Well I hope so. Chit I have 19x8.5 et 27 and they still aint low enough!

ill be at 19x8.5 +22 soon

Good..hurry up already..lol

everything was ordered and being shipped as we type!! hoping it comes in by friday so i can install saturday!

Looking forward to the pics!

me2 lol

Since this is the aggressive stance threads anyone out there running different size rims thats still aggressive. I brought 2 rims already thats 18x9s but after seeing this:
http://www.scionlife.com/forums/showthread.php?t=128917&page=432 ,
I may go for something similar (if they are different size rims) or just go the 18x9 all-around look that I originally planned.

A example of this would be like:

18x8 fronts, 19x8 rears
or like what I'm thinking of doingVVVV
18x9 fronts 35 off., 19x9.5 rears 35 off.

Pics and opinions would be nice...

i would stick with the same circumference on a tc personally.

would their be any issues with different sizes setup, after reading many threads im prepared to roll fenders, change camber, or etc. for my original setup.

youd prob have to roll the front and def. roll the back.
but that depends on your suspension to.

well I know imma go with some coils, I all goes well via tax return imma hop on that F&F group buy if they still have it up. if not some ricelands, I figure that it would be different to do 18 f 19 r, since I seen some acura TL's run hot wheels setups.

don't do it... just stay with the same size all around..

bump

http://i78.photobucket.com/albums/j97/BlkTC/january%2013%20photoshoot/DSC_0909.jpg
http://i78.photobucket.com/albums/j97/BlkTC/january%2013%20photoshoot/DSC_0833.jpg
http://i78.photobucket.com/albums/j97/BlkTC/january%2013%20photoshoot/DSC_0828.jpg
http://i78.photobucket.com/albums/j97/BlkTC/january%2013%20photoshoot/DSC_0823.jpg

ugh that last pic is too sick so get that ____ out of here!

damn...

^^ rite! thats what im saying. its just wrong now. that last pic is too much...lol i luv it

hahahaha thx

Get that weak fitment out of here! lol

____ looks ____ing sickk lol

you're welcome, ben lol. now post the trash can pic
oh and i did a photoshoot w/ a friend yesterday at the parking lot on gale i told you about. security guard's cool, he let me and my friend stay as long as it was only us, and this was at like midnight. lawts of open space.

thx guys haha, and it's only weak in the front... kinda.. lol

matt: i think i might just check it out today..

So instead of splurging on wheels, I'm going a little cheaper and then splurging on suspension.
But anyways I was looking at some 17x7 +47 Work CR's..not the CR-kai's.
I plan on B&G coil overs and slamming, but what size spacers would you guys recommend?

+47 is super high... your gona hate that offset

Correct me if I'm wrong, but isn't that what the spacer is for correcting?

yes but running spacers is not ideal... just a bandaid

Of course.
What's so non-ideal about it?

added stress on studs, you could have also improperly balanced wheel set up adding to poor driving... anything above 10mm u should already be looking into extended studs since your loosing thread length also... ive seen plenty of my share of mis haps

Okay.
Understandable.
What size spacers would you recommend running with?

5mm at most.. anything after that and i would consider running extended studs.. only because i see your going turbo and that extra TQ and wheel hope your gona have is gona be murder

I won't be going turbo for a while.
I just started school, so I probably won't be installing that till next spring.

Where can I find extended studs and how long should I go for a nice flush look?

http://i78.photobucket.com/albums/j97/BlkTC/january%2013%20photoshoot/DSC_0823.jpg

DDAAAAAAMMMMMMNNNNN

^^x2 thats so sexy

getaforknjob, just buy bolt on spacers.

or get wheels with the correct offset in the first place :/

I'd rather cheat if it's going to save me a couple hundred dollars.

DDAAAAAAMMMMMMNNNNN

lol thx big bird

getaforknjob, just buy bolt on spacers.

