I'm just wondering around how much WHP i have? My mods aren't much but just wondering thanks...5 speed manual transmission by the way.
Mods Include
-TRD Exhaust
-TRD CAI
-NST Crank Pulley, OEM size
-Royal Purple Synthetic Engine and Transmission fluid, don't know if this makes a difference or not.
Tom11x
08-07-2009, 07:37 AM
gains are very little
SquallLHeart
08-07-2009, 07:59 AM
hm.. 164?
GammaTNT
08-07-2009, 08:13 AM
153?
yirichie
08-07-2009, 08:15 AM
159?
XD40tC
08-07-2009, 10:41 AM
Im gonna go with like 155 tops on a Dyno Dynamics. Maybe less.
ChrisLilja
08-07-2009, 12:43 PM
-Royal Purple Synthetic Engine and Transmission fluid, don't know if this makes a difference or not.
That alone probably adds AT LEAST 15.....:rofl:
wlfpck
08-07-2009, 12:46 PM
hm.. 164?
I doubt 164 at the wheels. Maybe at the crank.
I'm going to go with about 150-155 whp.
jct
08-07-2009, 01:00 PM
2 more over the stock numbers
rosedaleny806
08-07-2009, 01:03 PM
possibly next to nothing. stock 5spd dynos at 143/145 so maybe 150/152 if that, if ur lucky
rosedaleny806
08-07-2009, 01:11 PM
idk not even lol probably like 148/150 if that and that's a big IF, sum1 on another theread dynod 157whp 157tq and he had a megan header, NST pulleyt set, Greddy Evo2, Injen cai. and sum other stuff
CarbonXe
08-07-2009, 01:13 PM
145-148.
mospeedtc
08-07-2009, 01:32 PM
200WHP :roll:
really prolly 148-152....
BlackKnight
08-07-2009, 02:31 PM
Only way to know is dyno!
SquallLHeart
08-07-2009, 05:27 PM
$1 Bob.
ecko04
08-07-2009, 05:34 PM
140whp max on a Mustang Dyno
BlackKnight
08-07-2009, 05:35 PM
145-148.
X2!
dave2610
08-07-2009, 05:41 PM
probably right around stock numbers
gilbert9606
08-07-2009, 06:51 PM
What about me...estimated HP?
Injen Ram air intake
Weapon R header
Tsudo exhaust
TheFantasticG
08-07-2009, 06:55 PM
Mr. OP, I'd say 155whp -/+2whp, 145wtq -/+5wtq
Go get three dyno pulls.
CarbonXe
08-07-2009, 06:55 PM
What about me...estimated HP?
Injen Ram air intake
Weapon R header
Tsudo exhaust
~154-158 and a horrible sounding car.
MeatRocket
08-07-2009, 06:58 PM
06 tc
injen cai
dc header(no s lol)
greddy sp2 axle back exhaust
and royal purple oil.
after spending so much money on all those bolt-on parts, you don't have the money to go and get a decent dyno pull?i think at the nearest shop in my area it is 80 dollars. all you're going to get here is speculation, which is worthless. go to a shop, hop on the dyno and find out.
elcapetan
08-09-2009, 06:09 AM
144.55 whp
highvoltage1
08-09-2009, 02:55 PM
How about you go do a dyno pull and PM me with the results and I will unlock this thread so you can post them for reals Yo!