**Official shift knob picture post** [Archive]

rsx_freak79

02-28-2005, 01:46 AM

Quite a bit. I was going nuts that the throws were so long before. Its nice to not have it sticking up like a pole too.
yeah, stock shifters are tall. good to know it performs better. that can save you time at the track. i bet that knob gets hella hot in the summer though. :P

xnevergiveinx

02-28-2005, 01:55 AM

http://blitzcat.home.mindspring.com/twmshift.jpg
TWM short shifter, a polished MR2 Spyder knob from Voodoo Racing

can you post a link, looks so nice, i want that knob

TurboMe

02-28-2005, 02:00 AM

blitzcat

02-28-2005, 02:09 AM

http://www.teamvoodoo.com/Voodoo/Knobs.html
http://www.teamvoodoo.com/Voodoo/Applications.html
Mine was the pearl finish, size 12 X 1.25mm(Spyder)

Lonely_Raven

02-28-2005, 02:27 AM

-Keith-

02-28-2005, 02:54 AM

most knobs have adjusment screws cuz they are universal... I have a momo knob...

verditsgerman

02-28-2005, 03:24 AM

i just ordered this for my tC

http://www.cardomain.com/item/SPA03749GR

TheKnown

02-28-2005, 03:36 AM

im liking the mr2 one

blitzcat

02-28-2005, 03:57 AM

I've been looking for a different shift knob for my xB. Anyone know what the thread
pattern is on it, so I know what I can get away with?

I love that Miata one by the way, are you sure it's polished and not brushed?
Either way it's really nice. Thanks for sharing the link.

I think all the scions have the same thread pitch for the shift knobs, but not positive. You can measure pitch by counting threads against a centimeter ruler, and cut a slot in an index card to get the rough width.

And yeah I meant to say Pearl, not polished.
" A clear powdercoated spun finish has been released at Team Voodoo headquarters and will henceforth be known as "pearl.""

HyperZ

02-28-2005, 04:01 AM

Doesn't the "spun" silver match better with the tC console's silver look?

RacerZack

02-28-2005, 06:46 AM

OMG, VoodooBob has knobs for Toyota too??? I've had a Voodoo knob on my Miata for 8 years! First a black standard and now a pearl magnum. I love the Voodoo knob. Damn, and I just ordered a new Razo knobfor the Scion....

TheKnown

02-28-2005, 06:54 AM

send that _____ back and get the knob in the pictures

smash

02-28-2005, 02:49 PM

http://photobucket.com/albums/v469/veedubgirl/Smash/IMG_0109.jpg

Lonely_Raven

02-28-2005, 03:29 PM

I spoke with Voodoo about getting the pistol grip in
polished for my xB, and he says he only has it in the ball
shifter for our cars.

I told him to keep me in mind should he change that.

maximus96

02-28-2005, 06:27 PM

how come nobody uses the flash on their camera when taking pictures?

Priory_of_Scion

02-28-2005, 07:33 PM

page 2 of my cardomain link

daewonder

03-01-2005, 05:36 AM

smash and blitzcat - looking spiffy! i think i'll be getting the twm shifter with this momo knob-

http://outmotoring.com/cgi-bin/image/templates/mo_sphere_halfbk_chrome_md.jpg

EVILDAVE

03-01-2005, 06:13 AM

.
http://img.photobucket.com/albums/v211/EVILDAVE666/Dashpicnew.jpg

smash

03-02-2005, 03:06 PM

.
http://img.photobucket.com/albums/v211/EVILDAVE666/Dashpicnew.jpg

Daaaannng bro! That ____'s hot! I especially like the multi-color accent trim.. wish they would make some stuff like that for the tC ! Fun!!

Hudnut

03-02-2005, 10:51 PM

http://memimage.cardomain.net/member_images/10/web/766000-766999/766009_17.jpg
My leather TRD knob. It's so so silky soft. I kind of miss the weighted knob though.

motozen

03-04-2005, 10:34 PM

http://blitzcat.home.mindspring.com/twmshift.jpg
TWM short shifter, a polished MR2 Spyder knob from Voodoo Racing

:clap: :clap: :clap: how heavy is it? can a magnium fit? looks great!!!

Priory_of_Scion

03-05-2005, 04:11 AM

It matches the fabric of the seats on the tC.

http://memimage.cardomain.net/member_images/4/web/784000-784999/784577_24_full.jpg

blitzcat

03-06-2005, 06:47 PM

That is the magnum/2" one. Its not too heavy since it is made of aluminum. A little lighter than the old. If you email voodoo they can tell you to the gram.

romper145

03-07-2005, 06:02 AM

anybody know if trd makes an automatic shift knob? i love the leather one but i don't really want that H diagram on top of it seeing that i have an auto.

Audicted

03-07-2005, 07:42 AM

It matches the fabric of the seats on the tC.

http://memimage.cardomain.net/member_images/4/web/784000-784999/784577_24_full.jpg

Hahah, I like the cigarrette lighter. Where did you get that?

VIP_tC

03-07-2005, 11:49 PM

blitzcat - where did you get the piece that goes between the knob and the shift boot? Thanks.

blitzcat

03-08-2005, 12:15 AM

blitzcat - where did you get the piece that goes between the knob and the shift boot? Thanks.

It comes with the car. Turn the shift boot inside out, and reverse the silver thing. If you got a twm shifter, when you put the flimsy metal ring back on, lower it down on the pleather so it wont bunch up too badly. To make the boot and silver thing sit at the right height, get a metal sleeve at the hardware store for $.15 that just fits over the shifter lever threads but not the lip. Put it on before the boot/console and knob.

That could be more clear. There is a twm shifter install thread from November/December that covers this trick, which is how I found out.