Where can you find them?
I just did a quick Google search and I couldn't really find anything.

optionimports.com

or get wheels with the correct offset in the first place :/

this

getaforknjob, just buy bolt on spacers.

not this

http://i31.photobucket.com/albums/c390/donttouchmebia/778859516_KFQEs-L.jpg

http://i78.photobucket.com/albums/j97/BlkTC/january%2013%20photoshoot/DSC_0823.jpg[/QUOTE]

My dream is to have my car look like yours although i have a superwhite

http://i31.photobucket.com/albums/c390/donttouchmebia/778859516_KFQEs-L.jpg

damn, first time ive seen this car.
not feeling the front lip, but im lovin the stance!

defiantly looks good and at least they arent grids!!!

But what's wrong with Grids? =P

http://i926.photobucket.com/albums/ad108/grumpy6489/SD%20Meet%202-6-10/10_110.jpg
http://i926.photobucket.com/albums/ad108/grumpy6489/SD%20Meet%202-6-10/10_73.jpg

But what's wrong with Grids? =P

http://i926.photobucket.com/albums/ad108/grumpy6489/SD%20Meet%202-6-10/10_110.jpg
http://i926.photobucket.com/albums/ad108/grumpy6489/SD%20Meet%202-6-10/10_73.jpg

Ha i see the tripod from the reflection on that shiny paint

But what's wrong with Grids? =P

]

the 20 other people on this forum that have them. lol

at least you have the most aggressive ones.


and Sci_tC_05 there is no need to qoute pics when it is on the same page, especially when it is the post above you.

Lol sorry just admiring the nice paint job

damn...

Love all the above....stance FTMFW! TiTs

My dream is to have my car look like yours although i have a superwhite

lol thanks buddy! :icon_mrgreen:

aww how cute

damn, first time ive seen this car.
not feeling the front lip, but im lovin the stance!

yea man the lip is killing me too. its broken on my so many times from driveways n ish. my homies giving me his OEM one soon. time to put my painting skills to the test yet again. im thinking about painting the wheels white. opinions?

http://i31.photobucket.com/albums/c390/donttouchmebia/P1010806.jpg

still trying to pull the rears a little more. i dumped the coils since that photo but with spacers its rubs hard.

^what are the specs on those? they look sick!


and Jaewreck, your fender looks like its in pain!

I am definately falling in love with the Aggressive stances... dare i say it?? I think I'm about to drop a Ish load of money on my car... Please dont post any more jajajajajaja Im gonna get sucked into this also!!

white would look nice however they look awesome the way they are.

yea im torn. i like the color already but i want something that pops. ill give it more poke first then see where my heads at

sell me your grill and I will tell you my little secret color that will look sick on your rim

lol i might be in the market of selling itactually. im getting kinda tired of it and might put on my stock grille again. ill letchu kno

and Jaewreck, your fender looks like its in pain!

Yeah my front fenders are pretty beat. I need to get some new ones and pull the crap out of them.

white?
do itttt!

as soon as it stops effin raining here in the bay.

prob bout to get flamed for search tab.

195x7.5...?

^what are the specs on those? they look sick!


and Jaewreck, your fender looks like its in pain!

spec? not enough poke!

yea my fenders look rough up close. but thas cuz my homie yuta and i were drunk rolling my fenders! haha. good thing he didnt drive his 240 home.

prob bout to get flamed for search tab.

195x7.5...?

what is even the question here

spec? not enough poke!

yea my fenders look rough up close. but thas cuz my homie yuta and i were drunk rolling my fenders! haha. good thing he didnt drive his 240 home.

lol..crazy! They dont look that bad. And paint them white ALREADY! :icon_mrgreen:

can you mount 195 tires on a 7 or a 7.5 width rim?*

yes...you can mount a 195 on an 8 or 9 if you really wanted to.

yes you can mount that, it would probably be a baby stretch

spec? not enough poke!

yea my fenders look rough up close. but thas cuz my homie yuta and i were drunk rolling my fenders! haha. good thing he didnt drive his 240 home.

