My wheels finally arrived. They will be going on a green xB.

Work Euroline DH w/black centers
Front (little over 3" lip)
http://pic17.picturetrail.com/VOL845/2883460/6300971/80944814.jpg

Rear (3.75" lip)
http://pic17.picturetrail.com/VOL845/2883460/6300971/80944915.jpg

Just waiting for tires and to roll my fenders. I'll post more pics when they mounted.

I would like to say thanks to Jayson and Van from One Ton Garage. They got me all hooked up. Only took 2.5 months to get them. Well Enjoy.

Scott
Front

Good Taste! What are the widths and offsets? oh and what size tires are you planning on?

Damn those are sweet.......that'll give you that mean VIP look...what springs/coilovers u using wit those wheels??

Deng....Nice jdm rims..i like those a lot.

im glad theres actually more people running wheels that aren't readily available on ebay for 500 bucks

NICE!

im glad theres actually more people running wheels that aren't readily available on ebay for 500 bucks

agreed .....formula can u pm me price that u got then for....where are the centercaps? take pics of those too..... :D

Thats gonna look sic ... post some pics once they are on!!

damn those are phat.. im jealous. im still waiting for my wheels to get in, waiting sucks. hehhe. but yeahh, lookin good.. are you going to stretch out the rubber??

can't stop looking at them. hahah

very nice! Can't wait to see em on'.

gotta see them on the car.....

http://groups.msn.com/_Secure/0SwAwA80VhypeWdbyjLNs836O3hB9lKD3YUhEF7wTVVfcne45gnG3VH!g4Z*2OEK6YbJMT3Xl4BHpykB9d*nlcLiwyDY5!brcF9SU2YD8Xk5Z!oj2BGJElg/anim0302-1_e0.gif

Nice ..

Got rid of my old wheels and got some Work VS-XX myself.
18x 8 F and 18x8.5 R

Also have a custom set of Work Equip 15x8 with 3' lip (rear)

Nice choice of wheels..hope to see pix soon.

Big lips. Nice!

sweet 8)

Nice ..

Got rid of my old wheels and got some Work VS-XX myself.
18x 8 F and 18x8.5 R

Also have a custom set of Work Equip 15x8 with 3' lip (rear)

Nice choice of wheels..hope to see pix soon.

Dang Adrian has been hanging out w/ Nilo too long. Hey Adrian, can I borrow a set of wheels?

im glad theres actually more people running wheels that aren't readily available on ebay for 500 bucks

these wheels look nice and expensive... hahajoey, aren't you supposed to hate on these also? they are nice...

i just hate foo's who think they got 'better wheels' than
everyone, and that they're all hating cuz they can't afford
big 'balla' wheels on their 15thousand buck car.(yea that means u mr. miami)

OTG ROCKS, im glad van/jay hooked it up!

GAWD DAM . . . enough said. :shock: *wipes drool*

u always get what u pay for.
think abotu tools..
SNAPON.. VERSUS "mADE IN TAIWAIN"
i personally would love to have snap on
or craftsman everything but hell im a kid
and i can't afford jack.
so i goto those cheapy hardware stores, pick
up those "DEALS" like 10 bucks for a socket
set or 10 bucks for a wrench set..
metric of course.. BREAKS ON THE FIRST TRY!
i was ____ed off! but it hits me.. i get what i pay for,.
kinda ironic how 1 snap on wrench costs more than
my entire set. HRE is GOOD GOOD GOOD ____.
whereas the posers aren't.
i even got boxed wrenchs were u can rock them
abck and forth with that socket clicking action..
mine fell apart..
thats just one example of how u get what u pay for.

im not saying copied rims will fall apart.
but im sure u lose out on things like
WEIGHT(extra weight on fake ones)...
INTEGRITY(the originals might be more strong).
and the name/color/finish.
goodluck to those who are lucky enuff to afford
the REAL deals.. and goodluck to us poor folks!

im flattered u would look through all my posts to find that.
*blushing*
now quit the gayness, u got called on your conceitedness
for bragging about how your wheels cost 'SO much'

Pretty deep offsets. Looks like +22 or +20. Good rims. I ain't feelin the dish style rims, but they are nice. Like someone asked , r u going to stretch the tires?

I will have to stretch tire on these, probably going to run 215/40. I have to do some test fitting after I roll the fenders to determine the exact look I am going for.

These wheels are +20 offset all around. They should fit pretty good. Not too crazy, this is my daily pimper! =)

How wide are they ?? JDMP

JDM thumbs up

18x8 and 18x9

18x8 and 18x9

DAYMN...love the lips bro...excellent choice of a wheel haven't seen ones like those before :clap:

You can't go wrong with One Ton Garage! Van is the man who can get you just about anything you want for your car. My next set of wheels (who knows when...) will also be purchased through him.

