Does any one make a 3in drop for the xa? All ive seen is the 2.5 Ive done a search and came up with nothing.

dunno where u found 2.5 but u should be happy with that. lol it'd have to be a coilover setup or a bagged setup

Cusco Vacanza V-Wagon Coilovers can go up to 3.9 in the front and 3.3 in the rear.

So coil overs is the only option?

coilovers or bags

you maybe able to use Springs w/ Sleeves to get that low, but you won't be happy with the quality, ride or otherwise. stick with the Coilover, Cusco, Tein, Tanabe or HKS.

Cut springs :twisted: , but like everyone else coilovers or bags is the only options.

Yeah dont want to cut the springs or even heat them Had a friend that the springs craked on him because of that.

you should look into the easy street bags, it will run you about as much as the cusco

http://www.scionlife.com/forums/viewtopic.php?t=36818

To get better results on spring drops this topic is moved to the right forum and my opinion leads to the bag drop or coilovers! :D

what are the dimensions of the actual 5 gallon tank?

the five gallon tank for air suspension??

it wont fit under the car if that's what your'e trying to figure out. if u want under car you will need a 2 gallon tank or two 2 gallon tanks. when i do mine i will have two 2 gallon tanks.

a five gallon tank will fit under the car. thats what eric m ran and what I will, and this other dude, here is a pic

http://www.layitlow.com/forums/index.php?act=Attach&type=post&id=32830

thats not the tank that is in the airlift one tho. but hmm. maybe i'll do that it looks a lil tight tho.

ohh your talking about the easy street kit.... well they are probably the same size, but there is no reason to pay for the tank to be chrome when all it will do is pit on the underside of your car

yeah lol. i'm not gettin the easy street/air lift kit i'm just buyin the front and rears and then running a fbi air management package. and the easy street tank has funky brackets and the ports are in weird locations. . nothin that cant be fixed or ditched.

i'm doing almost the same, except i'm going to run parts from www.suicidedoors.com

everyone says they have the best prices out there

oh well my buddy has a dealer license so he can get em for me for sooo cheap. front strut bags and reas setup from easy street for cheap the fronts will be like 380 and the rears like 200.

thats good, i'm getting it though the groupbuy

http://img.photobucket.com/albums/v36/katch/scion/jonsist11-04bsm.jpg
here's an ist in hawaii with the tein coilovers, with about a 3" drop. these are with his old cheapo raze rims.

i will try to post pics with his new set up with the ssr's.

http://img.photobucket.com/albums/v36/katch/scion/jonsist11-04csm.jpg

http://img.photobucket.com/albums/v36/katch/scion/jonsist11-04csm.jpg
different angle

http://img.photobucket.com/albums/v36/katch/scion/jonsist11-04asm.jpg

I hope yall have nice roads there. that bumper would be gone if he drove it here

it's sittin awfully hign in the front. i think that's just the bumper tho. but sweet and those cheapo raze wheels look nice. it's not about how much money you spend it's all about how nice they look.

it's not to high i think it was about 3 or maybe 4 inch clearance. and it's being driven alot recently our pot hole infested roads.

i took a newer photo, but we were in the shade so it's kinda bad. those are ssr vienna kreis, the backs are running 18x9

http://img.photobucket.com/albums/v36/katch/scion/jonlip.jpg

dude that looks flippin awesome. check out my myspace bro add me.

sorry its a bad angle and shadow. i will try to get a better flick to show how tight that is and how much it's stretched to fit like that.

That white ist/xA looks sweet. The ssr rims are niiicee..nice phat lip. :D