Were those Pictures on the last page with or without spacers?? c'mon give us specs! lol

without. ill post specs once its done. it isnt that hard to guess tho

Were those Pictures on the last page with or without spacers?? c'mon give us specs! lol
x2!!! please :pray::pray:

I am gonna go out on a limb and say..18x9.5 +35et..I am just guessing.:lalala:

I am gonna go out on a limb and say..18x9.5 +35et..I am just guessing.:lalala:

arent those grids 18x10 +35

^^Jaewreck grids are 18x10. i am guessing ktothesass DPTs are probably the 18x9.5 +35 or +38

i thought a lil googling could go a long way...just sayin'

i didnt even have too look them up because 10 people have grids and the dpts come in the same specs pretty much. plus i have looked at wheeldude.com like 20 times because i want some these at one time, lol.

i those look way better than grid, imo

http://farm5.static.flickr.com/4021/4287942759_0ed83294a0.jpg

http://farm5.static.flickr.com/4021/4287942759_0ed83294a0.jpg

Seen that car in person and I must say it looks sick.

I love how everyone manages to sneak a 'c' into my sn. jaewreCk
haha happens all the time with my name too. =P

^^my bad man i just copied it from someone elses post

Haha it's ok. I just find it funny that the adding of 'c' has followed me online in my SN as well.

http://farm5.static.flickr.com/4021/4287942759_0ed83294a0.jpg

are the new corollas/matrix 5x100?

That's a fresh 'rolla.

are the new corollas/matrix 5x100?

yes

Was over at the corolla forum and seen this....
http://farm4.static.flickr.com/3555/3343723342_015a5fd2ff_o.jpg

http://farm4.static.flickr.com/3636/3342929333_217416ff69_o.jpg

^^he has different rims now

^that's puurty!

idk if you could qualify me as being aggressive any more, especially since I sold my VS-XX, but I was getting tired of having weak fitment and not rubbing w/ the GTC01s, so I picked up some spacers.

Final et: 18x8 +32 18x8 +20. Not the most aggressive, but still not bad for a daily beater, and yes I beat the ____ out of my car now lol

http://i797.photobucket.com/albums/yy252/sky_on/IMG_2208.jpg

http://i797.photobucket.com/albums/yy252/sky_on/IMG_2204.jpg


http://i797.photobucket.com/albums/yy252/sky_on/IMG_2209.jpg

wait what happened to the vs-xx's?

sold em

more low!

sold em

i knew that but why?

more low!


^^ LOL man... it's only low enough for you if the tires are on the pavement but you're driving underground. :P

i think the five axis kit only looks good on darker cars.

there is that white tc with it and green grids and it looks amazing.

NYNCTC: sold them to help fund a new project, got sick of working on the tC, now its just my daily beater

Corey: haha, I'll never be low enough for you, but this height helps get me around town w/o destroying the kit =]

NYNCTC: sold them to help fund a new project, got sick of working on the tC, now its just my daily beater

Corey: haha, I'll never be low enough for you, but this height helps get me around town w/o destroying the kit =]

I think I'm gonna cry :( Those wheels looked Hawt on your tC, member a while back I made a sig' like pic for yours with the vs-xx's

there is that white tc with it and green grids and it looks amazing.

can't find pics of it.....it is in the grids thread?

clicky (http://wfcrew.forumotion.com/fwd-f24/azndragon669-scion-tc-t529.htm)

OMG.....i think i'm sold to a five axis lip kit lol. Anyone care to purchase my carbon RS1 lip kit? I'll need baller wheels to go with the five axis.

http://i199.photobucket.com/albums/aa307/azndragon669/Base12.jpg

The red calipers are lame. Everything would flow so much better if the calipers were gold.

theres something about his car that doesnt sit well with me. its prolly that stupid spoiler. if he took it off then this would be a diff story

clicky (http://wfcrew.forumotion.com/fwd-f24/azndragon669-scion-tc-t529.htm)

nevermind..not her lol

and that bamboo ... man.. lmaoooo dude just killed the car completely

agreed that bamboo is effin ugggg

the only thing I like on that car is the fiveaxis kit lol. Stance is nice, but hate wheel color and those wheels. And I am not a stretched tire kind of guy lolz

If you want different color calipers get a BBK..painted calipers look cheap and tacky IMO

just paint them black or leave them silver...i did mine red...fail...lol oh well haha doing them black

i dont like how she positioned her axis sticker onto her side skirt. Kinda throws everything off for me but I do like the bride and anzo tails.

just paid for my 18x9 et 31 AME FS-01 in bronze!!!!! after the adapters they will be +16 :)

i thought the five axis has a specific spot like the kaminari kit for the decal.

