahahahaha

lmao

small world! lol

Yay I can finally post here.
http://farm6.static.flickr.com/5056/5563383810_3d532d52a8_z.jpg (http://www.flickr.com/photos/58555695@N05/5563383810/)
IMG_5484 (http://www.flickr.com/photos/58555695@N05/5563383810/) by Harrison Rakes (http://www.flickr.com/people/58555695@N05/), on Flickr
http://farm6.static.flickr.com/5051/5563420946_3d98a519a6_z.jpg (http://www.flickr.com/photos/58555695@N05/5563420946/)
IMG_5501 (http://www.flickr.com/photos/58555695@N05/5563420946/) by Harrison Rakes (http://www.flickr.com/people/58555695@N05/), on Flickr

http://a8.sphotos.ak.fbcdn.net/hphotos-ak-snc6/199543_10150441003355463_852210462_17835561_8333705_n.jpg

low enough? lol

haha you should see were mine is lol.

nice!

Thought i'd share a still picture of my car (finally). :) Not as aggressive as a couple people on the forums, but its okay! I'll post more pictures later within' the week! But for now, i hope this will do...enjoy.

http://i1136.photobucket.com/albums/n485/jonajaaayyy/YEEE.jpg

small world! lol

haha ya that was funny.

jona jaaayyy, that ish is candy !!

jona jaaayyy, looking hella good. may the Schwerts be with you :D

yea Jona, thats f'n classy!

that makes me want a rs2 kit haha. car looks sick, def one of my favs now.

Here's a couple pictures...

Widened fenders taken with my Crackberry. ;) Yee..

http://i1136.photobucket.com/albums/n485/jonajaaayyy/IMG00054-20110323-1221.jpg

http://i1136.photobucket.com/albums/n485/jonajaaayyy/IMG00053-20110323-1220.jpg

End Result...

http://i1136.photobucket.com/albums/n485/jonajaaayyy/193653_1947051797599_1281667108_32360553_5757883_o.jpg
Lippage. lol ;)


http://i1136.photobucket.com/albums/n485/jonajaaayyy/193520_1947023276886_1281667108_32360501_5774352_o.jpg
This shot looks like it can be shot in Hawaii..but its not! -___- lol I wish i was in Hawaii.. Plus it looks a little cartoony..but whatever..kinda cool i guess. Can't really complain much if the photoshoot is free, right? lol =P I still like the picture, nonetheless.

But anyway, thanks for the love guys! I really appreciate it! I'm ATTEMPTING to go towards the VIP route with this car, just because i admire the whole scene alot. No offense to those who are going towards the race scene. I guess its all just personal preference though, right? But as we all know, there will ALWAYS be haters. But think of it like this, if someone or if people are hating, then that means you're doing something RIGHT. lol ;) So yeeeeee, I'll post more when i get the other pictures from my friends/photographers!

u def got the start if ur goin vip... a suggestion, maybe a grill change?

u def got the start if ur goin vip... a suggestion, maybe a grill change?

Haha! Thanks bro! But I have yet to find a grill for which I like; I wish they had an upper grill that's like the lower grill of the 08' tc's. That would be so hard.. But anyway, I need a grill with a little more class than the regular mesh, know what i mean?

Any Suggestions!?...Anyone? =/

Maybe see if you can get an extra lower grill from someone and see if it can be modified to fit where the upper grill goes? I am not familiar with the lower 08 grill so I have no idea if it would work but it's a thought and could be an interesting project.

I have an 08+ lower grille I'll sell you for cheap, I bought it thinking I'd need it for my lip but I didn't.

I have an 08+ lower grille I'll sell you for cheap, I bought it thinking I'd need it for my lip but I didn't.

PM me! :)

Maybe see if you can get an extra lower grill from someone and see if it can be modified to fit where the upper grill goes? I am not familiar with the lower 08 grill so I have no idea if it would work but it's a thought and could be an interesting project.

And thanks XIEmperorIX (http://www.scionlife.com/forums/member.php?u=166886)! It sounds like it can work...Now i just hope it does! lol

I know their is a DIY for modifying an 05-07 lower grill to be a badgeless upper grill. Maybe take a look at that DIY and see if the 08+ grill is a similar enough design to where it could possibly work.

jona jaaayyy, looking hella good. may the Schwerts be with you :D

LMAO! "...May the Schwerts be with you :D" haha good one. My new signature. lol

Anyway, what part in SD do you live in? Do you bring your car out to any meets? Me, Spoony, Inkft, and Jaewrek always go to the meets together.. no homo lol

Looking good, Jay! And so is your car!!! <3

Can't wait to get my new wheels in a few months. </3

Looking good, Jay! And so is your car!!! <3

Can't wait to get my new wheels in a few months. </3

Good one, Steven..Right after me saying no homo, you pull some homo sh*t followed by a heart. But anyway, way to announce to the world about you and i. <3

Thanks though; what wheels did you decide on getting? Or did you even decide yet?

haha you should see were mine is lol.