Priory_of_Scion

03-08-2005, 12:46 AM

Audicted....got it at my local circuit city. Its an Ichiban car lighter but you could probably go to their website to get one.

they have diff. colors too but this one matched the stock interior very well. IMO

Thread

03-08-2005, 04:45 AM

Mine:
http://homepage.mac.com/cvervais/.Pictures/rattle/shifter.jpg

davedavetC

02-19-2006, 09:42 AM

wow an official shift knob thread :eyebrow:

TWM_Performance

03-02-2006, 06:51 PM

Hey guys, just wanted to show you our weighted knobs!

http://www.twmshiftknobs.com/

Our knobs don't use the popular 3 set screws design, because we all know they always get loose. We use the NTIS Technology, explained here:

http://www.twmshiftknobs.com/column/index.html

Be sure to take a look at our new shift knob, the M1 Abrams:
http://www.twmshiftknobs.com/shiftknobs/m1abrams-shiftknobs.html

Also, register to our Newsletter on www.twmperformance.com and get 5% off on your next purchase!

Jean-Sebastien

ilovemytC

06-05-2006, 03:47 AM

think this would look good? i like that it matches the seats:

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=8071885756

scion_jon

06-05-2006, 04:47 AM

mine!

http://i51.photobucket.com/albums/f382/scion_jon/shifter.jpg

xnevergiveinx

06-05-2006, 04:48 AM

TWM_Performance

06-05-2006, 03:38 PM

anyone know the thread size of our knobs? i'm looking at one on ebay, but the seller doesn't know if it will fit
i'd really love to get this one, i like the look of a silverish ball that doesn't sit high. kind of like the twm m1 abrams, but not so expensive. i just don't know about the durability of this, if it will scratch to hell or not.
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1,1&item=8070204070&sspagename=STRK%3AMEWA%3AIT

The thread size of manual Scions is M12x1.25, automatics are M8x1.25.

Here are some pics of our new knobs that can be installed on both auto or manual tCs, available at TWM Shift Knobs (http://www.twmshiftknobs.com/):

http://www.twmshiftknobs.com/images/frontpage/type-r-4.gifhttp://www.twmshiftknobs.com/images/frontpage/classic-4.gifhttp://www.twmshiftknobs.com/images/frontpage/abrams-4.gifhttp://www.twmshiftknobs.com/images/frontpage/leopard-4.gif

I hope this helps,

Kevin
TWM Performance

Aracheon

06-06-2006, 06:50 AM

TWM Stage 2 with blue/black TWM shift knob.

http://www.highaltitudeimports.com/gallery/data/501/IMG_0541.jpg
http://www.highaltitudeimports.com/gallery/data/501/medium/IMG_0543.jpg

2_tC

06-07-2006, 08:41 AM

Faux Alcantara boots from RedlineGoods (sponsored sales forum) with TRD knob and B&M short shifter (no spacers so 1/2" lower than stock):

http://i18.photobucket.com/albums/b134/t_do/boot.jpg

TWM_Performance

06-07-2006, 02:29 PM

TWM Stage 2 with blue/black TWM shift knob.

http://www.highaltitudeimports.com/gallery/data/501/IMG_0541.jpg
http://www.highaltitudeimports.com/gallery/data/501/medium/IMG_0543.jpg

Nice, the gun metal classic looks great in your interior!

Kevin
TWM performance

Aracheon

06-08-2006, 04:57 PM

I wasn't real happy with it when I bought it, but that's due in part to the fact I've never not had a leather shift knob, and this is the first of the last 7 cars I've owned that I put a short shifter in.

After I had it for a week, I'm never going back. :)

Streeter

06-09-2006, 03:32 PM

Just for fun - here's mine. I just installed the TWM stage 2 yesterday. (Took about half hour)

http://imageserver1.textamerica.com/user.images.x/34/IMG_450834/_0609/T520060609065307680.jpg

http://imageserver1.textamerica.com/user.images.x/34/IMG_450834/_0609/T520060609065459145.jpg

jeremy05

06-09-2006, 06:47 PM

jus a little word of advice to everyone moddin shifters ........DONT EVER CUT THE SHIFTER SHAFT.....and i wouldn't leave out any spacers either....cutting shafts of shifters puts extra stress on the bushings inside the transmission because the distance of your hand moving is now even shorter and closer in length the the actual throw of the shaft below the boot.....a shifter is a physical lever and messing with the design will work parts too hard.....

but hey wat do i know....go do it an jus find out....

i rock a b&m shrt shftr its great and i wanted to chop it.........but i got edumacated

PandaPower

06-16-2006, 04:06 PM

Faux Alcantara boots from RedlineGoods (sponsored sales forum) with TRD knob and B&M short shifter (no spacers so 1/2" lower than stock):

http://i18.photobucket.com/albums/b134/t_do/boot.jpg

WoooooooW!!! I think I just found my new setup! :clap:

fullFXtc

06-17-2006, 06:27 AM

xnevergiveinx

06-17-2006, 04:23 PM

fullFXtc

06-17-2006, 06:06 PM

most knobs are universal!! and true you may not find the exact one your lookin for but they have alot on there !!!! and there alot cheaper

HighlanderMac

06-17-2006, 10:05 PM

http://i12.photobucket.com/albums/a232/HighlanderMac9/IMG_0328.jpg
http://i12.photobucket.com/albums/a232/HighlanderMac9/IMG_0317.jpg

semaJames

06-18-2006, 12:36 AM

http://www.myfruityfile.com/uploads_i/3601_razo.JPG (http://www.myfruityfile.com/)

tC4italy

06-18-2006, 04:56 AM

a1cusaf

06-19-2006, 06:20 AM

TWM_Performance

06-21-2006, 09:42 PM

chrischoi

06-21-2006, 09:52 PM

http://www.myfruityfile.com/uploads_i/3601_razo.JPG (http://www.myfruityfile.com/)

i hope those aren't your sunglasses. lol.

xnevergiveinx

06-21-2006, 10:22 PM

i hope those aren't your sunglasses. lol.

they remind me of spy mc shades...i really want to pick up a pair of them
http://www.streetracerparts.com/images/spy/Fashion%20Sunglasses/MC/mcbs2np_lg.jpg

chrischoi

07-05-2006, 09:08 PM

double post...

chrischoi

07-05-2006, 09:08 PM

http://img175.imageshack.us/img175/3489/ss3ng.jpg

twm stage 2 with flat black type r shift knob
i flipped the collar updside down... i am so smart... :rofl:

and did some cutting on the shift boot.

