View Full Version : fiberglass subwoofer enclosure 10''


mmeregildo
09-16-2009, 05:28 PM
i am planning on letting my sys go everything but the head unit well part out in pairs

http://i243.photobucket.com/albums/ff183/mmeregildo/DSC_1936.jpg (http://i243.photobucket.com/albums/ff183/mmeregildo/DSC_1936.jpg)

http://i243.photobucket.com/albums/ff183/mmeregildo/DSC_1938.jpg (http://i243.photobucket.com/albums/ff183/mmeregildo/DSC_1938.jpg)

http://i243.photobucket.com/albums/ff183/mmeregildo/IMG00013.jpg (http://i243.photobucket.com/albums/ff183/mmeregildo/IMG00013.jpg)

sciontC
09-17-2009, 06:27 PM
Specs and price? Subs coming with the enclosures? This is how I roughly want my set up to look like when I do it.

CSUnited14
09-19-2009, 03:33 AM
How much for the ex\enclosures alone

Chrisb319
09-19-2009, 04:49 AM
where are you located?

mmeregildo
09-27-2009, 08:01 PM
i am in orlando fl

mmeregildo
09-27-2009, 08:02 PM
i take offers on everything i had this custom made

mmeregildo
09-27-2009, 08:03 PM
subs
Watts MAX. Music Power 800 Watts Watts Nominal Power Handling 200 Watts Frequency Response 20 Hz ~ 144 Hz Sensitivity 89 dB Ohm Rating 4 Dimensions 10-9/10 in x 3-6-10 in (278mm x 92mm) Mounting Depth 3-1/10 in (78mm )


amps
SPECIFICATIONS

CEA-2006 Power Ratings

CEA-2006 Power Rating: (4 I? @14.4V Ƈ% THD+N, S/N: 75dBA, ref:1W into 4 I?) 300W x 1

RMS Power Ratings

Per channel into 4 Ohms: (@ 14.4V Ƈ%THD+N, 20Hz - 200Hz) 300W x 1
Per channel into 2 Ohms: (@ 14.4V Ƈ%THD+N, 20Hz - 200Hz) 500W x 1

Sound Tuning

Crossover: 50Hz-200Hz, -24dB/oct. (Low-Pass)
EQ (Equalizer): Bass EQ (Fixed Frequency): 50Hz 0 to +12dB
Subsonic Filter: 15Hz (Fixed), -24dB/oct.

Dimensions

Foot Print (WxHxD) mm: 270mm x 60mm x 242mm
Foot Print (WxHxD) in: 10-5/8'' x 2-23/64'' x 9-33/64''
Heat Sink (WxHxD) mm: 210mm x 60mm x 242mm
Heat Sink (WxHxD) in: 8-17/64'' x 2-23/64'' x 9-33/64''

General

Power Requirements: 14.4V DC (11V to 16V)
Input Sensitivity: 0.2 - 4.0V
Frequency Response: 20 -200Hz (200Hz/-3dB)
Speaker Impedance: 4 or 2 I?
Signal to Noise: 100dBA

FREEradical
09-28-2009, 07:37 AM
How much for one of those sub enclosures? I only need one, the side it's on doesn't really matter? How bout 100 bucks, shipped?

mmeregildo
09-28-2009, 02:49 PM
How much for one of those sub enclosures? I only need one, the side it's on doesn't really matter? How bout 100 bucks, shipped?
not trying to just one part when need to buy the pair

thegame7a
09-28-2009, 09:02 PM
PM sent

sundown
10-02-2009, 03:35 AM
PM sent!