But your on 16s so it's not fair to compare with someone who has 18's right?

I won't say on here, but it'll be ballin'!

lol. ahhh ____tttttt...

http://i1136.photobucket.com/albums/n485/jonajaaayyy/194421_163214123732619_137207749666590_308905_1479620_o.jpg

car is dirty but curious as what size spacer i should go for for the rear..? 17x9 et 17.. on RL's..i was thinking 10mm?

http://farm6.static.flickr.com/5022/5553813614_598786ce4a_b.jpg

15 or 20mm. Easily.

damn..you or your buddy still selling any..? haha should of bought those project kics when i had the chance..

^^^^what rear spoiler are you running?

Never been able to figure it out and no one else seems to know..I've never seen it on another tC..I'll take another pic for u if u want to see the whole thing but I think it maybe similar to an rsx

cool deal i just like how it looks so simple and clean im hating my pedastal spoiler right now but i dont to leave holes

I'll post a diff angle when i get home and maybe u can figure out what it is..

I'm thinking of doing the same thing moose; I wanna maybe run 15mm in the rear

Nice Jona, what are the specs on your rims/suspension?

I just spent like 3 months pay on wheels. Dear god.

Someone is eating Ramen for a while.

Someone is eating Ramen for a while.
I don't make much money so its not saying a whole hell of a lot but its wayyy more than i ever thought i would spend on wheels...

If you poured it all at once, it definitely leaves you feeling with some remorse.
I just use my CC.

Anyway, I'm sure they're sweet!

If you poured it all at once, it definitely leaves you feeling with some remorse.
I just use my CC.

Anyway, I'm sure they're sweet!

I did but I sold a bunch of stuff to make some money to go toward these, so its not ALL that bad. As far as CC's go, I dont think ill ever own one. Paid cash for these puppies.

No CC FTMFW

http://i50.photobucket.com/albums/f347/blueyedpimpp/Dirty%20Jersey%202/DSC_0556.jpg

http://i50.photobucket.com/albums/f347/blueyedpimpp/Dirty%20Jersey%202/DSC_0396.jpg

http://i50.photobucket.com/albums/f347/blueyedpimpp/Dirty%20Jersey%202/DSC_0402.jpg

Here's a couple pictures...

Widened fenders taken with my Crackberry. ;) Yee..

Was this a cut and weld? I've always been curious about how the bumper still mounts after they've been widened.

^x2 If it was done like the tC in Japan it should mount up just fine like factory, my concern would be the fitting of the fender liner, but being slammed I'd think some would run without it.

Hopefully ill be posting my baby's pics on here within a months time... in the mean time I just Installed some goods. Maybe you can tell from the Sig :biggrin:

Jona car is looking great!

Was this a cut and weld? I've always been curious about how the bumper still mounts after they've been widened.

Yes, they cut it and welded it afterwards. Now as far as mounting the bumper is concerned, i have yet to find out myself for i haven't had the time to dismount my front wheels yet. -___- lol But in due time, i'll find out! lol Here's a couple pics for ya..

http://i1136.photobucket.com/albums/n485/jonajaaayyy/IMG00044-20110322-1252.jpg

http://i1136.photobucket.com/albums/n485/jonajaaayyy/IMG00043-20110322-1248.jpg

http://i1136.photobucket.com/albums/n485/jonajaaayyy/IMG00054-20110323-1221.jpg

http://i1136.photobucket.com/albums/n485/jonajaaayyy/IMG00053-20110323-1220.jpg

And the end result...

http://i1136.photobucket.com/albums/n485/jonajaaayyy/193653_1947051797599_1281667108_32360553_5757883_o.jpg

http://i1136.photobucket.com/albums/n485/jonajaaayyy/194421_163214123732619_137207749666590_308905_1479620_o-1.jpg

http://i1136.photobucket.com/albums/n485/jonajaaayyy/YEEE.jpg

Jona car is looking great!

Thanks bro! :)

^x2 If it was done like the tC in Japan it should mount up just fine like factory, my concern would be the fitting of the fender liner, but being slammed I'd think some would run without it.

