4 wires going to tweeters?

Reply Subscribe

Thread Tools

Search this Thread

06-13-2008, 08:36 PM

detroitbassxb

Senior Member

SL Member

Thread Starter

Join Date: Jan 2008

Posts: 161

4 wires going to tweeters?

I just removed the panel for the factory tweeter and noticed it has 4 wires going into it. Any idea why?

06-13-2008, 08:53 PM

equinox2355

Banned

SL Member
Scion Evolution

Join Date: Jan 2006

Location: Fremont, CA

Posts: 3,346

If its anything like the tC, the crossover is in the tweeter.

06-13-2008, 08:56 PM

detroitbassxb

Senior Member

SL Member

Thread Starter

Join Date: Jan 2008

Posts: 161

Quote:

Originally Posted by equinox2355

If its anything like the tC, the crossover is in the tweeter.

So is there really no way to run aftermarket components with the stock wiring? My amp won't be here for a few more days and I wanted to install my new components and just run them off the HU until then.

06-13-2008, 09:08 PM

equinox2355

Banned

SL Member
Scion Evolution

Join Date: Jan 2006

Location: Fremont, CA

Posts: 3,346

If you replace the whole speaker set (tweeters and mid) with a component set (one with tweeters and mid and crossover) then you can without a problem. The most important part is the crossover.

06-15-2008, 02:18 PM

rockthebeef

Senior Member

SL Member

Join Date: Oct 2007

Location: San Diego, CA

Posts: 615

I figured this one out a while back. Read this thread:
https://www.scionlife.com/forums/vie...250&highlight=

If you stare at the wiring diagram long enough, you'll see how it's wired. Hope this helps. Good luck.