AZURETCTONY

07-09-2006, 06:46 PM

Anybody strip the plastic adapter inside their OBX shift knob? I had taken it off to install some shifter & cubby LED's and when I put it back I guess I over tightened it. :doh: Why don't they make these metal? I don't seem to see anyplace I can get a replacment adapter, any ideas?

xnevergiveinx

07-10-2006, 01:56 AM

AZURETCTONY

07-10-2006, 02:08 AM

Yes, there is metal threading in the shift knob too but there is a plastic spacer/adapter used on the inside to thread onto the shaft which is crap. :lalala:

AZURETCTONY

07-10-2006, 05:40 PM

Correct me if I’m wrong, but all 3 styles of the OBX knobs for the TC came with 2 plastic adapters, (I’m guessing one for manual one for auto), as is the case with the 2 different bases they include for different transmissions. So I'm thinking.... all of you manual TC's with OBX knobs should have the Auto adapter piece I need. Please Help Out! :pray:

xnevergiveinx

07-10-2006, 09:37 PM

heres mine. creative compacts short shifter with a monsterknob, from monsterknobs.com
i also have the obx speedstar knob, but i like this one better because it doesn't get super hot or super cold
http://i3.photobucket.com/albums/y99/dorkultra/DSCN1226.jpg

BigDon

07-10-2006, 11:42 PM

xnevergiveinx

07-11-2006, 02:20 AM

i dont know much about cars, but this seems like one upgrade that i can handle. However i do have one question, when it comes to putting the new shift knob on, do all knobs fit perfectly right down to the leather, or am i going to have to cut off part of the metal rod and re-thread it inorder to get the knob to fit right down to the leather like the stock knob?

my monster knob did not fit all the way down to the leather. it will look like a ball on a stick.
my obx speedstar knob fit perfect, because it has a metal flange that makes it fit flush to the leather. i'm pretty sure the trd leather knob will work nicely also.

please do not cut the stock shifter,
just a little word of advice to everyone moddin shifters ........DONT EVER CUT THE SHIFTER SHAFT.....and i wouldn't leave out any spacers either....cutting shafts of shifters puts extra stress on the bushings inside the transmission because the distance of your hand moving is now even shorter and closer in length the the actual throw of the shaft below the boot.....a shifter is a physical lever and messing with the design will work parts too hard.....

there is a short shifter install walkthru in the tech section that is really good. i suggest you check it out.

i007spectre

07-15-2006, 09:11 PM

I saw one like mine posted already, but oh well here it is.
http://i49.photobucket.com/albums/f279/i007spectre/shiftknob.jpg

Control_Are

07-16-2006, 02:20 AM

Razo shiftknob...

http://img.photobucket.com/albums/v498/djrefresh/DSC00920.jpg

w/ TWM Stage 2.

http://img.photobucket.com/albums/v498/djrefresh/DSC00915.jpg

Dr_Isotope

07-18-2006, 03:57 PM

Weighted delrin, with matching boot collar. Handmade out of about $10 in materials-- and four hours of labor. :P

http://img.photobucket.com/albums/v307/DrIsotope/shiftset.jpg

ih8civx

07-22-2006, 02:55 PM

who wants to see my knob?

tC4italy

07-22-2006, 04:59 PM

who wants to see my knob?

maybe i woke up on the horny side of the bed
but today all remarks i read r insinuating something
:lalala:

atodak

07-22-2006, 09:20 PM

just click to see it bigger
http://img133.imageshack.us/img133/1702/sspx0017ae6.th.png (http://img133.imageshack.us/my.php?image=sspx0017ae6.png)

D1G1T4L

07-24-2006, 10:46 PM

wow please dont tell me you guys are actually buying these things???? lol theres no way i would pay $90 for a shift knob!!!!! dont get me wrong some of them do look good but for god sakes if all you want is a piece of metel that has threads in it to screw onto your shifter then go to ebay and buy one for like $20 i was just on there the other day and the had thousands of them for a whole hell of a lot cheaper!!! do your selfs a favor and just take a look at the knobs on ebay!!!!
I got my brother a MOMO shift knob for Christmas a couple years back. The MOMOs all use a universal design, with plastic spacers that match the shaft to the bore of the knob. Set screws hold it all together.

It sucks. That plastic spacer totally ruins the feel of the shifter. It's got a noticeable wiggle to it, not the solid feel that the stock knob has. He doesn't really care, and it looks cool, but I would never buy a universal shift knob after trying his.

aznpimp

07-26-2006, 05:02 PM

heres mine , not a good pic, but oh well

http://img479.imageshack.us/img479/6646/shiftknobqi7.jpg (http://imageshack.us)

scion_jon

08-03-2006, 04:58 AM

from this
http://i51.photobucket.com/albums/f382/scion_jon/shifter.jpg
to this
http://i51.photobucket.com/albums/f382/scion_jon/shiftboot.jpg

Onikage

08-03-2006, 06:43 AM

just click to see it bigger
http://img133.imageshack.us/img133/1702/sspx0017ae6.th.png (http://img133.imageshack.us/my.php?image=sspx0017ae6.png)

What knob is that?

insanelyx

08-03-2006, 07:33 AM

anyone know where i can get a good price on a MOMO italia Shift Knob and E-Brake ?

