Disclaimer: This is NOT a full S/C Kit, this is just Miscellaneous parts

From what I know, these parts were previously used solely for display purposes, there may be a few parts that were mounted, but they were never used.

Here is a list of my inventory. PM me an offers and we could work something out, I'm willing to ship parts, but it will be at owners cost.

Unfortunately I'm unfamiliar with the part numbers, I just followed the instructions manual to see what parts I had available, the manual can be found available here:
http://trdsparks.com/install/PTR01-21050-90inst.pdf

UPDATE!!! 10/20/09
This is all I've got left:

http://media7.dropshots.com/photos/668526/20091020/135652.jpg
http://media7.dropshots.com/photos/668526/20091020/135742.jpg

1 Intake boot Fender to Airbox: $40
1 TRD lower airbox: $50
2 Air Filter 17801-03010: $20
1 TRD HC Filter/Trap: $10
1 Hose, Airbox to SC Intake "Tuba": $40
1 Hose, Bypass to SC intake : $40
2 Serpentine Drive 7PK2275 Belts: $25
1 Bosch Bypass Balve: $45


All Prices will add 3% paypal fees and optional shipping at buyers expense

I think that's pretty much it. I will send close up pictures upon PM request. Like I said, PM me prices because I honestly don't know how much these parts go for, I just want them out of my room.

what size are the injecotrs and you say its a full set? also how much? you can write me at jar2709@yahoo.com or call at 315-4861152

pmed

^^ haha dude like PM'd 3 times, I'll get back to you tomorrow w/ pricing

PMED about oil pans

PMed

hehe!! I kinda over did it but dibs...lolZ!!

any idler pullies?

all PMs have been returned

are the idler pullies the 2 smaller ones? if so then yes I do have a set

oh man :D you are a collector! bump!

dude.. you down to finance?? lol.. and can you piece it for me too?!

bump for a legit dude with legit stuff for sale~

ben, i know i'm your role model, but you don't have to copy everything i say.

lol.. but i want to sound stupid!

watching...

haha thanks Jon, if it does get a sale, then I'll def get you a burger! =D

what about me and matt???

haha i'll treat you guys to some TF Yogurt =] and maybe a burger too...since In n Out is right there =P

bumps, seems like I'm getting a good amount of lowball deals, I'll entertain 'em for now, and I'm open to deals, but c'mon people...these parts are way pricey at dealerships, I'm trying to cut everyone a deal!

I sent you a PM with a reasonable offer but go no response?

sorry, i just PM'd you back, been busy, need to study for midterm, and SL is distracting me, lol. I'll price everything out and shoot you final PM tonight

hmm.. apparently, s/c's are now discontinued..

oooohhh, they are discontinued...people better jump on these parts while they last then...

holy crap.. that sucks. lol, i better start seeing some jackson racing superchargers out for our cars then..

watching

PM's replied

Do you have a complete set?

for those inquiring, unfortunately i don't have a complete set, missing a handful of pieces that have yet to be sourced out.

Bumps for good stuffs!

all PMs have been replied, now I'm just waiting for respond PM's

alright, so I'm moving out of my apt in 3 weeks, and I want this crap gone by then so people just start shooting me offers. Please only shoot me offers on the parts listed, all other parts are being kept until further notice

Do you have any idler pulleys?

whats the lowest your willing to go on just the supercharger assembly, i dont even need the shaft, just the heavy housing part with the gears and impeller

^^ PM'd

Friday Bumpz

bump for yelsew
i honestly JUST got that.

So..I'm moving out of my apartment in 2 weeks, and I'd love for all of this stuff to be GONE by then, I don't feel like making a trip and bringing it all back with me, so start shooting me offers.

Also, please keep in mind I do NOT have a completed Supercharger, I have miscellaneous pieces, so if you PM me asking me how much for a complete S/C, I won't respond.

what I DO have are the parts listed, as well as a S/C that I tried to piece together, but is still missing the following parts from the install guide:

11, 12, 16 - 20, 31, 33, 34, 44, 52, 56, 63, 84 and the rest are just the stickers.

I will let that almost completed set minus the missing parts for $800

NEW PRICES UP!!

Need this crap GONE!

is that everything i would need for a supercharger kit.... if it is ill take it how much shipped to 18951?

^^ No, it's missing NUMEROUS parts, these are just miscellaneous SC parts, I won't reply to your PM unless you want miscellaneous S/C parts

i've got everything back in la habra now, so if anyone in LA is interested in picking up, shoot me a price. I NEED money, so I'm taking all reasonable offers

Still have an oil pan??? Please PM, thanks.

