Injen SRI **Help**
#1
Injen SRI **Help**
Ok so i bought a used Injen SRI for my 08 xB... I put it on hooked back up the vacuum line and installed the sensor... when i start it up i dies after about 2 seconds.. anyone have any ideas?
#2
been there done that (on my Perrin)
The MAF sensor wont work backwards the air has to flow the right direction over it ,the MAF may be mounted in housing backwards or the tube the housing is welded too is backwards. flip it around and it should work
The MAF sensor wont work backwards the air has to flow the right direction over it ,the MAF may be mounted in housing backwards or the tube the housing is welded too is backwards. flip it around and it should work
Thread
Thread Starter
Forum
Replies
Last Post
CrowJenkins
Scion tC 2G Owners Lounge
5
10-09-2015 10:47 PM