tC4italy

08-03-2006, 03:57 PM

from Italy

(sorry that wasn't funny :roll:)

mandos

08-03-2006, 04:15 PM

http://www.icixsound.com/vb/icixnation/images/83_371.jpg

Can't believe I didn't post mine in here :)

Hint...it's the OBX mesh knob.

ichibansf

08-03-2006, 05:10 PM

Mandos, you're such a pimp! Here's my twosRus.com 'Neked' shift knob. Not bad for $30!

http://f5.putfile.com/6/17616461399.jpg

chinocavalera

08-03-2006, 09:16 PM

Before

http://img.photobucket.com/albums/v102/chinocavalera/Scion%20tC/SciontC1042.jpg

After

http://img.photobucket.com/albums/v102/chinocavalera/Scion%20tC/SciontC1043.jpg

If the pics are too big than I apologize. I dont really know how tp post pics properly. But if theyre fine than just pretend I didnt say anything.

Oh yeah thats the TWM Stage 2 with Type R Know, Gunmetal. And I just fixed the boot so it doesnt look all stupid like it does in the after pic.

chinocavalera

08-03-2006, 10:16 PM

After installing my new shifter and knob, like later in the day, I went for a drive. Damn that knob was hot. It almost hurt to shift. I had to put the stock plastic one back on. Now I keep it in my glove compartment just in case. Next mod on the list will be window tint for sure.

porkipine69

08-04-2006, 06:11 PM

has anyone seen a shift knob that matches the Black Cherry TC, I saw it once but I can't seem to find it again.

sosgal721

08-05-2006, 12:45 AM

What is the best one to get that doesn't get really hot?

paul34

08-05-2006, 01:43 AM

What is the best one to get that doesn't get really hot?

The leather TRD one might work...

but really, you could just put something over it

DarkApathy

08-07-2006, 11:22 PM

TRD shift knob on a CC SS.
http://i4.tinypic.com/23w9ssp.jpg

http://i3.tinypic.com/23w9th3.jpg

I used a hacksaw to cut this piece out, it was apart of that shiny plastic piece that attatches to the shift boot. Otherwise this or the OEM knob wont screw down on a SS.
http://i6.tinypic.com/23w9xyb.jpg

toeveryhour

08-11-2006, 03:51 AM

http://i46.photobucket.com/albums/f121/toeveryhour/dash3.jpg

OBX Speed Star

PandaPower

08-11-2006, 03:52 PM

ritz

08-24-2006, 07:02 PM

futurechiroDr

09-09-2006, 10:43 PM

Another monsterknob but this time for an auto tC.

http://www.scionlife.com/gallery/personal/23480_5.jpg[/img]

thontor

09-11-2006, 10:43 PM

anyone happen to know the thread or like how wide the metal rod is
or just if the shift knob off an IS300 auto
will work on a tC auto???
[give a noob a break on the terms lol]

eLpReSiDeNtE

09-11-2006, 10:56 PM

anyway u can shorten the stem?????

chrischoi

09-12-2006, 12:54 AM

the is300 knob should fit on a tc auto tc... i dont see why it wouldnt... it is toyota..

thontor

09-12-2006, 01:15 AM

the is300 knob should fit on a tc auto tc... i dont see why it wouldnt... it is toyota..
i dont see why not either
but might as well ask right?

futurechiroDr

09-12-2006, 12:37 PM

the size is 8mm X 1.25

Dr_Isotope

09-12-2006, 03:38 PM

8mm? I don't know of any shifters smaller than 10mm. Eight is scarcely over 1/4". The tC (and almost all Toyota) is 12mm, and most Hondas are 10mm.

futurechiroDr

09-13-2006, 12:56 PM

The auto tC is 8mm, manual is 12mm

Brakefade

09-14-2006, 10:04 AM

Cissellicious

09-15-2006, 08:12 PM

Are there any other knobs other than OBX that cover the little holes in the chrome ring at the top of the manual boot? There is a MOMO black leather knob similar to the OBX options that I would like to get but it doesn't have the collar at the bottom to cover that. Is there a way to get that finished look with a different knob? If so, please put up some pictures, I'm not seeing it on any of these on here so far.

ganske03

09-26-2006, 07:34 AM

Maybe you guys can help me out. Would this knob fit an auto tC?

http://cgi.ebay.com/ebaymotors/MK1-SHIFT-KNOB-SAAB-9-2X-9-3-9-5-9-7X-900-9000-SCION-TC_W0QQcmdZViewItemQQcategoryZ6755QQihZ006QQitemZ160032616366QQrdZ1QQsspagenameZWDVW

theblue

09-26-2006, 09:31 PM

^
i believe so, I think autos use the 8mm spacer? But double check that.

lildomicolo

09-27-2006, 03:34 AM

Where can I buy the setup for the TRD shift knob on a CC SS.

Bluechualappa

09-28-2006, 04:51 AM

Will the TRD knob work with auto transmission or is that a no?

2redgerm6

09-30-2006, 05:35 AM

here is my carbon fiber momo shift knob.

http://www.scionlife.com/gallery/personal/29320_3.jpg

sorry about the focus its my dads $500 8 megapixel camera (go figure :tap: ).

scion_jon

09-30-2006, 05:37 AM

Will the TRD knob work with out transmission or is that a no?

no it wont, i just got one, my dealer gave it to me free!!, so i went to try it and it doesnt fit!!!!!!!! so i put it back in the back in the package. its valued at 70 bucks!!! i might sell it

theblue

09-30-2006, 09:22 AM

Will the TRD knob work with out transmission or is that a no?

i dont understand.

Bluechualappa

09-30-2006, 09:25 PM

Typo ppl typo...

theblue

09-30-2006, 09:55 PM

Will the TRD knob work with auto transmission or is that a no?

if it has an 8mm (i think) spacer, it should fit.