Great purchase, post up them pics when you get them mounted on your car!

I will have to stretch tire on these, probably going to run 215/40. I have to do some test fitting after I roll the fenders to determine the exact look I am going for.

These wheels are +20 offset all around. They should fit pretty good. Not too crazy, this is my daily pimper! =)

I have 18x8 +25 on the front and 18x8.5 +20 on the rear and had to do some rollin and stretchin and fender mods on the front my arms are still hurtin :wink: It really depends how much of a drop you have on the suspension...

I recommend the Nitto Neo Gens for tires nice and quiet... 205/40/ZR18 and 215/40ZR18 should be under $600 mounted and balanced.

I can't waiit to see what those 18x9 look like on the rear.

Toy xbox
PostPosted: Thu Jan 20, 2005 4:23 pm
I recommend the Nitto Neo Gens for tires nice and quiet... 205/40/ZR18 and 215/40ZR18


Good call. Toy xbox. I would recommend the same tire setup also if you want that stretched look. I am running 215/40 all around on 17x8 with the same nitto tires and they are not very stretched . I am most likely going to run 205/40 when I buy new tires next time. Yep when i get my second set of rims I am definitely ordering from Van.

18x8 and 18x9

Thanks for the info, JDMP

Thanks for the suggestions guys. I am running the Tanabe S-OCII coils, so it depends on how low I end up setting them once the wheels are on.

I have heard mix things about the Neo Gen's. Some like them, some hate them. You guys have good luck with them?

I was thinking of running the Dunlop FM901, but I am not 100% yet. I will do some test fitting this weekend hopefully. But I'll take some pictures of them on the car while test fitting.

Thanks again...stay tunned...

On another post, there weren't too many peeps happy w/ the NeoGens, but I'm perfectly happy with them, and should I ever got o18s, I'm going w/ NeoGens too.

i know a few people running dunlop fm901s. the stretch on those are sweet.

Finally got a chace to test fit these wheels on the car. They fit super flush all around. The front should clear fine with a little fender roll, the back will need some major fender roll and also some camber. Check out the pictures below:

Rear:
http://pic17.picturetrail.com/VOL845/2883460/6675900/86012310.jpg

http://pic17.picturetrail.com/VOL845/2883460/6675900/86012300.jpg

http://pic17.picturetrail.com/VOL845/2883460/6675900/86012281.jpg

http://pic17.picturetrail.com/VOL845/2883460/6675900/86012267.jpg

Front:
http://pic17.picturetrail.com/VOL845/2883460/6675900/86012260.jpg

http://pic17.picturetrail.com/VOL845/2883460/6675900/86012235.jpg

http://pic17.picturetrail.com/VOL845/2883460/6675900/86012254.jpg

holy moses. :thatsalottafenderrollin:.

Those are my new favorite wheels right now.

I will never buy high $$ wheels because my tastes change too fast for my wallet to recover even with cheaper stuff :)

We can't wait to see them mounted and tucked up in there.

looks pretty good, i knew that we had to roll the front a little bit, and the back majorly. hope everything turns out well. good luck with everything, and let me know how it turns out.

Come on ... Stop teasing and get thoes bad boys on!

those are dope. lookin to get some work equip 03's or some ssr reverse mesh myself. go jdm!!!!

heres some works on my homies car 19x8.5F 19x9.5R +12offset

http://autofashionusa.com/Pictures/rear.jpg

http://autofashionusa.com/Pictures/camber1.jpg

http://autofashionusa.com/Pictures/rightside.jpg

its plus +18 u flake.

my bad flake! :bow:

heres some works on my homies car 19x8.5F 19x9.5R +12offset

http://autofashionusa.com/Pictures/rear.jpg

http://autofashionusa.com/Pictures/camber1.jpg

http://autofashionusa.com/Pictures/rightside.jpg

Wow, if only other xAs looked half as nice as this one!

my bad flake! :bow:

dude ur name is flake not mine...u need some head n shoulders for that FLAKE?

you two stop flaking around!

but those are nice wheels and that xA!

HOTTTTTTTTTTTTT - the xB is gonna look sooo sick, I love Works and the black centers look awesome - widths are perfect! Nothing sicker than stretched tire with wheel lip almost kissing the fender :love:

That xA looks amazing! I'm not normally a fan of the xA even, but the stance on that one's muy perfecto

.....yo formula...if you decide to sell them....i am local and i will pick them right up ....HEHEHE..... :bow: