Anyone have them or have a diy of them?

they cost $150 shipped brand new


http://articles.dashzracing.com/wp-content/uploads/2009/06/08-scion-xb-projector-headlights-4.jpg

http://www.fastscions.com/images/products/detail/2LHPXB08JMBTM.gif

http://www.topgearautosport.com/img/350/101117ZEUN.jpg

Those are good looking. Hows the beam performance at night?

Yea I like them as well, but I am thinking about just modding the stock headlights. I want to paint them black on the inside and then angel eyes. Just can't afford that price

Here's somebody else who made their own:
http://www.scionlife.com/forums/showthread.php?t=137588

And this is what you need to do it:
http://cgi.ebay.com/2x-70mm-Soft-White-Angel-Eyes-Ring-Halo-Car-light-416-/280500538343?cmd=ViewItem&pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item414f228be7

$150 aint bad, just makes me wonder how well the lights work. I always worry about aftermarket headlights, because they sometimes look great, but are not very useful at night :)

I sent those guys an email. I think Im gonna buy the ones in post 2, from spec'd tuning.

the ones in pic 3 are cold-cathode (you can see the halo ring in the day)


but the spec-d ones match perfectly with 10000k HIDs

if they fog up after a few washes or rainshowers, do not freak out. it will eventually stop fogging up (its magic)

Where can the ones in pic 3 be bought? Id like the brightest ring as possible, because I like to run them during the day.

http://cgi.ebay.com/ebaymotors/08-09-SCION-xB-BLACK-CCFL-HALO-PROJECTOR-HEADLIGHTS-_W0QQcmdZViewItemQQhashZitem48368676a5QQitemZ310152427173QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

I guess this is a better choice since its CCFL, for daytime running.

yea CCFL is more expensive, but i think its worth the extra $$$

Yeah, I just bought the ebay ones in black. $300.

pics when installed

I am more then likely going to do a customsetup on my stock headlights. Get the tubes to install angel eyes myself and while apart paint the inside black

Lights will be here Friday, along with Unichip. Know what Im doing Fri night!

Lights will be here Friday, along with Unichip. Know what Im doing Fri night!

Sick! can't wait to see both! I have been thinking about unichip for a while

Well, when I run the dyno again on the 21st, Unichip is either gonna gain some customers or lose some customers :D

haha it'll gain me as a customer when i get money for it. I need MORE POWER!

A uni chip has been in the back of my mind for a while... cant wait to find out if it works!!

does anyone know if the ccfl ones will fit the xb2011? also, what is a uni chip? still learning myself up in the mod game

It's a piggyback ecu thats plug and play. Ups the engine timing for increased tq and hp. Has two settings, one for 87 octane and one for 93 (more aggressive timing).

also, what is a uni chip?
http://www.unichip.us

does anyone know if the ccfl ones will fit the xb2011? also, what is a uni chip? still learning myself up in the mod game

I thought the 2011 headlights are a slightly different shape, so I wouldn't think so.

These are the Anzo Headlights (Pict. 3). I bought them from No Limitz.

http://www.nolimitzind.com/headlightanzo.html

Quality lights, bright, no fogging, Plug n Play (except for Halos)

http://i497.photobucket.com/albums/rr334/bikerochester/Scion%20XB/DSCN1796_2.jpg

With running lights on
http://i497.photobucket.com/albums/rr334/bikerochester/Scion%20XB/DSCN1811.jpg

With low beams and fog lights on
http://i497.photobucket.com/albums/rr334/bikerochester/Scion%20XB/DSCN1814_2.jpg

Bump!
I too am going to bake open my stock headlights to swap out the projector lense and while I'm in there I want to paint it black and add some CCFL Angel Eyes on the projector shroud.

I know that The Retrofit Source sells them between 60mm-100mm diameters in 10mm increments, but I'm curious to see if anyone has added these onto the stock projector and if so, how big a diameter gets a proper fit?
Obviously I could use my caliper to measure the diameter but I would have to bake open the headlight just to measure and then order the CCFLs. I would prefer, for my own sanity, to only have to open and close them one time. Thats why I'm researching all this info so that I'm ready with everything to do the whole project at once.

Anyways, any help on this matter is most appreciated.