That one was done slightly different. They cut above the body line and pulled down then straightened the body line again.

http://i54.tinypic.com/20kvvv5.jpg

Yes, they cut it and welded it afterwards. Now as far as mounting the bumper is concerned, i have yet to find out myself for i haven't had the time to dismount my front wheels yet. -___- lol But in due time, i'll find out! lol Here's a couple pics for ya..


Oh ok thanks for the pics. I understand what they did now. The bumper mounting bracket stays where it's at.

effin sweet jona. best tc i've seen in a long while.

effin sweet jona. best tc i've seen in a long while.

Thanks, bro. :) It's still all in a working progress for my car still has a looong way. lol

Here's one for the road.. ;)

http://i1136.photobucket.com/albums/n485/jonajaaayyy/1232511100_sWi9i-X2.jpg


****EDIT****
Picture quality went bad when i uploaded for some reason.. =/ Any suggestions on being able to upload w/o sacrificing picture quality?

Like I said on WFC, Im gonna go ahead and vote Jona to be in the runnin for best stanced tc

Definately a very nice tC. But if were voting on nicest stanced tC, I have to vote for fliphm00b's tC or thekevin's tC.

Definately a very nice tC. But if were voting on nicest stanced tC, I have to vote for fliphm00b's tC or thekevin's tC.

what about Samneez's?
http://farm6.static.flickr.com/5299/5562865023_1492c619b3_b.jpg

http://farm6.static.flickr.com/5132/5572554249_4ce0e43f2d_b.jpg

I cannot wait for you guys to see these wheels! Teaser pics will be up tomorrow :p

*edit* I'm almost considering removing my window visors, because Jona's car made me realize how much cleaner is looks without them. I guess I'll have to try it and see....

^^LOL he just got some visors.

^^LOL he just got some visors.

Ironic, I think it would probably look better without them but thats just my opinion... I guess well see.

yea, Samneez's is sick as hell too!!!

Like I said on WFC, Im gonna go ahead and vote Jona to be in the runnin for best stanced tc


i wouldnt say best stanced, but id definitely vote for sickest wheels on a tc, i dont know what it is about those wheels, its just too sick!

^^^ Definitely sexiest wheels on a tC. Mark, Samsneez, Riboflavin, Jasper, Chico and a few others I can't think of have sick setups. I suddenly feel like i don't belong in this thread.

Don't forget fiendskillz, ihavenosn, shinjitai, the 8 other people with RS's :biggrin: , and these guys...


http://img859.imageshack.us/img859/6418/dsc00511z.jpg

http://img844.imageshack.us/img844/3389/item2c.jpg

http://img18.imageshack.us/img18/1121/50275939112a68e59529z.jpg

http://img826.imageshack.us/img826/9840/dsc0006ff.jpg

http://img843.imageshack.us/img843/6403/536257211878fa394675b.jpg

<3 Pic dumps.
good work sir.

Don't forget fiendskillz, ihavenosn, shinjitai, the 8 other people with RS's :biggrin: , and these guys...




Yeah, they were the names i couldn't think off. Haven't seen their cars in a min. Jon, you coming up to WFC in charlotte this weekend?

<3 Pic dumps.
good work sir.

I try my best to entertain. :) Here's some more for the hell of it.

http://farm5.static.flickr.com/4027/4441119935_787c7bc31d_o.jpg

http://img864.imageshack.us/img864/7686/dsc31002small.jpg

http://img191.imageshack.us/img191/6274/dsc00586bf.jpg

http://img269.imageshack.us/img269/4344/1003qg.jpg

http://img816.imageshack.us/img816/7998/picture015tr.jpg

http://img138.imageshack.us/img138/2421/4036256503a000d082eeo.jpg

http://img641.imageshack.us/img641/1859/mytcwithrs007.jpg

http://farm3.static.flickr.com/2644/4272952128_be6806fa9a_b.jpg

http://i293.photobucket.com/albums/mm44/D1G1T4L1978/tc_10-10-10/D1G1T4LScion-37.jpg

http://farm5.static.flickr.com/4127/5162558861_9aa662c9d1_b.jpg

Yeah, they were the names i couldn't think off. Haven't seen their cars in a min. Jon, you coming up to WFC in charlotte this weekend?

I wish I could but I have an Accounting exam on Saturday from 1-3. I know WTF right? :|

I wish I could but I have an Accounting exam on Saturday from 1-3. I know WTF right? :|

WTF? lol I guess I'll meet you at IA in atlanta in a few weeks.

WTF? lol I guess I'll meet you at IA in atlanta in a few weeks.

Yeah it sucks. But I'll be at IA for sure, with the wheels on hopefully. I would've been rolling stock this weekend had I been able to make it.

