I have been searching for like and hour trying to find the post where the guy built an open face box for 8"s that fit under the seat. Can someone post the link his post.

Thanks!

Peace,
Mark D

 

Here is the post
https://www.scionlife.com/forums/vie...hlight=sub+box

 

Go 10s under the front seats!

 

go for 10's like brad said. i have heard his setup and it sounds great, along with his 10" in the back and ur custom kickpanels

 

i'm gonna be doing 10's soon too.. out of Carbon Fiber, if all goes as planned hehe

 

I am wanting to do 8's so I dont have to build the box as big also so then I can go to a higher wattage. Cause it seams all of the higher wattached 10's take more space.

Thanks all!

Peace,
Mark D

 

the CFT req isn't really that much greater, if the subs are quality..

 

Hi, I built some boxes for 8" subs. Let me know if I can help you

 

This post was actually started cause I was trying to find the post about your box. I have put some thought into it an I think that I may stay with a square box. I am too afraid that the sub will get a hole kicked in it.

Peace,
Mark D

 

aim the sub into the bottom of the seat then!

 

down fires alsowork great,my box is downfire 10" the box is half filled with polyfill, using my 8 year old infinity kappa,in a.45cubic foot enclosure,let me knowif you need specs for the box.Bill

 

Bill,
Specs would be great. I have not yet measured out everything. Do you have 2 under the seat or just 1. I am going to do a sub under both seats.

If you could email the specs to markdensford@yahoo.com

Thanks!

Peace,
Mark D

 

If you were me you'd put the Pioneer Premier TS-SW124D Ultra Slim 12"
sub under the front seat it only needs .06 cu. ft. of air space & has a mounting depth of 3 5/8" !!! I got it with a JL e1400 amp mounted in the storage compartment in the back. Sounds AWESOME!!!

 

DO YOU THINK I COULD SQUEEZE A solo baric l7 12" under the seat. I know they require minimal airspace.

 

AnL7 requires .73 cubic feet minimum,the most you get under a seat without it sticking out is .51 mounting deptight be an issue. Al710 would work. Bill

 

if you were to install aftermarket seats, you'd have more under-seat room ;) i have well over 1.0CFT under my seats..

 

how much clearane between the sub and the carpet.. did you factor sub excursion into this?

 

yep, 1.25 inches, you have one cubic foot extenal if I am correct, I used 1\2" stock, and effectively loss more than 1\3 of my volume, plus basket displacement.