Emotion Xd-9
Thread Starter
Joined: Dec 2007
Posts: 114
From: Garden Grove, CA
Hey guys I just bought these emotion XD-9 from a members on this forum yesterday. He showed me a pictures with the rims on his car. However when i try putting it on my car it wouldn't go in flush. The problem I had was that the rims wouldnt go through the center bore of the car. Do i need spacers or something? if so what size? I have 08 TC.
Can you guys help me get this problem solve?
Can you guys help me get this problem solve?
yeah im assuming if the center bore of the wheel is too small compared to the center bore on your hub, jsut get a spacer thick enough to cover that bore and you should be okay.
im guessing atleast a 5mm?
im guessing atleast a 5mm?
Thread Starter
Joined: Dec 2007
Posts: 114
From: Garden Grove, CA
I'm hoping to get the spacer that would cover but what about the centerbore of the spacer? wouldnt that be the problem again? Unless they made the input of the center bore is my stock size and the output is same size as the rims. I went and ask around, some guy said I have to bore out the center of my rims to make it fit with the hub. I dont know where to find someone that would do that or it would be safe to do it at all.
Thread Starter
Joined: Dec 2007
Posts: 114
From: Garden Grove, CA
Oh and I dont want to run on lug ecentric spacer cuz i know it's unsafe. My mechanic said that it's safer to run on hub ecentric spacer. Is there any spacer that would give out smaller diameter in hub size but would still fit the stock which is bigger?
Thread Starter
Joined: Dec 2007
Posts: 114
From: Garden Grove, CA
Ok, I did some more research. I found out that the center bore for TC should be 54.1mm. I measure that with my emotion rims and the center bore size for it is around 54mm. I measured the center bore of my TC and it's not 54.1 mm. I will post pics asap when i take pictures to show u guys. but for now, does anyone know why my TC center bore is different of others?
Ok, I did some more research. I found out that the center bore for TC should be 54.1mm. I measure that with my emotion rims and the center bore size for it is around 54mm. I measured the center bore of my TC and it's not 54.1 mm. I will post pics asap when i take pictures to show u guys. but for now, does anyone know why my TC center bore is different of others?
What the efff??? this is weird... Ill be cheking this out :/
Thread
Thread Starter
Forum
Replies
Last Post