^ Thekevin's tC <3 <3 <3 <3 <3 <3

http://img843.imageshack.us/img843/6403/536257211878fa394675b.jpg


if you scroll past the image quickly, i would swear it was a new accord, lol

lol its the tailights! Cuz when i first glanced at it, of a civic cuz its short..and the tailights from the accord! lol

Here's a few i snapped just a while ago with my point n' shoot! lol Too damn broke to buy myself a cool camera. lol -____- haha enjoy!

http://i1136.photobucket.com/albums/n485/jonajaaayyy/IMG_6349.jpg
Thought the reflection from the sun was kinda cool..i guess.

http://i1136.photobucket.com/albums/n485/jonajaaayyy/IMG_6343.jpg

http://i1136.photobucket.com/albums/n485/jonajaaayyy/IMG_6342.jpg

http://i1136.photobucket.com/albums/n485/jonajaaayyy/IMG_6341.jpg
Muffler's dirty. -___-..

http://i1136.photobucket.com/albums/n485/jonajaaayyy/IMG_6338.jpg

It doesn't help that when i post pics on SL it turns out that much more worse! maaaannnn... -____- sucks.

I couldn't figure out what it was that made your tC so fascinating. But then I realized that your tC is the closest thing to VIP right now. It's very refreshing.

I don't think it's been asked yet, but what are your tire specs on those 10" wheels?

the VIP statement is exactly what i was going to say.
However it works, because those wheels are kind of VIP and sporty. Not just huge chrome deep dish like most other VIP wheels

nvm looks better w/ the visors... lol

^^^ Definitely sexiest wheels on a tC. Mark, Samsneez, Riboflavin, Jasper, Chico and a few others I can't think of have sick setups. I suddenly feel like i don't belong in this thread.

I just saw this. I don't know If my tC is up to par with those guys, but I love the compliment. Thanks :)

But then I realized that your tC is the closest thing to VIP right now. It's very refreshing.

Its not the only tC that is "VIP"ish out there. That white one on the Varianza F2S is "VIP"ish too. Done up just as well IMO

but jona's wayyy lower than him =\

I have to admit that Jona and the one with the varianzas make me almost miss my tC..lol ALMOST

Love it Jona..normally not a fan of so much neg camber but those wheels are amazing.

Its not the only tC that is "VIP"ish out there. That white one on the Varianza F2S is "VIP"ish too. Done up just as well IMO

Yes, it was posted a page back or so. It looks great, too. But Jona's drop is nuts.

Thanks so much guys! Although i might be low n' all, i don't have the luxury (anymore, that is) to able to drive with a peace of mind. I'm always worrying about dips/bumps/potholes...i even have to worry about hitting fruits on the street! I've hit a fruit before which popped my bottom grill outa place. Luckily, it didnt come off the car for it was just hanging under my bumper! -____- haha So there is a price to pay.. You know what they say though, It hurts to look good.

One i took in Downtown, here in San Diego. Point n' Shoot FTW!! :)

http://i1136.photobucket.com/albums/n485/jonajaaayyy/IMG_6353.jpg

whoring up this thread.
but in the best way possible.

v2 LAB BIG MEAT
Couple pics people took of my car
http://www.flickr.com/photos/61125488@N06/5567293376/in/photostream/

http://i166.photobucket.com/albums/u98/aj32953/v2hf0016.jpg

it's super chill when i go driving and then check my front right wheel and i'm missing a lug.

aj it would look so much better if you lost the Lexus emblem and got eyelids for the headlights. i have the same one and eyelids make such a huge difference. they are cheap too.

How the f did you get racelands to go so low?

^I think cuz he's on 16s too? But Aj it looks good from the side

^ yes it does. And I am liking those rims!

Looks good wanna b that low not far from it but gotta mod the rl for that

Sent From My Evo

it's super chill when i go driving and then check my front right wheel and i'm missing a lug.
It fell off, or did some one snatch it from you?

=( i wanted to go so bad to the v2lab meet

=( i wanted to go so bad to the v2lab meet

I want to go to a meet in general.

I think its the 16's that made such a drop on aj's, nothing else.

^x2, and also obviously running a stretched tire will get the job done.

thought I was going to join the thread this weekend, was going to pick up some ballin rims and get my stance corrected, but I went out to my car and a turkey cracked my windshield and scratched all over my hood. no joke. Ill continue to drool on this thread.

