Many of you have been asking if my brackets fit the Second Generation Scion..

and yes it does!!

Just had a chance to test the prototype on an XD..

To order visit my wesbite but the site hasnt been updated yet.. so just order the XB one and make a note in paypal that its for an XD.. the differance is i had to use a larger washer..

 

Thats what I need.

 

Are there better, clearer shots of the bracket?

 

LOL. i'll take pics later. he used his new camera at night with no flash i was tripping of how clear for being in the dark with no flash.

 

Have you tried the fit on the DAMD lip kit on the RS 1.0?

Didn't look too supportive.

 

just take a look at my website.. there are pic of the actual bracket..

must have sold over 6,000 bracket to date.. IT mounts the same way as the 1st and 2nd gen xb and also the XA and TCs..

here is more clear pic of it on the XB.. mounts the same exact way..

 

how much are you asking? I'm pretty sure I can make that for $5 or less at Home Depot Don't mean to be a jerk or anything

 

i've ran it on other scions for a few years and haven't had any problems with it. if not just drill your bumper if you doubt this product.

 

it was like 14.99 + 5 for shipping.

 

No doubt on the product... DAMD lip kit did not look to support such a mod... Just wanted to see if it had been tested...

 

for SE members... if you want to test it first.. Ill gladly send one to you.. as long as you post pics of it works.. Just PM me the info.. on the SE forums

1000s are already moutned on 1st gens.. and not one neg feed back yet..

Its easy to make yourself if you have the tools and the time but most people dont want to bother. infact theres even a how to onhow to make it yourself..

 

Just went to the dealersip to check out the RS XD, it fit the RS1 XD with the Damd Kit.. its the same bumper and grill..

 

so far 3 people ordered..

 

Color me interested... can you explain how the bracket attaches without drilling? I can't tell how it works from the pictures. In the pictures it looks like it just fits into the space under the bumper using gravity to hold it into place. I'm a bit worried that I'd lose my license plate when I hit a pothole (of which there are plenty here in Buffalo)

 

Looks like it has something in the back of the grill, meaning you'd probably just have to tighten the nuts on the front so it would squeeze onto your grill preventing movement.

No pics on the website of the bracket not installed on the car either. You should probably post pics of what it looks like out of the box and not installed on a car to give people a better idea what they are going to have to do to install it.