sorry if this has been covered b4....

what offset am i looking for new wheels on my xb...i get all sorts of confused with the offset stuff. the higher the offset the more it sticks out or is the other way? and i was lookin at the rota actions on machiii.net and it shows on the site that they have them in the 4x100 pattern but the offsets they have them in is +35 and +48. would it be alright with either of those? and i do plan on lowering my xb as well. was lookin at a 2" drop. any info would be greatly appreciated. thanks guys

mike

"+" offsets brings the center line of the wheel inboard. "-" offsets bring the center line of the wheel outboard.

Between +35 and +48, you'll only want the +35 in that wheel. +48 will rub, let alone prolly might not fit.

"+" offsets brings the center line of the wheel inboard. "-" offsets bring the center line of the wheel outboard.

Between +35 and +48, you'll only want the +35 in that wheel. +48 will rub, let alone prolly might not fit.

so correct me if i am wrong...the +48 offset will stick out of the fender more then? and if i am correct if i get the 35 offset, will i need some sort of spacer then? thanks

mike

ps..sorry im so stupid in this dept. :oops:

don't worry man you're not alone. i got confused too.
the +35 will stick out more.

+48 will bring the wheel more into the fender, not out, than +35.

Justb take my word and go w/ the +35 offset wheel.

don't worry man you're not alone. i got confused too.
the +35 will stick out more.

thank u guys for the info...i hate lookin for wheels cuz the offset always throws me off. but again thank u for clearing it up for me.

mike

http://toy4two.home.mindspring.com/offset.html

the lower the number the wheel stick out towards the fender