Tito_Cruz

10-10-2006, 05:28 PM

http://img.photobucket.com/albums/v339/mee______nom/DSC01785.jpg

tCizzler

10-10-2006, 05:34 PM

http://i84.photobucket.com/albums/k33/tCizzler/HPIM0239-1.jpg

paul34

10-10-2006, 05:37 PM

danget! I must... get... a... TRD shift knob...

lowdownthrowdown

10-11-2006, 10:16 AM

Here's mine. Got it to match with my interior.

http://i85.photobucket.com/albums/k42/lowdownthrowdown/DSC_3069a.jpg
http://i85.photobucket.com/albums/k42/lowdownthrowdown/DSC_3071a.jpg

ashuras

10-11-2006, 03:02 PM

Here's mine. Got it to match with my interior.

http://i85.photobucket.com/albums/k42/lowdownthrowdown/DSC_3069a.jpg
http://i85.photobucket.com/albums/k42/lowdownthrowdown/DSC_3071a.jpg

Hmmmm, where did you score those seats and for how much if you don't mind me asking. That's some pimp interior man.

ganske03

10-13-2006, 07:33 AM

http://i112.photobucket.com/albums/n175/ganske03/Shiftbootconversion.jpg

tctrs1

02-07-2007, 07:19 AM

MikeC

02-07-2007, 07:26 AM

Sorry for the blurry pic.

http://i19.photobucket.com/albums/b180/fourustwentius/DSC01642.jpg

MayJ612

02-08-2007, 01:58 AM

i agree with ashuras

tc4fun4me

02-08-2007, 02:12 AM

yeah lowdown, that interior rocks...

DarkSci0n

02-08-2007, 02:15 AM

Sorry for the blurry pic.

http://i19.photobucket.com/albums/b180/fourustwentius/DSC01642.jpg

OMG are you serious.... That is the best shifter I have seen in a long time!

MikeC

02-08-2007, 06:58 AM

Thanks man, I wish all my taste was so good.8)

TougeTerror

02-08-2007, 05:15 PM

thats awesome! I bet it feels real nice to shift. Now if you could just incorporate a missile launcher you'd be in business.

Tito_Cruz

02-08-2007, 06:21 PM

THAT'S AWESOME! haha...

One button for NOS. Another for clutch...and yes, one for MISSLES!!!

BYAAHHHHHH!

rhino74s

02-08-2007, 08:39 PM

Razo Executive
http://i143.photobucket.com/albums/r143/rhino74s/interiorcloseup.jpg

kld04g

02-11-2007, 02:15 AM

http://img175.imageshack.us/img175/3489/ss3ng.jpg

twm stage 2 with flat black type r shift knob
i flipped the collar updside down... i am so smart... :rofl:

and did some cutting on the shift boot.

Has anyone else reversed the collar? I love that look, I want to do the same with my tC and for the shift knob itself use the TRD Ball knob (http://i15.ebayimg.com/01/i/04/24/04/c6_1_b.JPG). Pics of a similar setup would be great!

Kevin

STNC

02-11-2007, 07:01 AM

I LOVE THE RAZO EXECUTIVE!!!!!

GammaTNT

02-11-2007, 07:54 AM

does those metal knob ever get too hot or too cold?
i have TRD knob now, but thinking of getting a TWM weighted knob.

GammaTNT

02-11-2007, 07:57 AM

here is a pic http://i11.photobucket.com/albums/a156/gammatnt/car%20stuff/P1010013.jpg

scion_jon

02-11-2007, 08:06 AM

new boot, cause my other one had a slight tear in it, and new obx mesh shift knob since the center of my old one was chipping
http://i51.photobucket.com/albums/f382/scion_jon/boot%20swap%20out/1679638572_ORIG.jpg
http://i51.photobucket.com/albums/f382/scion_jon/boot%20swap%20out/1679638571_ORIG.jpg
http://i51.photobucket.com/albums/f382/scion_jon/boot%20swap%20out/1679638567_ORIG.jpg
http://i51.photobucket.com/albums/f382/scion_jon/boot%20swap%20out/1679638562_ORIG.jpg

King_Pin

02-12-2007, 10:11 PM

How about Green Snakeskin..... This is what we do with PatternTek...

http://www.scionlife.com/parts/images/parts/11046_dsc00330dddd.jpg

Heres a few examples of the many patterns and ways we can make your interior look unique.

http://www.scionlife.com/parts/images/parts/11046_walnutburl_small1.jpghttp://www.scionlife.com/parts/images/parts/11046_darkbluebirdseye_small1.jpghttp://www.scionlife.com/parts/images/parts/11046_wtp-233_small1.jpghttp://www.scionlife.com/parts/images/parts/11046_marble21_small1.jpghttp://www.scionlife.com/parts/images/parts/11046_snakeskin_small1.jpghttp://www.scionlife.com/parts/images/parts/11046_zebra_small1.jpghttp://www.scionlife.com/parts/images/parts/11046_marble27_small1.jpghttp://www.scionlife.com/parts/images/parts/11046_wtp-153_small1.jpghttp://www.scionlife.com/parts/images/parts/11046_sample2_small1.jpg

LOOK HERE......
http://www.scionlife.com/forums/viewtopic.php?t=159326&highlight=
http://www.scionlife.com/forums/viewtopic.php?t=157054&highlight=

gomdangie

02-12-2007, 10:32 PM

those TRD ones look sexy!

FIREDOG

02-12-2007, 10:40 PM

http://i175.photobucket.com/albums/w158/firedog813/sjift-knob.gif

can patterntek change the chrome mesh center piece red?....

King_Pin

02-12-2007, 10:45 PM

FIREDOG
We cannot change the mesh but can do lots of diff knobs...