My wheels just came in yesterday. (: Now I'm waiting to order my coilovers then i can post pictures in this section.

18x9.5 +38 SBC RPF1's

just paid for my 18x9 et 31 AME FS-01 in bronze!!!!! after the adapters they will be +16 :)

My wheels just came in yesterday. (: Now I'm waiting to order my coilovers then i can post pictures in this section.

18x9.5 +38 SBC RPF1's


WAITING ON YOU BOTH!!!! PICS ASAP!!!!! at least of the rims only <3!!!

theres something about his car that doesnt sit well with me. its prolly that stupid spoiler. if he took it off then this would be a diff story


yeah and cant quite put my finger on it... but it just looks to me like the kit was put on by several small blind tree squirrels buzzin' on caffeine. lol

WAITING ON YOU BOTH!!!! PICS ASAP!!!!! at least of the rims only <3!!!

lol i'll have pics of the wheels up a week from tuesday... hopefully if i get my adapters in before then i can get the wheels test fit and mounted :)

try to get a proper shoot with the new kicks. there's no excuse not to since everyone and their mama have nice cameras :lol:

well i dont have a nice camera, so im gonna have to find someone near me with a good camera to do a proper shoot. so i'll do the test fit pics with my iphone and then hopefully a proper shoot after that.

how much?

1500 obo+ shipping.... :( why now!!!!!! when i have no money!!!!!!!!!!!

lol i'll have pics of the wheels up a week from tuesday... hopefully if i get my adapters in before then i can get the wheels test fit and mounted :)


:eyes:Want now....:eyes: jajajajaja dont worry bro, take your time, when You're ready to show off, show off in style! :)

I'll have pics don't worry

I'll have pics don't worry

Saaaaaaaweeeeeeeeeeeeeeeet!!!! :):pray::pray::pray::pray:

Just added 15mm spacers in the rear and dialed some neg camber...and like others still having problems with that bumper lip rubbing..I had to raise it a bit!

http://i109.photobucket.com/albums/n76/dqlostsoulz/DSC_0087edit.jpg

Sexy!!! , and sexy lanyard too!!! I see what you did there!

just get a pole/hammer and bend that part back.. you don't even need to take the bolt out..

What really wont the paint crack??? I removed the bolt hammered in that part..shaved down part of the lip and fender lining and still rubbing.

sitting nice joey

Thank you kevin, but dam I just took it for a test drive and that metal piece where the bolt goes is eating at my tires. I am pretty much rubbing on all four

http://photos-h.ak.fbcdn.net/hphotos-ak-ash1/hs295.ash1/22239_328160217058_643122058_4701257_2066502_n.jpg

it might be the angle but your toe looks very off in that pic.

heres an old pic, but by looking at the tires you can see if i had the camber out to like -1 or even -1.5 (instead of -2.7/-4.4), there would be too much poke lol..
i kind of like where its poking right now but i might dial it out just a bit more for a little bit more poke
http://farm5.static.flickr.com/4021/4285469023_772f2fb4e6_b.jpg
yes i know my picture is hazy lol, also new pics whenever 08tc gets his camera, and or when my other friend wants to shoot my car.. lol

fiendskillz does your tire rub on that rear bumper lip where the bolts at? And if not what did you do to prevent it??

no, because i have that part shaved and no bolt on it.. in the picture provided up top it sticks out cause nothing is holding it back on the panel..
but im probably gonna drill and relocate the hole and put a zip tie to try to hold the fender as so it won't stick out.. it doesnt really bother me because it doesnt pop out that much unless your looking straight at it or know its out of place lol

What did you shave it with? And mine looks like that as well. i removed the bolt and hammered it in and it still hattin on my tires.

just a dremel.. and i also have 225/35 on 10s lol

Dam fat tires of mine! I guess I am gonna attempt to shave the crap outta of it. Any tips??

lol just dont shave the hole thing off!.. i have mine shaved like a curve. sorry i dont really have any pictures of it.

can you get one :) i wanna see if you shaved off the same amount as me? i just have zip ties holding it on....

