I need a little help with tuner lug nuts. Anyone know what size lug nuts to get or where to get them? The wheels I'm trying to mount are O.Z. F1 Cups. I know they are the right hole pattern and offset, I'm just unsure what size/type of lug nuts to buy. Thanks all.

I need a little help with tuner lug nuts. Anyone know what size lug nuts to get ... I'm just unsure what size/type of lug nuts to buy.
The following thread lists the size to be: M12x1.5

Scion Life Forums Forum Index -> Tread and Butter
FAQ: Wheel Fitment - ** Post Your Wheel/Tire Info Here**

http://www.scionlife.com/forums/viewtopic.php?t=348

MISC INFORMATION
Scion xA and Scion xB Specifications:

Bolt Pattern
4x100

Center Bore
54.1mm

Nut Size
M12x1.5

Stock Wheels/Tires
15"x5.5" +38 offset / 195/60-15
37 lbs per set
Alloy wheel: 16.7 lbs
RPM

Be sure the lug nut is designed to fit the wheel type. Most are acorn but if the seat in the wheel is different you might have to get a different lug nut. check with where you are buying the wheels

Be sure the lug nut is designed to fit the wheel type. Most are acorn but if the seat in the wheel is different you might have to get a different lug nut. check with where you are buying the wheels

Huh? I thought most aftermarket wheels were tapered, and not acorned? I do agree that you should double check though.

Also you only usually _need_ tuner style lugs if the holes in the wheel aren't large enough to fit a regular lugnut.