http://i23.photobucket.com/albums/b364/RMS2K05/Scion_xB/Valvesetup.jpg

Wired
http://i23.photobucket.com/albums/b364/RMS2K05/Scion_xB/valveswired.jpg

http://i23.photobucket.com/albums/b364/RMS2K05/Scion_xB/rmsgen2xb.jpg

Shorter shocks for the rear installed.
http://i23.photobucket.com/albums/b364/RMS2K05/Scion_xB/rmsgen2xb_2-1-1.jpg

The fronts are Randodes AirStunner struts. When the new struts come in it will be AirStunner Extremes!!!!!!!!!

Looks good with the wheels

what rear shocks did you use?

dayum. props.

what rear shocks did you use?
2000 Sienna KYB GR-2. Just had to make some spacers for the lower mounts.

i may have to look into that...

You guys are sandbagging it... It can go lower. :tap:


:wink:

Damn what is that kit and how many valves do you have and why so many LOL!!! But looks nice.

Damn what is that kit and how many valves do you have and why so many LOL!!! But looks nice.
1 dump and 1 fill for each bag, so 8 valves.
All parts from Randode.com, installed by Randode himself!! http://www.scionapocalypse.com/phpBB3/images/smilies/icon_super.gif

Damn what is that kit and how many valves do you have and why so many LOL!!! But looks nice.
With your particular kit, you got a valve manifold. It still has all the valves needed, just plumbed into a billet aluminum block. Only difference is ease of installation.

I know that but I never seen that many valves LOL!!!

You guys are sandbagging it... It can go lower. :tap:
:wink:

i agree . . .

Install is nice and clean. Where is the tank?

Front should be down more, shouldnt it?

Install is nice and clean. Where is the tank?

Front should be down more, shouldnt it?
It will be lower, we are working on something. ;)
Removed the spare tire and the tank is below the deck inside.

More pics tomorrow

http://i23.photobucket.com/albums/b364/RMS2K05/Scion_xB/gotta-inch.jpg

More pics Bob please. I need to see this in person. Great job
Thanks, RetroXb

OK, here it is AirStunner Extreme by Randode for the Gen2 Scion xB

http://i23.photobucket.com/albums/b364/RMS2K05/Scion_xB/AirStunnerExtreme.jpg



http://i23.photobucket.com/albums/b364/RMS2K05/Scion_xB/RMS-xB2-AirStunnerExtreme-2.jpg
http://i23.photobucket.com/albums/b364/RMS2K05/Scion_xB/RMS-xB2-AirStunnerExtreme-s.jpg
http://i23.photobucket.com/albums/b364/RMS2K05/Scion_xB/RMS-xB2-AirStunnerExtreme.jpg

What size rims are those just wondering?

What size rims are those just wondering?
They're Lexus IS350 wheels:
front = 18x8 +45 offset
rear = 18x8.5 +50 offset

They're Lexus IS350 wheels:
front = 18x8 +45 offset
rear = 18x8.5 +50 offset
Correct. I did have to replace the 255R40's to 235R40's in the rear.

more pics
http://i23.photobucket.com/albums/b364/RMS2K05/Scion_xB/5-1-10_1.jpg
http://i23.photobucket.com/albums/b364/RMS2K05/Scion_xB/5-1-10_2.jpg
http://i23.photobucket.com/albums/b364/RMS2K05/Scion_xB/AirStunnerExtreme-side.jpg

I can't wait to get mine. It's killing me..lol

http://i23.photobucket.com/albums/b364/RMS2K05/Scion_xB/SweetSpot.jpg

I love this Dakota Digital gauge. Ray turned me on to it. Thanks mang!!

I knew Randy did a killer job on the install. For example, in the morning when I got in my car I would turn the air system on but the compressor wouldn't turn on. I didn't lose enough pressure over night for the compressor to turn on. Since I didn't have gauges I didn't know if I lost a little or nothing.

So now that I have my gauge I checked pressure in the morning and I didn't lose 1 psi.

If you are in AZ and are considering air, you need to have Randode do the install.
If you are out of state, make the trip. Trust me you won't be sorry.

these struts are also available with a more affordable KYB cartridge for those who don't need the adjustable dampening.

More pictures of the shock and spacer set up from the Sienna please, thank you! :icon_mrgreen:

More pictures of the shock and spacer set up from the Sienna please, thank you! :icon_mrgreen:
^^X2

Wow that looks amazing I have only seen it on online pics but to see a member ride on airride its pretty cool- now even that out and throw us a clip of it in action man!!
mad props to you!!!

Thanks guys.