LoL!!!poor car is gonna be hatin on you because of this, jjajajaajajajaj

What really wont the paint crack??? I removed the bolt hammered in that part..shaved down part of the lip and fender lining and still rubbing.

take out the plastic piece that's attached to the bumper.. that might'be been one of the problems..

take out the plastic piece that's attached to the bumper.. that might'be been one of the problems..


See Ben this is the same prob i was trying to explain to you about. When i would drive off the bumper clip would get caught on my tires and rip off!

take out the plastic piece that's attached to the bumper.. that might'be been one of the problems..

No it is definitely not the plastic part. It is the metal part that just ate my tire.

You have to shave that off and drill a hole in the fender and bumper and use a ziptie

alright well im looking to get "aggressive" wheels soon! YAY! haha but im not going anything over 17's

im looking at 2 sets of wheels. 17x9 +35 is the first set (all around) and 17x9 +30 is the 2nd set (all around) do you guys think fender rolling/pulling will be necessary? and which one do you guys think i should go with? is that extra +5 offset a big difference? what do you guys think? any advice would be great.

also ill be looking into tires aswell. somehting stretched but nothing crazy. will 215/45/17's be fine? and again will i rub? ill be around 2.4'' front and 2.0" back

thanks

You have to shave that off and drill a hole in the fender and bumper and use a ziptie

This is what is looks like after beating it with a hammer...

http://i109.photobucket.com/albums/n76/dqlostsoulz/DSC_0092.jpg

you dont even wanna see my rear wheel well^

http://i31.photobucket.com/albums/c390/donttouchmebia/afterwhite.jpg
put in work today n painted them

ballin. I'm lovin the white on blue.

ktothesass, you know how it is..lol! Man my fronts are rubbing bad and I am afraid I am going to dent my quarter panel again when I turn.

Nice did you just change the color?

This is what is looks like after beating it with a hammer...




nice!! mine's completely flat.. but since i had to bend the metal part that touches the bumper, the bumper doesn't sit flush.. but at least i don't have any metal cutting the tires..

im still having a hard time trying to figure out what you took a picture of?

im gonna be doing some work on mine tomorrow tho :)

BlkTC, how the hell did you get yours flat? I was banging the crap out them lips..:tongue:

im still having a hard time trying to figure out what you took a picture of?

and kevin its a picture of the rear lip bumper (inside) where the bolt was. I just cut some of the plastic off, trimmed off some bumper lip, removed the bolt and hammered away an the medal piece. Than painted it white so it would't rust.

ktothesass, more pics!

^that

do they glow in the dark?
http://fatlace.com/hellaflush/wp-content/uploads/2009/12/IMG_2027_.jpg

http://farm5.static.flickr.com/4001/4203140012_27ed1bb72a_b.jpg

ha no. thas anthonys matrix.

this is the car i got my inspiration from http://i31.photobucket.com/albums/c390/donttouchmebia/DSC_0172.jpg

http://i31.photobucket.com/albums/c390/donttouchmebia/1.jpg
http://i31.photobucket.com/albums/c390/donttouchmebia/2.jpg
[IMG]http://i31.photobucket.com/albums/c390/donttouchmebia/3.jpg[/IMG

That white pops hard!!! Looks hella fresh. Job well done.

http://i31.photobucket.com/albums/c390/donttouchmebia/3.jpg

Can you take a side profile photo?

Kevin putting in werke..love it!!

http://farm3.static.flickr.com/2717/4360209261_b5b19b6fe7_b.jpg

http://i109.photobucket.com/albums/n76/dqlostsoulz/DSC_0143edit.jpg

did u raise the front back up?

a little cause it was embarrassing driving around and all you heard was rub a dub dub!

alright well im looking to get "aggressive" wheels soon! YAY! haha but im not going anything over 17's

im looking at 2 sets of wheels. 17x9 +35 is the first set (all around) and 17x9 +30 is the 2nd set (all around) do you guys think fender rolling/pulling will be necessary? and which one do you guys think i should go with? is that extra +5 offset a big difference? what do you guys think? any advice would be great.

also ill be looking into tires aswell. somehting stretched but nothing crazy. will 215/45/17's be fine? and again will i rub? ill be around 2.4'' front and 2.0" back

thanks

just copying this for some help.

what do you guys think? im leaning more torward for the +35's but will i rub??