I say aj needs a hell of a lot of camber too

Mrhat, did you ____ off Sarah Palin?

it's super chill when i go driving and then check my front right wheel and i'm missing a lug.
Same thing happend to me a while back. I was lazy and didn't think much of it...then another one fell off. AAA was being retarded and said they couldn't toe my car because it was too low........Tried making it back with only 3...two more fell off at the same time, my wheel almost fell completely off going going 50.

it's super chill when i go driving and then check my front right wheel and i'm missing a lug.

its also super chill when one of the missing lugs happens to be a project kics r40 and they dont sell replacement lugs individually...FML

^Even with removing the bumper they still wouldn't tow your car?

http://i1188.photobucket.com/albums/z408/simpleclothingstore/side.jpg

18x9 et18 front

it's super chill when i go driving and then check my front right wheel and i'm missing a lug.

This happened to my front right, on stockies though. I was half way on a 300 mile road trip, ended up losing one more lug but made it home.

yeah i honestly am sort of unsure how it happened as all my lugs are torqued down as they should be. oh well, hopefully someone sells replacements, definitely not trying to buy an entire new set for one damn lug. annoyance.

http://farm6.static.flickr.com/5024/5580249157_7bece953f9_z.jpg

http://farm6.static.flickr.com/5291/5580834488_57a731978e_z.jpg

LOoking clean J Ash I guess you were in the group buy from dezod. Wish I had the extra coin to get a set. Did you sell your other wheels already? Oh well have to settle for the new XXR.

v2 LAB BIG MEAT
Couple pics people took of my car
http://www.flickr.com/photos/61125488@N06/5567293376/in/photostream/

http://i166.photobucket.com/albums/u98/aj32953/v2hf0016.jpg


sAW your ride at the meet bro. It's crazy that you drive like that daily but looked clean.

Jasper, looks amazing bro!

Damn J-ash looks dope! Are u gonna get spacers to poke out the rear more?

Thanks guys! I'm going to run 15mm spacers in the rear. I'm going to try to get the car at least a half inch lower.

Gunnist, I sold my old RPF1s a while back to fund these.

Yo Jasper! Lookin good man, lookin' good! :)

Thanks guys! I'm going to run 15mm spacers in the rear. I'm going to try to get the car at least a half inch lower.

Gunnist, I sold my old RPF1s a while back to fund these.


Im thinking of doin 15mm spacers also

Went jus a tad bit lower (limited due to coils which I plan on swappin)

http://i581.photobucket.com/albums/ss254/spdrcrtc/flatwhiteturbosciontcenkierpf116.jpg
http://i581.photobucket.com/albums/ss254/spdrcrtc/flatwhiteturbosciontcenkierpf117.jpg

I love your car

sam, did a lug fall off? or did a stud break?

and heres a couple crappy pics.
http://img.photobucket.com/albums/v236/jeremy7117/IMG_0576.jpg
http://img.photobucket.com/albums/v236/jeremy7117/IMG_0574.jpg

^ Like I said, you're making me want to put my coilovers to the test and lower them more.

man jeremydoc, i am lovin that SoCal weather :P

Jasper, just do it man haha you wont regret how itll look

thanks homie. and jasper, i removed the locking rings as soon as it came in the mail. haha. your drop looks pretty sweet right now, but any lower would look even better. mmmhmmm

Yep. I just gotta see what they can do. With one thread showing I can probably get it at least a 1/4 inch lower lol

Stock fendered fittmenttt

http://i249.photobucket.com/albums/gg206/dtlasky/84559fe5.jpg

http://i249.photobucket.com/albums/gg206/dtlasky/4d1063ef.jpg

dan, what size are those tires? the second pic looks like the sidewall is HUUUUGE

dan, what size are those tires? the second pic looks like the sidewall is HUUUUGE

The only part of the sidewall you can see in that pic is the bead lol it's a 215/40

^Damn, you can read the barcode off that. Stop with the teaser pics, full shots, promptly. Please. lol

One for the road!..actually two.

http://i1136.photobucket.com/albums/n485/jonajaaayyy/192084_200515536645654_100000616266555_599848_5328190_o.jpg

http://i1136.photobucket.com/albums/n485/jonajaaayyy/IMG_6335.jpg

Super clean...

^ Time to fap? Looks f*cking good, jay.

For people running stretches greater than mine - 225/40 on 9.5" (which is everyone), how damaged do your wheels get when daily driving? I want to go 215/40 for clearance but I don't want to beat up my wheels. Even now I have some dings and scratches on the lip from contact with road debris or whatever.

If you had a higher width and lower offset, the camber would help against that. Of course, the inside of the wheel would get the hits.

I'm running 215/40/18 on a 18x9.5 +38 wit like -3 camber in the rear, and the only thing is I got ding and sctarcthes on my lip like u stated Which are kind of avoidable from happening since our tires aren't really protecting the rim

Super clean...