2fast4you

02-13-2007, 12:10 AM

MOMO Alcantara Raptor and shift boot.

http://i113.photobucket.com/albums/n202/digiengineer/ShiftKnob.jpg

captainlaziness

02-13-2007, 12:17 AM

OBX knob yo :P
http://i73.photobucket.com/albums/i239/captainlaziness/HPIM0381.jpg

Not the best pic, but the only one I have.

FIREDOG

02-13-2007, 02:31 AM

2fast4you how much did you pay for knob?....boot?

2fast4you

02-13-2007, 02:48 AM

2fast4you how much did you pay for knob?....boot?

Way too much... LOL! About $69 each. Both are discontinued and I had to search through a lot of websites that hadn't been updated in a year to find them in stock. Happy hunting.

MayJ612

02-13-2007, 12:52 PM

ICrazyChrisI

02-16-2007, 12:42 AM

CC shortshifter + Voodoo Racing pearl finish knob

http://img144.imagevenue.com/loc247/th_86656_Misc_005_122_247lo.jpg (http://img144.imagevenue.com/img.php?image=86656_Misc_005_122_247lo.jpg)

TENNEYtheTC

03-25-2007, 05:45 PM

Here is the spun Voodoo racing Knob on B&M sport shift with the cage bushings

http://i154.photobucket.com/albums/s276/TENNEYtheTC/voodoo1.jpg
http://i154.photobucket.com/albums/s276/TENNEYtheTC/voodoo2.jpg
http://i154.photobucket.com/albums/s276/TENNEYtheTC/voodoo3.jpg

FIREDOG

03-25-2007, 07:39 PM

anyone driven a new mustang GT, i love the shift knob on that car

Cissellicious

04-02-2007, 08:28 PM

Has anyone bought this one yet? If so, can you post some pictures?

http://www.trdsparks.com/displayparts.php?Mdl_dtl=474&Part_cat=20&parts_id=1451

LaydDly

04-03-2007, 03:24 PM

Megan Racing Short Shifter and Knob not to bad for $65 but the knob does get warm. id like to find a nice simple leather knob.

http://www.layddly.com/gallery/d/4821-2/DSC_0771.JPG

FIREDOG

04-04-2007, 01:39 PM

bump for cissellicious question?

ichibansf

04-04-2007, 03:43 PM

ichibansf, do you have any other pictures of you knob?

I like that one, it looks like the A6 Leopard but isn't crazy expensive.
The pics on the site are blury and I can't tell what the finish looks like. Is the "Naked" a satin that matches the trim of the car?

How does it fit? I know you dont have a short throw, and it looks like your missing the metal piece that holds down the boot. Any reason for it? did you need to take that off in order for it to screw down?

Sorry for the late late reply.... the twosRus 'naked' knob comes with a machined finish, which I would describe as half satin/half polished? Then as you use it more it becomes polished. I think in that pic I already had my B&M short shifter installed. I didn't like the chrome collar thing so I didn't use it, but if you did I think it would make the boot collar look better.
I ended up changing my setup again after finding out that Doc Isotope was making knobs out of delrin, which is a very hard plastic. No more burning shift knob!!! Plus he fabricated a matching e-brake cover... muy bueno!! :clap:
http://ichibansf.smugmug.com/photos/141022908-L.jpg
He can make the shiftknobs to your spec, based on the styles on his website or anything else you can imagine. The knobs can also be weighted.

rjj130

04-13-2007, 01:12 AM

Anyone think that this knob would fit?

It's a 5 speed RSX knob...

See it here... can't get the properties of the photo.

http://www.handa-accessories.com/rsx.html

nauticac

04-13-2007, 02:02 AM

doesn't the stock knob fit on the Megan SS?

ilovemytC

04-13-2007, 08:16 PM

Custom carbon fiber and leather Scion shift knob, matches the seats!

http://i17.photobucket.com/albums/b60/ilovemy65stang/MY%20TC/DSCF1439.jpg

http://i17.photobucket.com/albums/b60/ilovemy65stang/MY%20TC/DSCF1378-1.jpg

Crayola_G

04-16-2007, 07:33 AM

you auto guys should fig. out a way to cut that shifter in half, its so freakin tall,

gomdangie

04-16-2007, 07:32 PM

you auto guys should fig. out a way to cut that shifter in half, its so freakin tall,

i agree... i wish i have skill

ilovemytC

04-16-2007, 07:46 PM

^^x2, but I am not going to do any modifications to stock parts until it's paid in full, or I have a replacement.

rhino74s

04-17-2007, 03:03 AM

All depends on the type of shift knob you get too. Mine doesn't sit nearly that high. You can find some that have the threads toward the top of the shift knob. Makes it look lower anyway.

jjos1

04-17-2007, 03:13 AM

Very bad pics of my trd knob :bow:
http://i114.photobucket.com/albums/n245/jjos1/041107_18211.jpg
http://i114.photobucket.com/albums/n245/jjos1/041107_18212.jpg

ilovemytC

04-17-2007, 06:12 AM

I like!

BrownDogg

04-17-2007, 06:29 AM

Does anyone know where I can buy the little chrome colored collar for the shift boot? I need one

2_tC

04-17-2007, 08:32 AM

Does anyone know where I can buy the little chrome colored collar for the shift boot? I need one

I think it only comes complete as an assembly with the shift boot:

http://www.trademotion.com/partlocator/index.cfm?action=getLocator&siteid=214631&chapter=ARM8560&appSectionid=2648&groupid=3396&subgroupid=4204&componentid=0&make=37&model=tC&year=2006&graphicID=8560260&callout=16&catalogid=2

Give Ken at Sparks Toyota a call, he might be able to get just the collar for you.