You will rub!..

damn the devil. but hopefully not bad

Go 17x9 +30 with 215/35/17 and roll your fenders. you shouldn't rub too bad maybe on bumps and things of that nature.

yup just roll your fenders and you should not rub n the back not unless u have be n the back!.. bumps u might rub.

i have a feeling i might not have to roll fenders. i might have to take off the fender lining for the front. im gonna go with 215/45's for now since i have new ones on my stockies. ill end up rubbing on bumps and dips and stuff.

but i think i ende dup choosing the +35 wheels cause i like them better. maybe a 5mm spacer or something

you will have to roll the fenders but not a whole alot.

yea i figured nothing TOO drastic. i wanted to avoid that

The car is lookin real good DQ!

Thank you getaforknjob!

Nice! DQ, Im a sucker for some flush meshies!

me too :love:

a little cause it was embarrassing driving around and all you heard was rub a dub dub!

needs more stretch!

yeah I know. Thats on my to do list

yeah I know. Thats on my to do list

Add [take more sexy offset pics] to the list!

not quite aggressive but still sexy

http://farm3.static.flickr.com/2187/4363022310_e8719573bf.jpg

adding 5mm up front for now then once i do all the fender work, 15 front and 10 rear.

bary nice!

not quite aggressive but still sexy

adding 5mm up front for now then once i do all the fender work, 15 front and 10 rear.

... It is quite sexy!!!!

dope whip man

I'm up for more pics? anyone care to lend their car picture, to this Ol' thread?

^ here you go.. :P


http://farm5.static.flickr.com/4006/4365017405_82c5362510_b.jpg

oh I think I found a new wallpaper. My last three wallpapers has been of your vehicle.

Jizz in my pants!

sick wheels dude!!!

but i cant believe u beat me to them :(

lol

got my studs and spacers for the front... put them on and then.... on full lock left, tire hit a small bump and the tire grabbed my fender... ooops hahahaha

http://photos-g.ak.fbcdn.net/hphotos-ak-snc3/hs167.snc3/19453_499758025462_852210462_11277988_536130_n.jpg

that sucks man. my fender got a lil kinked cuz my wheels hit it on a turn but nothing that bad

haha.... back to the drawing board... more camber ftw!

ouch i have the same problem.

oooh i feel yah =\

..as well as I..=\

Camber ftw!

^so does negative camber get rid of the tire/fender hitting issue?

taking notes for future setup, lol

^^Helps

^so does negative camber get rid of the tire/fender hitting issue?

taking notes for future setup, lol

so this risk never goes away? even with wide wheels and stretched tires?

Ask jaewrek he is putting it to the limit. I have to be very cautious on turns and drive ways..things of that nature.

My only advice is keep your wheels straight whenever you go over something that pushes your suspension up. Driveways, speed bumps, turns with random ___ bumps.
Every time my fenders dented in was after going up a drive way.

I think stiffer springs would help, because your suspension wouldn't travel as much.
I'd assume camber would help. I don't know cause I don't have any =(
But I also thought it might make things worse if the wheel is cambered in, when you take sharp turns I think the upper rear portion of the tire would stick out more during a turn than if it wasn't cambered in. *shrug*

you guys do know there's more to it than just camber, right? caster can also be changed so that when you turn, your wheels camber in. if suspension travel is an issue, just stick in a spring spacer. or get air cups lawl

Air cups?

you guys do know there's more to it than just camber, right? caster can also be changed so that when you turn, your wheels camber in. if suspension travel is an issue, just stick in a spring spacer. or get air cups lawl

No I did not..how is that achieved??