Thanks, man! Appreciate it! :)

^ Time to fap? Looks f*cking good, jay.

LMAO! By all means, bro! (no homo) :) haha! J/k But thanks, man. :)

Alright son! Got the pics from my most recent shoot! Here's a couple! Hope you guys like it! Photo Credits to Kevin Ha! Lemme know if you guys need a photographer! And i like to whore my car out. Thanks.

http://i1136.photobucket.com/albums/n485/jonajaaayyy/_DSC0017.jpg

http://i1136.photobucket.com/albums/n485/jonajaaayyy/_DSC0015.jpg

http://i1136.photobucket.com/albums/n485/jonajaaayyy/192084_200515536645654_100000616266555_599848_5328190_o.jpg

http://i1136.photobucket.com/albums/n485/jonajaaayyy/_DSC0053.jpg

http://i1136.photobucket.com/albums/n485/jonajaaayyy/_DSC0025_1.jpg
And that my friends is the MINI Bic lighters; not the regular size! LMAO! ;)

Tell me what you guys think!! And why do my pictures turn out so blurry!?!? On facebook, its super clear! WTF!

I think I'd have that front lip destroyed in seconds, and that's just trying to get out the driveway! lol

looks amazing jona!! i would ____ that lip up within hours of it being on my car. lol

LOW N' SLOW GENTLEMEN! :)
Gotta be gentle with the car. ;)
LOL!

With road construction being done around town here and there and bad roads, it's more like slow, stop, turn around and find another way.

LOL! Oh trust, i'm guilty for doing exactly that several times before! lol That's why i had to reroute all the places that i go to now! lol

LOW N' SLOW GENTLEMEN! :)
Gotta be gentle with the car. ;)
LOL!

haha i drive pretty damn slow, but still! bay area roads just are not slammed friendly! and not to mention, San Jose, CA has the nations WORST roads.
http://abclocal.go.com/kgo/story?section=news/local/south_bay&id=7682756

daaaanngg... :(

sam, did a lug fall off? or did a stud break?


a lug fell off. weird, right?

Look what I found in my garage. Im not sure what they are but the look aggressive...

http://i249.photobucket.com/albums/gg206/dtlasky/ac5b61ec.jpg

I'm guessing ccw's or bbs

what are they? due tell

The car probably won't be shot until my StanceWorks shoot at SoWo, so unless someone gets all ninja and snaps some pics of it at a show before then. Its all gonna be a myysssteerryyyy muahaha lol

One more just to be a dick....

http://i249.photobucket.com/albums/gg206/dtlasky/4cc747c3.jpg

The car is flithy, hasnt seen wax in months, needs fenderwork (riding 4x4 status right now), and theres a bunch of little stuff I have to do before I really want anyone to see it, its kinda ____ing me off actually all the damn little things i have to do...

^ Time to fap? Looks f*cking good, jay.

For people running stretches greater than mine - 225/40 on 9.5" (which is everyone), how damaged do your wheels get when daily driving? I want to go 215/40 for clearance but I don't want to beat up my wheels. Even now I have some dings and scratches on the lip from contact with road debris or whatever.

my 912's are just a tad more stretched then yours, and after an entire year of DD 70%hwy, its not as bad as i would have thought, there are a handful of tiny chips here and there, but i really think its due to the SBC finish, its a very hard finish, therefore chips off from impact, rather then absorbing the damage, although i dont think its really due to stretched tires, since alot of the chips arent even on the lip edges themselves.

Jona Jayy how much did they charge to widen your front fenders? Looks like your not rubbing at all in the front. I am...

Look what I found in my garage. Im not sure what they are but the look aggressive...



dayummmm

Jona Jayy how much did they charge to widen your front fenders? Looks like your not rubbing at all in the front. I am...

I do rub just a tad bit when i turn, but other than that everything is fine..before i had the car widened though, omg, i was always buckling my fenders and whatnot..but after the bodywork, sht is a miracle! lol i can make u-turns again! haha Anyway...
To be completely honest, i don't know the exact price to just widen out the fenders because when i got my work done there, i pretty much did the whole shabang; Widened out the front fenders, and spray the bumper, full lip, fenders plus full blend. With all that, i paid a total of $1500 which, IMO, is not that bad... I don't know if i answered your question for i simply didn't want to give you false information...Hope i helped bro even though i feel like i didnt.. =/

http://www.canibeat.com/wp-content/uploads/2011/04/DSC_8479-600x399.jpg
LOL
http://www.canibeat.com/wp-content/uploads/2011/04/DSC_8443.jpg
http://www.canibeat.com/wp-content/uploads/2011/04/DSC_8476.jpg

That last shot looks awesome!

