has anyone seen or have this trunk lip
Thread Starter
Member
Joined: Nov 2004
Posts: 36
has anyone seen or have this trunk lip
i was surfin ebay and found this lip, i almost bought it on the spot cause its only $60, but then i relized it doesnt come painted 
but it looks like a nice touch, and is way cheaper than the factory one. Opinions?
heres the url http://cgi.ebay.com/ebaymotors/ws/eB...category=33638
but it looks like a nice touch, and is way cheaper than the factory one. Opinions?
heres the url http://cgi.ebay.com/ebaymotors/ws/eB...category=33638
Senior Member
SL Member
Joined: Nov 2004
Posts: 1,787
From: Lake Forest, CA
You could also buy an adhesive insulating strip from Home Depot and just slap that on the trunk of your car.
On the subject, you could also cut and glue a couple of spatulas to your front bumper.... BAM! Instand Canards!
On the subject, you could also cut and glue a couple of spatulas to your front bumper.... BAM! Instand Canards!
Banned
SL Member
Joined: Nov 2004
Posts: 261
From: The Internet
Originally Posted by Kreativeimport
those spoilers are universal and sold on ebay. made of urethane they will curve and you trim it to fit the vehicle before you paint. very popular with bmw and audi
Senior Member
SL Member
Joined: Dec 2004
Posts: 1,274
From: Boston, Mass
Originally Posted by Somnambulated
You could also buy an adhesive insulating strip from Home Depot and just slap that on the trunk of your car.
On the subject, you could also cut and glue a couple of spatulas to your front bumper.... BAM! Instand Canards!
On the subject, you could also cut and glue a couple of spatulas to your front bumper.... BAM! Instand Canards!
Senior Member
SL Member
Joined: Dec 2004
Posts: 133
From: Dillon, SC
I like this one better... seriously
http://photobucket.com/albums/v217/n...nt=spoiler.jpg
Lots of that misterious down force, the one everybody is talking about but that nobody has actually measured neither have an idea if it works for real or not.
http://photobucket.com/albums/v217/n...nt=spoiler.jpg
Lots of that misterious down force, the one everybody is talking about but that nobody has actually measured neither have an idea if it works for real or not.
Senior Member
SL Member
Joined: Aug 2004
Posts: 852
From: Scottsdale, AZ
I tried to put one of those on and had no luck, here's the deal with them:
- They are cut and curved to fit specific cars, it is not one universal size.
- You cannot bend them, they are solid cored and about 1.5" wide, 3/4" tall. If you really wanted to try you might have luck given you have an oven large enough to fit it, which most people don't.
- I tried a couple months ago using one for a '04 corolla as they didn't make one for a TC yet. In short the length was fine but the curve was off by about 2" on either end.
Quality seems fine, a little sanding before painting. But unless this is actually made and fitted for a tc I wouldn't bother trying.
just my experience.
- They are cut and curved to fit specific cars, it is not one universal size.
- You cannot bend them, they are solid cored and about 1.5" wide, 3/4" tall. If you really wanted to try you might have luck given you have an oven large enough to fit it, which most people don't.
- I tried a couple months ago using one for a '04 corolla as they didn't make one for a TC yet. In short the length was fine but the curve was off by about 2" on either end.
Quality seems fine, a little sanding before painting. But unless this is actually made and fitted for a tc I wouldn't bother trying.
just my experience.
Thread
Thread Starter
Forum
Replies
Last Post
Scionxa180
Scion xA Aero & Exterior
0
Sep 24, 2015 10:58 PM
domincnTC
PPC: Vehicles
0
Aug 4, 2015 01:47 PM