Jay, I have something in the works. :icon_biggrin:

http://i23.photobucket.com/albums/b364/RMS2K05/Scion_xB/rms-gen2-xb_4.jpg

More pictures of the shock and spacer set up from the Sienna please, thank you! :icon_mrgreen:


These spacer bushings will be available on Randode.com soon.
http://i23.photobucket.com/albums/b364/RMS2K05/parts/Shockspacer.jpg

damn, randode def gets the lowest with his air installs. good work, nice gauge. hows the ride?

damn, randode def gets the lowest with his air installs. good work, nice gauge. hows the ride?
The ride is awesome. I've been playing around with the dampening on the struts. My wife has a Lexus and she is very happy with the way the xB rides. I set the fronts at 68 and the rears at 28. Very smooth.

Ah hah, I thought maybe the Sienna shock needed a top mount spacer, but I see now that it's the bottom bushing that needs them. Cool, good info, thanks Bob! 8)

Pics do no justice.. This xb low as $hit in person.. Looks like a different car all together.

I cant wait for dode to build my gen 1 Airstunner Extremes.

Looks really good !!!! whats a cost for a kit like this?

Looks really good !!!! whats a cost for a kit like this?
Hit up Randy randode@randode.com

this is the Gen1 kit http://randode.com/store/product77.html
the Gen2 will be a little more. All quality items, note the 2 compressors.


(http://randode.com/store/product77.html)

damn 2k. fuuuuu if it was cheaper i'd bag my xb. but also i would need some where to put the compressor since i use my spare tire and hide my tools under the false floor

damn 2k. fuuuuu if it was cheaper i'd bag my xb. but also i would need some where to put the compressor since i use my spare tire and hide my tools under the false floor
Compressors are under the deck.
http://i23.photobucket.com/albums/b364/RMS2K05/Scion_xB/valveswired.jpg

Is your exhaust just a turn down tip by the compressors?

so this set up is more expensive than the gen 1? i would so rock bags if i didnt have coilovers, i'll just stick to scraping everywhere.

Is your exhaust just a turn down tip by the compressors?
Muffler is eliminated and just a straight pipe turned down out of sight.

so this set up is more expensive than the gen 1? i would so rock bags if i didnt have coilovers, i'll just stick to scraping everywhere.
I think it's a little more. You need to contact Randode for the price.
randode@randode.com

and here's another Gen2 just completed by Randode.


Chumlee of ScionApocalypse in AZ
http://i134.photobucket.com/albums/q96/unlpat/IMG_2214.jpg

And yet another one.

Chris of Team Aftermath
http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs057.ash2/36203_1416375702479_1625205286_998858_1703165_n.jpg
(http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs057.ash2/36203_1416375702479_1625205286_998858_1703165_n.jpg)

Simply clean!
but yeah how is the ride down the highway at cruising height?

ps they won't do ____ at the other thread, we're not even that off topic.

either way.....pls do tell.

My struts are custom by Randode. They are using a Koni Sport strut cartridges made for the tC. These cartridges have adjustable dampening. I have them set on soft and I haven't tried them stiff yet. Normally air is not for performace driving but it's all about the setup.

Randode also make a more economical air strut using a non-adjustable cartridge.

I don't think then that my driving habits can support this set up. :?

Simply clean!
but yeah how is the ride down the highway at cruising height?

ps they won't do ____ at the other thread, we're not even that off topic.

either way.....pls do tell.

Going down the highway is real smooth. Even at lower speeds. The strut bags are UA and hold a pretty decent volume of air so that helps the ride.

I'm pretty low while cruising, rear tires are still tucked pretty good.
I will try and take a pic today.

And yes you are right about being off topic on the other thread. :shock:

I see. Well either way man thanks for replying; I have to get around adjusting my coils. Hopefully I can achieve comfortable height without sacrificing stance :)

how much does a set up like this run if you dont want to put the price out here pm me plz.

how much does a set up like this run if you dont want to put the price out here pm me plz.

You need to contact Randode at randode@randode.com

Finally mounted my Dakota Digital Air Gauge.

http://i23.photobucket.com/albums/b364/RMS2K05/Scion_xB/LL11.jpg

Nice work again Bob! I can't wait to get my gauges. :bow::bow:

Nice work again Bob! I can't wait to get my gauges. :bow::bow:
Thx Chris. I wish I found the time to do this earlier. I have a fixture made so I can do this mod anytime.

Thx Chris. I wish I found the time to do this earlier. I have a fixture made so I can do this mod anytime.
Rad!( Yeah I wanna bring back that word) Now I just need to get my gauges

Rad!( Yeah I wanna bring back that word) Now I just need to get my gauges
Rad Lolz

Damn all this air ride make me wanna bag my box! Haven't found a guy here in So. Cal with a good Rep.

