From browsing around i haven't really found too many people doing very aggressive setups on their tc. At the moment im working on my wife's tc, because my supra is gone for the moment; it is sent out for paint, interior, and my works are in transit from Japan. My wife is a big fan of aggressive staggered setups so im trying to accomodate her wishes.

I have an eastwood fender roller and will be rolling her rear fenders.

I am wanting to run 18x8 in the front and 18x9 in the rear. I looked at the wheel fitment chart and im trying to push the limits alittle. Im wanting to run somewhere like +30 front and rear +20-25.

Tires sizes will be most likely 215/40 and 235/40

Are these offsets going to be good for the rear with simply rolled rear fenders. The car will be going to paint in the spring so i might just pull the rear fenders. It is stock height right now. But i i have s-techs coming with her carbon lip kit and hood.

 

no you're going to have to pull the fender, cut it to get a 9 +20 with a 235 to fit.

 

hey ben, what about 17x8 +20 offset with a 215?

would that work?

 

that will be close, depending on your drop you'll probably just have to roll and cut

 

What the OP wants sounds exactly what HKSpeed is running.

 

no the ops rears are more aggressive than hks's by about 10 mm

 

That's not the same?

 

whoops. hahaha forgot about the spacer

 

ahhhhh screw it. i was going to have the old school vw steelies custom made for the car but i can't find a good vendor.

ben any advice?

 

you want steelies or what do you want?