Thought I would post up and see if any one would be interested in getting a custom nitrous kit for their tc. When I made mine I got a general application kit. Bought some extra parts. all said and done it was around 250$. ( I got a very good deal on a used kit) Now if anyone is interested in getting one for their tc cheap and good quality. LMK. I can get 10lb or 15lb bottles and have access to the parts to make them. and make it a easy install.

This would include fuel lines and a tap for stock fuel line. clamps hoses fuel and nitrous solenoid. bottle fogger and what ever size jets you want.

will also include wires and switches. on/off and WOT

I am doing this to help out the scion community. I know when I wanted a nitrous kit I didn't want to spend over 600 just for a kit. The prices I hope depending on what you want should be around 300 -400 including shipping.

If you are interested PM and I will look up prizes for ALL of the parts needed and the parts that you also want in with the kit.

If I get enough interest I might make a few and have them at my house ready to ship... this would also make it cheaper because I can buy the parts in mass quantities that I would need.

your running a 13.7? What shot?

hey c'mon now it was ____ty driving and I was spinning.....
75 shot.

here's the timeslip if you don't believe me.




http://viewmorepics.myspace.com/index.cfm?fuseaction=viewImage&friendID=109968799&albumID=2043772&imageID=39657304


I am "GREY" this was vs a WRX at 22 psi.

Dang bro I'm interested in a ZEX nitrous kit and your 13.7 was a respectable time in my opinion, wasn't hating on you and never said I didn't believe you, chill......

this would be neat for others but honeslty the tap in the fuel line isnt a great idea for the long run, i had mine like that and after a trip to the beach i smelled fuel the next morning and saw a leak.....i then decided to drill and tap the end of the factory fuel rail put a fitting on it and run the -3an hoes to the fuel selonoid

Dang bro I'm interested in a ZEX nitrous kit and your 13.7 was a respectable time in my opinion, wasn't hating on you and never said I didn't believe you, chill......


well honestly that run blew dick.... My fastest 60 ft has been 1.8 but then I missed 2nd and to make sure I didn't blow ____ up I turned the car off and coasted. because I was spraying and then hit rev limiter like ____ing mad.... I want to do better those were with drag radials and I spin until 60 mph. on street tires my best 1/8 mile ET is 9.1 and thats with crazy wheel hop.... I want traction bars :/

this would be neat for others but honeslty the tap in the fuel line isnt a great idea for the long run, i had mine like that and after a trip to the beach i smelled fuel the next morning and saw a leak.....i then decided to drill and tap the end of the factory fuel rail put a fitting on it and run the -3an hoes to the fuel selonoid


I have had no problems.... I'll post pics.... but I basically cut out the entire fuel line and replaced it with my own. used the connectors and put 300 psi fuel injection line. no leaks ftw.

I have had no problems.... I'll post pics.... but I basically cut out the entire fuel line and replaced it with my own. used the connectors and put 300 psi fuel injection line. no leaks ftw.

lol yea i did the same and for some reasons still leaked oh well if yours isnt leaking than more power to ya

I miss nitrous :(

Id definitely be interested in a kit for my xB2! Im sure it wouldnt be too difficult to make it work? Everythings probably the same.

I miss nitrous :(

Id definitely be interested in a kit for my xB2! Im sure it wouldnt be too difficult to make it work? Everythings probably the same.


we have the same motor so everything would be the same.

I'm going to go out and take pics of my setup now.

here is the fuel line that I replaced and tapped.

http://i127.photobucket.com/albums/p151/elcapetan67/DSCN0604.jpg

into fuel regulator

http://i127.photobucket.com/albums/p151/elcapetan67/DSCN0605.jpg

lines into fuel and nitrous solenoid.
http://i127.photobucket.com/albums/p151/elcapetan67/DSCN0606.jpg

full view of solenoids and fogger.

http://i127.photobucket.com/albums/p151/elcapetan67/DSCN0607.jpg

solenoids mounted on bracket.
http://i127.photobucket.com/albums/p151/elcapetan67/DSCN0608.jpg

fogger in the intake. had a guy TIG weld and then tap it for me so it looks clean and don't have to worry about the fogger breaking the intake.




http://i127.photobucket.com/albums/p151/elcapetan67/DSCN0610.jpg

http://i127.photobucket.com/albums/p151/elcapetan67/DSCN0609.jpg

everything

http://i127.photobucket.com/albums/p151/elcapetan67/DSCN0611.jpg

I mounted the bottle here. I took the rubber pieces and I put 3 under the side closest to the top when I use it so the tap goes to the bottom. When not at the track I take 2 out and it sits perfect with the cover. When the cover is over it you cant tell the difference.

bump.... If I get enough people interested I will get enough parts to make at least 10.

bump... If I get enough interest I am going to get a business license and the permits so I can get parts wholesale and sell these at an even lower price.

If anyone is interested add your name to this list

1.
2.
3.
4.
5.
6.
7.
8.
9.