This is what I have from when I took off my coilovers today. The link is below to the website. Used for lowered cars. Only used for 10k miles. 120 shipped OBO.
http://www.spcperformance.com/PROD_DIR/SPCPerf_PROD_SEARCH_DYN.cfm?cmd=Cam&cmd2=67485&cmd3=

This fixed change arm is ideal for correcting excessive negative camber issues seen in lowered Scion tC's. The Scion tC comes from the factory with a cam bolt that provides +/- 1.25 deg. This factory change is not enough for lowered vehicles. By increasing the length of the rear upper control arm SPC Performance adds 2 deg. positive camber to the rear suspension that can then be dialed in with the OEM cam bolt.

Rear Adjustment range: (Includes the camber adjustment built-in from the factory) Camber -3.25 degree to +3.25 degree
Installation time: .5 hr/side
Required: 1 per wheel
Applications
Scion: 2005 & Up tC

I believe SPC sells them for 99.95 an arm.

um... the stock camber adjustments can do A LOT more then +/- 1.25 degrees i was able to bring my -3 camber to -.5 and back to -2.5

The statement after the website address is from the website. I know nothing about camber or whatever.

Bump

bump

wait so this thing adds camber? it looks like a fixed arm so it's not adjustable...

"By increasing the length of the rear upper control arm SPC Performance adds 2 deg. positive camber to the rear suspension that can then be dialed in with the OEM cam bolt."

shat... i need some less camber.. bump for you

still for sale.

bump

still for sale.

i have these and were great bringing my camber back up to spec!

bump

Still for sale

still for sale.

Bump

still for sale bump

bump

still available bro? pm me if so.

still for sale or trade for low mile h-tech or trd springs.

bump

bump still for sale.

bump

bump