Ya, I've been looking up how to adjust caster, no luck care to elaborate?

aircup:
http://www.youtube.com/watch?v=upGAjGXPA54 (http://www.youtube.com/watch?v=upGAjGXPA54[/youtube)
Basically little air bags that go on top of coilovers so you can get air ride adjustability and coilover performance. they cost just as much as airbags... so yeah, probably not something for scions.

caster:
To give you a visual example, look at the front of this
http://shoutingthomas.typepad.com/photos/motorcycle_pictures/chopper1large.gif
That's hella caster right there. I'm sure you can guess that a car's steering angle is a lot more perpendicular to the ground than that. I suck at explaining things, so
http://www.240edge.com/performance/tuning-caster.html
wikipedia does wonders, btw.

if you want to adjust it, i would definitely say go to an alignment shop. Just like adjusting camber and toe on stock bolts/arms, It's not an easy task, and i'm not even sure if it's possible to adjust all too much on our cars.

^i know what caster is, but im sure there is no caster adjustability on our tc's

Caster is not adjustable on the tC that I know of

if you have coilovers with adjustable pillow mounts then you can. :)

adjustable pillow mounts allow camber adjustment, i havent seen one yet with caster.

what if you mount the top hat so it adjusts it front and back instead of left and right? lol

:ponder:

what if you mount the top hat so it adjusts it front and back instead of left and right? lol

some wont do that, and then you lose camber adjustments. plus im not sure if that will even work.

you can do that. That was what I was referring too. Then get ingalls camber bolts for the front. Best of both worlds :) I currently have this kit on each side running a little over -2* of camber (had to do this since the HKS coils don't have adjustable pillow mounts).
http://www.dezod.com/pd_ingalls_engineering_front_camber_kittc_05.cfm

This guy did this a while back I believe.
http://www.scionlife.com/forums/showthread.php?t=167774&highlight=275+tires

if you have coilovers with adjustable pillow mounts then you can. :)


didnt even think about that, but yes hes right! although its only gonna be a max of 2 inches i think and i dont think that would fix the issue..

im just gonna be as careful as possible,lol

Caster is not adjustable on the tC that I know of

I believe the rears have factory caster adjustment. Its the bolt on the chassis side of the rear camber arms.

*Edited* my bad I meant toe lol

I believe the rears have factory caster adjustment. Its the bolt on the chassis side of the rear camber arms.

*Edited* my bad I meant toe lol

thats camber. i know for a fact there isnt caster adjustment for the rear

dave photos now!

lol i dont even have my sht yet :rofl:

camber links will be here tuesday with adapters. and im gonna try to hunt down Fed Ex on tuesday also to pick the wheels up. then im goin to the tire store to get 1 tire mounted to 1 wheel so i can test fit them :D

gonna try 205/40's first :nails:

Dave what specs are the wheels?

18x9 +16 after 15mm adapter. The wheels are 5x114.3

You'll be half inch farther out than me... wow lol

annd 8mm less poke from me. :D

Hahah yup I can't wait

me neither.. i'm anxious to see how they'll look on a tc..

They will look great I know it

they will look sick!

^that

pics tomorrow hopefully

pics tomorrow hopefully

this

^that

Haha

What wheels again?

so, i just got my car back!

ill be posting here soon!lol

holy hell RUB A DUB DUB!! AND I LOVE IT, LMAO

tomorrow morning im taking my fender liners out, the rear is perfect!

anybody want to run these?
http://www.rbwheels.com/index.php?main_page=product_info&cPath=33&products_id=2024&zenid=c815d26fd18c0fa20ef0af0fb76c77d9

good luck running those

they'd fit a xB with camber

What wheels again?

http://image.importtuner.com/f/9873208/0707_impp_01_z+import_tuner_parts_review+ame_tracer_fs01_wheels.jpg
:cool:

dave what kind of adapter's you running?

project kics

^win

dave do it up now maynnnnneeeee... light a candle and get to work lmao!

lmao! pete you crack me up.... i broke the candle... dropped it and the glass shattered :(

wheels wont be here till thursday :icon_frown::evil::evil::evil::evil::evil:

thought they were the 17's.

im looking at a set of 17x9 +30 or +35, I thought that was them

Nah I remembered his thread: http://scionlife.com/forums/showthread.php?t=166940

Here's some 17x9s:

http://farm5.static.flickr.com/4043/4377972977_7f8dd280bf_b.jpg

those are the ones im getting!

17x9 +35 tiffany green :love: i wonder how bad im gonna rub though ill be on stech height

It might rub a little. The 9s sit in 7mm more than the 9.5s.