Ushki

04-18-2007, 03:02 AM

http://i125.photobucket.com/albums/p68/Ushki1221/DSC00776-2.jpg

harrellj

04-18-2007, 04:09 AM

How'd you lower your shift knob? I do see that is a/t, so I highly doubt a short shifter?

paul34

04-18-2007, 04:16 AM

How'd you lower your shift knob? I do see that is a/t, so I highly doubt a short shifter?

I think on some of the knobs, you can actually just keep screwing it on, and it will go on more.

Otherwise I suppose you'd have to cut it, then rethread the stock stick.

harrellj

04-18-2007, 04:18 AM

That's the stock automatic knob tho! There's also a sheer height thing, look at ilovemytc's pictures on this page to see the difference in height.

paul34

04-18-2007, 04:19 AM

That's the stock automatic knob tho! There's also a sheer height thing, look at ilovemytc's pictures on this page to see the difference in height.

maybe they didn't screw it on all the way :doh: :P

yea I just looked at the pic... that's scary high, its like a boat oar or something :nails:

harrellj

04-18-2007, 04:45 AM

LOL for me, its a good height.

Ushki

04-18-2007, 11:38 AM

i pulled off the knob, and cut the steel bar about a inch and a half...and then put the knob but on with silicone.

harrellj

04-24-2007, 02:44 AM

Ushki, interesting but not something I'd do :P

I finally got my boot and knob in! Interestingly, the knob came in Saturday and the boot came in today.

http://img.photobucket.com/albums/v201/harrellj/Car/DSC00253.jpg

And from further away:

http://img.photobucket.com/albums/v201/harrellj/Car/DSC00251.jpg

and even closer up:

http://img.photobucket.com/albums/v201/harrellj/Car/DSC00256.jpg

I've still got some minor fussing to do in terms of what to do with the top of the boot (rolled up is fine, but being that much bigger than the shaft? Not fine). I also need to try a different adapter, I think this one is still too big. Lastly, I need to replace the double-sided tape with something that'll hold it better.

You can't tell because of the way the lighting is and the fact that there's 2 different materials involved, but they actually match perfectly and go beautifully with the interior of the car.

ilovemytC

04-24-2007, 04:14 AM

:clap:

looks awesome!

Racersky

04-24-2007, 10:50 AM

iono why but i'm loving the voodoo shift knob and also the type-r

obarajas

05-01-2007, 06:33 AM

here is mine

http://i72.photobucket.com/albums/i194/Obarajas/S5000110.jpg

http://i72.photobucket.com/albums/i194/Obarajas/S5000112.jpg

blaze1693

05-01-2007, 03:50 PM

here is my dojo carbon fiber shift knob
http://memimage.cardomain.net/member_images/4/web/2236000-2236999/2236962_21_full.jpg

InfideL

05-01-2007, 06:06 PM

TWM knob and CC short shifter

http://i129.photobucket.com/albums/p227/gundamxwgz/DSC01447.jpg

http://i129.photobucket.com/albums/p227/gundamxwgz/DSC01446.jpg

that was when i just installed it you can see the dremel...yes i highly recommend you cut that stupid ring

timmyinpajamas

05-02-2007, 07:52 PM

twm 2 short throw and boot n greddy counterweight knob
http://img.photobucket.com/albums/v665/timmyinpajamas/carbonn.jpg

Cabana

05-02-2007, 09:40 PM

http://i72.photobucket.com/albums/i194/Obarajas/S5000112.jpg

Who makes this?

obarajas

05-04-2007, 05:17 AM

^ I don't remember , I got at autozone for $15 I only got because it match with the center console.

Cabana

05-04-2007, 04:22 PM

That's why I like it, thanks

RoadOgre

05-06-2007, 01:36 AM

Sorry picture sux. Blue paint is highly reflective.

http://i158.photobucket.com/albums/t81/RoadOgre/Interior2a.jpg

BrownDogg

05-06-2007, 02:04 AM

That looks really good! I love the blue. How did you paint the interior pieces and have them come out so nice??

BrownDogg

05-06-2007, 02:48 AM

Heres some pics of my shift knob

http://i17.photobucket.com/albums/b54/BrownDogg04/Scion%20tC/img189.jpg

http://i17.photobucket.com/albums/b54/BrownDogg04/Scion%20tC/img187.jpg

http://i17.photobucket.com/albums/b54/BrownDogg04/Scion%20tC/img186.jpg

http://i17.photobucket.com/albums/b54/BrownDogg04/Scion%20tC/img188.jpg

http://i17.photobucket.com/albums/b54/BrownDogg04/Scion%20tC/img190.jpg

http://i17.photobucket.com/albums/b54/BrownDogg04/Scion%20tC/img185.jpg

And one of the car for good measure :)

http://i17.photobucket.com/albums/b54/BrownDogg04/Scion%20tC/img193.jpg

RoadOgre

05-06-2007, 02:59 AM

I used Dupli-Color in a rattlecan. Started with one coat of Adhesion Promoter. Then I used a coat of Ground Coat followed by MetalCast Anodized Blue and a couple coats of Clear coat. No one seems to believe me but I didn't use any sandpaper and it came out very smooth. The pictures don't do it justice. The paint makes it look like actual anodized metal when you use the Dupli-Color Ground Coat. Just remove the parts, tape well, and take your time.