Damn all this air ride make me wanna bag my box! Haven't found a guy here in So. Cal with a good Rep.
Make a long weekend trip out of it and bring it to AZ if you can't find anyone in Cali

Make a long weekend trip out of it and bring it to AZ if you can't find anyone in Cali
2x 6hrs away from greatness

and yet another Gen2 just completed by Randode.


Brandon G of ScionApocalypse in AZ

http://i31.tinypic.com/15ejxpi.jpg

Holy crap the bsp IA the same color I have!! Hope he returns my email soon to see what price I'm working with. Do any of u guys daily ur boxes?

Holy crap the bsp IA the same color I have!! Hope he returns my email soon to see what price I'm working with. Do any of u guys daily ur boxes?
For most of us these are daily drivers.
I did talk to him and you are looking at around $2k.
Keep in mind you get a lot for your $$
For example, not just the struts are custom but you get custom upper strut mounts with uni-balls. 2 compressors and 8 1/2" valves. All quality stuff.

Nice, is that installed or kit alone?

I think I can safely say that we all use them for daily drivers.

He makes a quality product... I opted for the EasyStreet on mine because I like the control system a lot, but i've seen the Randode setup in person and it's good stuff! You wouldn't feel any regret with the end result and you will be lower all around than the AirLift setup, plus, you can replace your bags inexpensively compared to the EasyStreet... You can't go wrong, definitely consider this kit.

any pics of the rear bag setup?

Nice, is that installed or kit alone?
Just the kit.

any pics of the rear bag setup?

Brackets
http://i28.tinypic.com/2eyjarn.jpg

UA bag
https://www.universalairsuspension.com/store/images/AH2.jpg


I'll get some pics of the install

same as my rear setup.... unless randodes are a lot shorter. My back doesnt drop as far though. even switched to the sienna shocks and the spacers for em.

ninja edit: does his brackets have a bolt for top and bottom? i dont like how mine only bolt thru the bottom.

same as my rear setup.... unless randodes are a lot shorter. My back doesnt drop as far though. even switched to the sienna shocks and the spacers for em.

ninja edit: does his brackets have a bolt for top and bottom? i dont like how mine only bolt thru the bottom.
Yes, they bolt in top and bottom. I'm guess'n the Randode brackets are shorter.

pm coming...

pm coming...

pm replied. http://i23.photobucket.com/albums/b364/RMS2K05/gifs/fist-knucks-simple.gif

Finally mounted my Dakota Digital Air Gauge.

http://i23.photobucket.com/albums/b364/RMS2K05/Scion_xB/LL11.jpg


Looks nice. Question, I can see that you moved the mirror controls but what did you do with the dimmer switch?

Looks nice. Question, I can see that you moved the mirror controls but what did you do with the dimmer switch?

I knew I forgot something. I just put it down below. Pop'd right in.

http://i23.photobucket.com/albums/b364/RMS2K05/Scion_xB/LL12.jpg

it's the summer of bags!

if anyone has any questions, please email me directly at randode@randode.com

I knew I recognized that car from somewhere. Nice look drop!8)

My only question is:

Can I have for free?

I'll rep you to the fullest in Putah, I mean Utah.

I knew I forgot something. I just put it down below. Pop'd right in.

http://i23.photobucket.com/albums/b364/RMS2K05/Scion_xB/LL12.jpg


Nice!

http://i23.photobucket.com/albums/b364/RMS2K05/Scion_xB/rmsgen2xb.jpg

dude your car looks exactly the same as mine did.

http://memimage.cardomain.com/ride_images/3/2617/1561/31540780059_large.jpg

dude your car looks exactly the same as mine did.

http://memimage.cardomain.com/ride_images/3/2617/1561/31540780059_large.jpg

YOU MY FRIEND INSPIRED ME WITH THIS PIC!! THANK YOU!
http://i23.photobucket.com/albums/b364/RMS2K05/Scion_xB/31540780058_large.jpg


http://i23.photobucket.com/albums/b364/RMS2K05/Scion_xB/RMS-xB2-AirStunnerExtreme-2.jpg

Comedy! I remember seeing that car (Maxboosts) on CarDomain and started searching CL for a used set of IS wheels, but then gave up when I saw Bob's car at the Severed Ties show... They both look great!

Comedy! I remember seeing that car (Maxboosts) on CarDomain and started searching CL for a used set of IS wheels, but then gave up when I saw Bob's car at the Severed Ties show... They both look great!
WIN!!!

Who do I pm to get more information on the Randode air suspension? Very interested right now.:ponder:
RMS, your xb is looking sick!

Heres Randodes email, posted like 5 posts before yours....

it's the summer of bags!

if anyone has any questions, please email me directly at randode@randode.com

Heres Randodes email, posted like 5 posts before yours....

Thanks Big_Jim, tried reading the whole thread. Guess i missed it.

Thanks Big_Jim, tried reading the whole thread. Guess i missed it.