The car probably won't be shot until my StanceWorks shoot at SoWo, so unless someone gets all ninja and snaps some pics of it at a show before then. Its all gonna be a myysssteerryyyy muahaha lol

One more just to be a dick....

http://i249.photobucket.com/albums/gg206/dtlasky/4cc747c3.jpg

The car is flithy, hasnt seen wax in months, needs fenderwork (riding 4x4 status right now), and theres a bunch of little stuff I have to do before I really want anyone to see it, its kinda ____ing me off actually all the damn little things i have to do...


Where did you get the mud guards?

Congrats, Socal! I kind of like how it looks from the side with only the RS1 sides.

looks weird w/o front and rear lips, haha

Where did you get the mud guards?

Ebay sells them

http://shop.ebay.com/i.html?_nkw=scion+tC+mudguards&_sacat=0&_odkw=scion+tC+mug+guards&_osacat=0&_trksid=p3286.c0.m270.l1313

Stock fendered fittmenttt

http://i249.photobucket.com/albums/gg206/dtlasky/84559fe5.jpg

http://i249.photobucket.com/albums/gg206/dtlasky/4d1063ef.jpg

Look what I found in my garage. Im not sure what they are but the look aggressive...

http://i249.photobucket.com/albums/gg206/dtlasky/ac5b61ec.jpg

The car probably won't be shot until my StanceWorks shoot at SoWo, so unless someone gets all ninja and snaps some pics of it at a show before then. Its all gonna be a myysssteerryyyy muahaha lol

One more just to be a dick....

http://i249.photobucket.com/albums/gg206/dtlasky/4cc747c3.jpg

The car is flithy, hasnt seen wax in months, needs fenderwork (riding 4x4 status right now), and theres a bunch of little stuff I have to do before I really want anyone to see it, its kinda ____ing me off actually all the damn little things i have to do...


215/40 all around?
What are the specs of the wheels? Are you rubbing any with this setup? Any modifications to your fenders?

http://a5.sphotos.ak.fbcdn.net/hphotos-ak-snc6/196586_10150495428690463_852210462_18120196_5557839_n.jpg

^Nice Allen

i officially hate my coilovers though.. too much wheel travel.. i need new ones asap! =\

^ Get Stance coils

Where did you get the mud guards?

Mine came on the car from the dealer, I dont know if they were an option or something but my dad drove the car before me and they were always on there. I know he didnt put them on himself...

215/40 all around?
What are the specs of the wheels? Are you rubbing any with this setup? Any modifications to your fenders?

215/40's all around. I didn't really want to give out wheel specs but I guess I will....

Front: 18x9 ET10 (3 inch lips)
Rear:18x10 ET10 (4 inch lips)

215/40/18 512's On all four courners.

I rub like a b*tch. My front and rears are shaved but are probably going to have a slight pull within the next month as I am not driving to Georgia for SoWo rubbing tire like crazy, and I refuse to raise the car permanently...

and I refuse to raise the car permanently...

I applaud you.

Thank you dqlostsolz <3

09socal, i miss your white rimsss son. your ride still looks baller though!

Talked to this dude at Import Reactor few weeks ago. Turns out he lived near my friends, so I asked if I could do a quick shoot before my vaca was over.. Here's a pic

http://i51.photobucket.com/albums/f371/b180sx/2011/lowweezyana-05.jpg

$5 says DPT has Some SSR Prof's :O

I wish my meisters were 9 wide in the front :/. Came across this on a local forum ^_^

http://farm6.static.flickr.com/5102/5590694351_b57de317fd_b.jpg

gangster nonetheless, bro. :)

Dam Flip always lookin good, did u take off ur wink mirror? Also what are the specs on that tc riding on them rpf1 u did a photoshoot for?

^thanks! The specs are 18x9.5 +38 all around. They are the sbc rpf1s.. Took down the wink mirror because I wasn't feelin it anymore haha

$5 says DPT has Some SSR Prof's :O

Hell no foo.
i say BBS or CCDubs.

I wish my meisters were 9 wide in the front :/. Came across this on a local forum ^_^

http://farm6.static.flickr.com/5102/5590694351_b57de317fd_b.jpg

Dammmm.... When i grow up, i wanna be just like you! <3

^damn u making it sound like I'm old lol.

Hell no foo.
i say BBS or CCDubs.
Hope not :/ BBS RS=Played. IMHO.

I can assure you that they are NOT SSR's...

