Hello Everyone!

I bought a brand new set of OEM fog lights for my '06 xA on eBay for under $100, however, when I received them today I noticed that all the mounting screws are missing!! :( Does anyone know what kind of screws they are (size, thread type, etc.)? Since it didn't even come with one of them I'm not sure what to look for at the hardware store. I'm really anxious to set these up, so I'm really disappointed that I'm missing these little screws.

Any help would be greatly appreciated!

Thanks,

Charles Lhermitte

No one..?

I doubt anyone just knows off the top of their head, and the fogs are a pain to get to just to check a screw size/type, so your best bet might be to just call a dealership and talk to the parts dept. They can probably help you, and might even be able to provide you with the screws.

I just put a set in my car this weekend...the holes are not threded into the plastic yet so you can just go to home depot or ace and get 8 half inch screws,make sure they are pan head not counter sink screws I think they are #6 or #8 in size,take the bracket with you to the store. They should screw in a little tight but not crack the plastic.3 screws for each bracket to the bumber and 1 for each fog light to the bracket, all 8 are the same size. Hope this help you out!