I bought my Emanage a few months back, and since I'll be hopefully receiving my kit here very soon, I thought I should work on my Emanage Blue harness. I discovered I had to actually place the metal connectors on the wires into the plastic connector on the main harness and ignition harness.

I found a couple of images that had the diagrams but they were really hard to read.
http://www.mohdparts.com/emanage/man...-manage_23.JPG
http://www.mohdparts.com/emanage/man...-manage_24.JPG

I made my own diagram and wonder if you guys could confirm that I have the pins correctly inserted into the plastic connector. Thanks!

 

Hmmm the site I was going to give you, you already have above, maybe contact Dezod/P-Tuning or GReddy customer service

__________________

 

bump

 

The colors are irrelevant if you keep track of what is what and wire it in correctly. This is why PnP harnesses make life so much easier. Easy to do and undo.

 

I agree PnP harnesses make life so much easier, but its a bit out of my price range. =(

 

Yeah they are expensive, but you get a lot of support and guarantees with it. Check out the classifieds.........