I will be seeing Randode shortly, he's a little busy cutting up a Gen1 right now. :eyes:

I will let him know you are looking for some info Darren.

I will be seeing Randode shortly, he's a little busy cutting up a Gen1 right now. :eyes:

I will let him know you are looking for some info Darren.

Dang, sounds like hes all about custom fab and thanks! I really appreciate it.

Why are you running 1/2" valves? I am assuming you are running 1/2" line, the inside diameter or 1/2" line is 3/8" so you would have the same speed with 3/8" valves and 1/2" lines, plus fittings valves and airline would have been cheaper and the 3/8" valves are less prone to sticking ( in my experience ). Just curious, the xb looks nice and the install looks great. Assuming you used a pancake tank in the spare tire well?

Why are you running 1/2" valves? I am assuming you are running 1/2" line, the inside diameter or 1/2" line is 3/8" so you would have the same speed with 3/8" valves and 1/2" lines, plus fittings valves and airline would have been cheaper and the 3/8" valves are less prone to sticking ( in my experience ). Just curious, the xb looks nice and the install looks great. Assuming you used a pancake tank in the spare tire well?
I'm running 3/8 SMC's with 3/8line. The 5gal tank is inside, below deck. Yes I lost the spare but I have plans for the space left over. Excuse the wiring, I'm in between audio setups.

I also have flow control mufflers on the dumps.
http://www.mcmaster.com/catalog/116/gfx/small/9834k34p1s.gif

These not only keep the valves clean but it is easier to adjust the air pressure.

http://i23.photobucket.com/albums/b364/RMS2K05/Scion_xB/tank.jpg

I'm running 3/8 SMC's with 3/8line. The 5gal tank is inside, below deck. Yes I lost the spare but I have plans for the space left over. Excuse the wiring, I'm in between audio setups.

I also have flow control mufflers on the dumps.
http://www.mcmaster.com/catalog/116/gfx/small/9834k34p1s.gif

These not only keep the valves clean but it is easier to adjust the air pressure.

http://i23.photobucket.com/albums/b364/RMS2K05/Scion_xB/tank.jpg

What size ports on the bag? If they are 3/8", switching to 1/2" line would make that suspension MOVE. Is that the standard short stubby 5 gallon tank? It fits and you can still put the foam tray over the top? Really surprised to see a 5 gallon tank in there, I'm trying to find a spot to mount my 5 gallon SS tank for my train horns but I really don't want to ditch the spare tire

I'm trying to find a spot to mount my 5 gallon SS tank for my train horns but I really don't want to ditch the spare tire


Pick up one of the AVS 5-gal aluminium tanks.

http://www.avsontheweb.com/product.php?productid=727&cat=328&page=1

They fit under the xB2 with pleanty of clearence.

No reason to run 1/2" valves... If I were to run air on my xB, largest I'd run are 3/8" and I'd have the same dump controls as RMS.

Get rid of the spare. My spare's been gone for about 2 years. You have TPMS sensors. If a tire gets low, the light will turn on, therefore you should check your air pressures. If the tire keeps leaking, get it checked out. Spare tire is obsolete.

Spare tire is obsolete.


Not completely. I wish I'd had a spare with my last car, 06 MINI Cooper S. Car had run flats so no need for a spare, right? Unless you happen to turn a corner and hit a 1/2" bolt right on the edge of the tread. Tire went flat immediately and was undrivable so I had to get towed to the tire shop. Spare would have made it easier and less expensive to take care of.

Not completely. I wish I'd had a spare with my last car, 06 MINI Cooper S. Car had run flats so no need for a spare, right? Unless you happen to turn a corner and hit a 1/2" bolt right on the edge of the tread. Tire went flat immediately and was undrivable so I had to get towed to the tire shop. Spare would have made it easier and less expensive to take care of.
Or just not drive a MINI. :rofl:

J/k. A good female friend of my roommates' has one.

Very true. I actually have a screw about 3/4" away from the sidewall currently... Really don't look forward to purchasing a 19" tire.

Or just not drive a MINI. :rofl:


Trust me I don't. BMW made some design flaws with the 1st gen and didn't bother fixing them since they were going to change the design in 07. We sold it after just under two years and bought the xB as it's replacement.

nice clean set up!! and slams on UAS bags.. way way better than easy Street.. I can tell you guys allabout the design flaws on the easy street if yu want to know.. but not here..

Awsome job! thinking if i should redo the first bagged gen 2 XB front struts with Randodes set up.. My UAS bags havent failed on me in more than 3 years! I know they wont last forever so maybe its time for some normal maintainace for wear and tear.

randode air setup ftw

Thanks guys. I have really put these struts to the test. I love the way the UA bags ride and the Randode struts are solid. I couldn't be happier with the install also.