Oil pan is currently pending sale, if it falls through, you'll be the first to know =]

Still interested, give me till the 27th haha

^^ fasho, where you the one that hit me up on AIM?

which bosch bpv is that? is that the 102?

how much for the trd injectors to 77449?

^^ PM'd

up please

Oil Pan, Hard oil line, CPS Wire, Radiator Hose: SOLD!

ill buy the blower w/o the pulley for $350 PM me

Bump, the main assembly has been sold

boooooooo, I may need to get the trd fuel supply line. I wish I looked & noticed you still had the radiator hose! Yarg. Let me know if you have any of the following:

Bracket, Lower Airbox
Hose, 3/16" vacuum, Bypass to Throttle Body 16" long
T fitting, 1/4 x 1/4 x 3/16 vacuum line
Hose, VSV vacuum 7mm x 12 mm x 250mm
VSV Rubber mounting bracket
Fuel Supply Line, TRD
Plastic Clamp, Fuel Supply Line 23842-28010
Spark Plugs, TRD Denso K22PR-U
71° C (160° F) Thermostat
Fitting, Hexagonal "T" Oil Feed
Bracket, AC Line Front
Bracket, AC Line Rear
Hose, Upper Engine Radiator
Wire Loom ½ " 8 inch length
Wire Loom ¾" 7 inch length
Adell Clamp, dash 12, Galv. Steel w/ rubber
Thermostat Gasket, 16325-28010

ahh! Sorry, been busy and totally forgot about this thread! lol

I'll check inventory right now and shoot you a PM

You forgot about me!? How sad! :(

I'll take;

Hose SC to Throttle Body - $40

That's this one right?
http://i6.photobucket.com/albums/y206/etli01/024209-1.jpg

Shoot me a PM.

^ PM replied

hey bro what do you have left ???

Everything that's listed on the first page is still remaining.

I also have an almost complete Supercharger that I'm looking to sell for $800

do you mean whats on the list or the pics ??? off that supercharger would you let got the pulley go ???

what's on the list, although the only pulleys I have left are the two Idler pulleys

Pm'd you!

Wes, I'm almost positive I'm gonna need the fuel supply line. =/

I still have all those parts you requested last time just chillen on the side, lol

Hey Sky-on,

I'll buy one of the fuel supply lines and a trumpet diffuser from you. Are the fuel supply lines new?

See my PM I sent you.

I already called dibs on the fuel supply line. Wes, what's the plan?

I already called dibs on the fuel supply line. Wes, what's the plan?

I think he's gonna get it to you first since you already called dibs. I think he said he was out of town ATM.

I'll just order a replacement fuel line from Toyota- PTR41-21162

I sure wouldn't want 5 feet of fury mad at me. :P

Tina called dibs on the fuel line, so that's as good as gone, lol

etli: I found the trumpet diffuser, just PM me a price that you'd think is fair

I already called dibs on the fuel supply line. Wes, what's the plan?

I think he's gonna get it to you first since you already called dibs. I think he said he was out of town ATM.

I'll just order a replacement fuel line from Toyota- PTR41-21162

I sure wouldn't want 5 feet of fury mad at me. :P

Sorry. :(

Don't worry, I honestly think you're too nice, & too insightful to ever unleash the 5 feet of fury on you. :)

oh snap i was wanting that carbon filter spacer thing...

^^ the trumpet or the filter? can you get a picture of it, or identify it on the list

its that thin black frame with the white filter element that sits in between the bottom airbox half/filter and the top airbox half

oh! yea I've got one more, shoot me a PM and we'll work something out

how much for tamper proof cap and pulley bolt with washer? p.m please

unfortunately, I don't have either of those parts remaining

pmed

only a few parts remaining, updated on pg 1

I just found a bypass valve downstairs, I know some of you guys hit me up for it, so shoot me PM if you're still interested

Update on page 1!!!

bump, shoot me offers, I need these parts gone!

bizump. totally forgot you had still had this stuff up fs..

bump! I think I have a tamper proof cap lying around somewhere, if anyone wants it, i'll go search for it, BUMP!

I just want this stuff gone, someone shoot me a price

[quote=sky-on;3351916]bump! I think I have a tamper proof cap lying around somewhere, if anyone wants it, i'll go search for it, BUMP!

I just want this stuff gone, someone shoot me a price[/quote

im looking for a tamper proof cap and bolt shoot my a price

Airbox Hose "Tuba" and Bypass Hose pending, everything else is still here for the picking!

how much for cap and if you also have pulley bolt

^ you has pm

BUMP!

Still have the air filters? I only need one, If so how much shipped to 23454.