I wanted to bring out my rear wheels out so it looks more flush with the fender.
Anyone know where to get these for a good price? I am in the South Bay Torrance area.

thanks

here is a pic. My wheels are 40 offset and the rear sits more inside the wheelwell than the front. I also want to acheive a meaner look. 8)

I already have a 3mm spacer, but was looking for an extension type with longer bolts. Any Ideas??

http://members.cox.net/inazuma/images/wheels%20026.jpg

you can use a 5mm spacer with not to much trouble (they cost like $6 each), but that still wont bring them even with the fronts

i have 42 offset in front and 35 in rear (7mm difference) and the rears are still sunk in compared to the front. i'm going to get some 5mm spacers and i think the 12mm difference will probably get it really close.

so you'd have to run the more expensive 10 or 15mm spacers to get the rears flush, with the longer studs for saftey reasons. - check the scionlife store, they sell the h&r ones i think, which have a pretty good rep.

you can use a 5mm spacer with not to much trouble (they cost like $6 each), but that still wont bring them even with the fronts

i have 42 offset in front and 35 in rear (7mm difference) and the rears are still sunk in compared to the front. i'm going to get some 5mm spacers and i think the 12mm difference will probably get it really close.

so you'd have to run the more expensive 10 or 15mm spacers to get the rears flush, with the longer studs for saftey reasons.

Hey Besk One whats up?? thanks for the info...makes sense.
Anyone know where to get them?

hehe, i just edited my post, try the scionlife store!

hey if you guys know or see wheel adapters for this application let me know...
bolt : 4X114.3 to 4x100. trying to make my rims from my 94 accord fit on my xb. thanks for any info.

hehe, i just edited my post, try the scionlife store!

haha u r sneaky... :wink:

I did not even think about the scionlife store...thanks besk one

Now i have to figure out which one to get . :shock:

whoops! double post

extra bonus of spacers - you get more grip when you widen the track.

downside of spacers - they put more stress on the wheelbearings

If you guys need custom spacers ht me up. I already made 10mm 15mm and 25mm hubcentric spacers. I got all of them in stock.

Sherwin

If you guys need custom spacers ht me up. I already made 10mm 15mm and 25mm hubcentric spacers. I got all of them in stock.

Sherwin

strange question - but can you make a 6.3mm spacer?