I'm pretty confident I'm right :)

whore this one out tehe

http://img.photobucket.com/albums/v236/jeremy7117/5588773545_98c2e5e381_b.jpg

^^ i like the damage to it, it looks driven =)


my fail video editing, threw it together in 10 minutes, not that i could have done any better with more time.

http://www.youtube.com/watch?v=_CgwYnwWCms

LOL that exhaust is redonkulous. Nice to see your wHip on film. Can you turn more than you were in the video?

that exhaust is absurd lol

edit: Flip, do you know what kind of grill that is on that silver tC?

It's the grille from the RS3 tC.

that exhaust is absurd lol

edit: Flip, do you know what kind of grill that is on that silver tC?

lol the tC is his.

LOL that exhaust is redonkulous. Nice to see your wHip on film. Can you turn more than you were in the video?

yeah i can make full lock turns with minimal rubbing, my front fenders are messed up enough to accommodate for it =D

Lol they don't look all that bad. I need to put in some more work. I still can't turn for sh*t.

I can assure you that they are NOT SSR's...

...more like oz's?

...futura's?

I'd like to see that.

lol the tC is his.

Lol, i was going to say the same thing when i saw that haha.

I had a dream last night that i found a pair of meisters for $300. lolz

Nice boso/victory pipe. Should've made it angle upwards alot more. Check out this guy's boso pipes. lol.

http://img223.imageshack.us/img223/708/1687728804621130100400pen0.jpg

...more like oz's?

...futura's?

I'd like to see that.

They were going to be, until I decided I didnt want to have to buy new lips and barrels to get them to the desired width/offsets. I decided that if I was gonna spend alot on a set of wheels that I was not going to run either a spacer or an adaptor to get them to fit right....

Nice boso/victory pipe. Should've made it angle upwards alot more. Check out this guy's boso pipes. lol.

http://img223.imageshack.us/img223/708/1687728804621130100400pen0.jpg

The DEFINITION of JDM-tyte

I ran across pics of this silvia and felt that I had to post them.

http://img6.imageshack.us/img6/8345/s15719092.jpg

http://img198.imageshack.us/img198/4949/375317090515c874fa5ebv.jpg

man I love te37's... imma jus have to break down and get me a set

te37 <3
How come those te37s have big lips? I'm guessing its at a super low offset.

They were going to be, until I decided I didnt want to have to buy new lips and barrels to get them to the desired width/offsets. I decided that if I was gonna spend alot on a set of wheels that I was not going to run either a spacer or an adaptor to get them to fit right....

I understand. I hope they fit perfect for you. Doesn't matter what the centers look like...lips are baller. I already like em.

te37 <3
How come those te37s have big lips? I'm guessing its at a super low offset.

prolly... like a 10+12 or something. Wish I could fit that size on ma tc!

offsets are probably negative.

i dnt see the point in stancing a car like that with massive power mods or on a car that you really want to drive

te37 <3
How come those te37s have big lips? I'm guessing its at a super low offset.

Also its probably a super stretched tire.

i dnt see the point in stancing a car like that with massive power mods or on a car that you really want to drive

you can still drive it...

offsets are probably negative.

specs are
19x9.5 +12
19x10.5 +12

you can still drive it...



specs are
19x9.5 +12
19x10.5 +12

thanks.

http://i141.photobucket.com/albums/r77/dorkoe/205814_215637311786879_100000218346727_989675_7741141_n.jpg


http://i141.photobucket.com/albums/r77/dorkoe/199621_215637758453501_100000218346727_989693_5096407_n.jpg

18x8.5 205/35/18 FRONT +32 OFFSET WITH 10mm Spacers
18X9.5 215/40/18 REAR +32 OFFSET WITH 10mm Spacers

http://farm6.static.flickr.com/5061/5599568426_85b62e16ba.jpg (http://www.flickr.com/photos/56647028@N06/5599568426/)

http://farm6.static.flickr.com/5184/5598984399_d7eae0dab1.jpg (http://www.flickr.com/photos/56647028@N06/5598984399/)

http://farm6.static.flickr.com/5305/5598981865_250c9e4b58.jpg (http://www.flickr.com/photos/56647028@N06/5598981865/)

Quick crap iPhone pics.
15mm spacers coming for the rears.

thanks.

:wink:

im sure someone could fit those on a tC, if not 19's at least 18's

dudes black tC

Side pics please.

^x2 & FF Monster I like your rims just cause I have the same ones but in Flat matte black, thinking of spray painting the center caps to throw them on

Yee! Photo taken by mr. Jaewrek himself. :)

http://i1136.photobucket.com/albums/n485/jonajaaayyy/194536_1972420915309_1386607270_2324742_4001207_o.jpg