Whocares05050

05-06-2007, 04:40 AM

http://i8.photobucket.com/albums/a34/Whocares05050/DSC_0051.jpg

mbaledge

05-10-2007, 12:48 AM

Tcguy85

05-10-2007, 02:10 AM

Faux Alcantara boots from RedlineGoods (sponsored sales forum) with TRD knob and B&M short shifter (no spacers so 1/2" lower than stock):

http://i18.photobucket.com/albums/b134/t_do/boot.jpg

Dude, that's wicked clean. Just get a S/S!

he said he has the B&M SS.

mbaledge

05-10-2007, 02:56 AM

So he does. Silly me. It doesn't look very short, tho.

paul34

05-10-2007, 03:31 AM

Tcguy85

05-10-2007, 03:32 AM

So he does. Silly me. It doesn't look very short, tho.

nah the B&M shortens the throw but not the actual height. i prefer my creative compacts SS.

mbaledge

05-10-2007, 03:34 AM

I know that one doesn't necessarily go hand in hand with the other, but I think our interiors look better with a shorter stick. Just my 2 cents.

blaze1693

05-14-2007, 02:56 PM

ANOTHER SHIFTER I USE
DOJO Gunmetal

http://memimage.cardomain.net/member_images/4/web/2236000-2236999/2236962_26_full.jpg
http://memimage.cardomain.net/member_images/4/web/2236000-2236999/2236962_24_full.jpg

ack154

06-14-2007, 09:58 PM

Dr Isotope weighted delrin knob and collar:

http://downloads.allankintz.com/tC/IMG_1979.jpg

http://downloads.allankintz.com/tC/IMG_1982.jpg

GammaTNT

06-14-2007, 11:38 PM

ack, how does that delrin knob feels?

ilovemytC

07-08-2007, 12:30 AM

Here's my before and after. Dupli-color "Silver Metallic" paint, perfect match to OEM. What you guy's think?

Before:
http://i17.photobucket.com/albums/b60/ilovemy65stang/MY%20TC/DSCF1439.jpg

After:
http://i17.photobucket.com/albums/b60/ilovemy65stang/MY%20TC/DSCF2334.jpg

http://i17.photobucket.com/albums/b60/ilovemy65stang/MY%20TC/DSCF2328.jpg

fox

07-08-2007, 04:19 AM

http://i112.photobucket.com/albums/n190/foxsciontc/DSC00250.jpg

http://i112.photobucket.com/albums/n190/foxsciontc/DSC00251.jpg

ack154

07-08-2007, 05:41 AM

ack, how does that delrin knob feels?
Wow, didn't see this when you posted it... sorry.

It feels great actually. Never too hot... don't know about cold yet, but I hear that's good too. Very nice. Would recommend one for sure if you're looking for something different.

tChui

07-08-2007, 06:03 AM

Skunk 2 on a TWM Stage 2
http://i27.photobucket.com/albums/c167/dtchui/03212007107.jpg

lbjshaq2345

07-23-2007, 11:21 AM

It matches the fabric of the seats on the tC.

http://memimage.cardomain.net/member_images/4/web/784000-784999/784577_24_full.jpg

Hahah, I like the cigarrette lighter. Where did you get that?

nice walmart knob xD. had that one for a few weeks and couldn't stand the height

TougeTerror

07-23-2007, 12:45 PM

Doc I's weighted Waisted knob w/:
Doc I's short shifter & cage risers
Redline shift boot
modified OEM collar

http://img.photobucket.com/albums/v470/Frankbianchi/knob.jpg

ack154

07-23-2007, 01:44 PM

I'm just guessing it's b/c the picture is so close, but that knob looks huge... How's it feel though? I considered something like that when I ordered but it just didn't seem like it would be comfortable.

TougeTerror

07-23-2007, 02:26 PM

It's only about three inches tall. You can either grip the top of it with the palm over the knob or wrap your middle finger in that grooved section. It's really comfortable.

Breakfast_at_Tristans

07-27-2007, 02:21 AM

Leather with chrome cut out...

http://i32.photobucket.com/albums/d3/TristanR/IMAGE_074.jpg
http://i32.photobucket.com/albums/d3/TristanR/IMAGE_072.jpg
(sorry if the pics are huge)

ack154

07-27-2007, 02:31 AM

Now THAT looks like a tall knob. Is that the stock shifter? That would just be too high for me...

Breakfast_at_Tristans

07-27-2007, 02:51 AM

yea.. thats the stock shifter. Its pretty tall, a bit shorter than the stock knob though. I would like to make it a little shorter... BUT I cheated... its an automatic :P

Ace83

07-27-2007, 03:41 AM

Im thinking of Dr. Is knob, but damn hard to decide. lol

Vang2k

07-31-2007, 12:23 AM

was bored and changed my shift knob on my auto tc.

http://i208.photobucket.com/albums/bb137/vang2k/IMG_3074.jpg

http://i208.photobucket.com/albums/bb137/vang2k/IMG_3073.jpg

http://i208.photobucket.com/albums/bb137/vang2k/IMG_3080.jpg

CarlStooop

07-31-2007, 02:30 AM

here's my shift knob... I can't say I've seen another scion with it, but that doesn't mean they aren't out there... I love this... small, nice style... just can't wait til I can get a TWM short shifter someday... sigh

http://i71.photobucket.com/albums/i151/gemmyd63/gradpartyhoag003.jpg :tap:

equinox2355

07-31-2007, 02:53 AM

Leather with chrome cut out...

http://i32.photobucket.com/albums/d3/TristanR/IMAGE_074.jpg
http://i32.photobucket.com/albums/d3/TristanR/IMAGE_072.jpg
(sorry if the pics are huge)

I like it

Where did you get it? Whats it called?

ADRdesignCo

08-16-2007, 10:49 PM

someone else has this shift knob on here i think, but i think we bought it for the same reason, cause it looks stock. lol

http://i10.photobucket.com/albums/a117/adrdesignco/280%20paint%20bucket/DSC00638.jpg

ack154

08-16-2007, 10:58 PM

^ Ya, if the silver matches the waterfall piece, it would look really good.

ADRdesignCo

08-16-2007, 11:46 PM

it actually comes really close. but it matches the silver in the bezel perfectly imo esspecially with that brushed alum look. the the stiching on the sides match the stiching on my steering wheel cover, which has that blueish/black hue like the seats. so id say it matches pretty well :P

Dr_Isotope

08-17-2007, 12:53 AM

So he does. Silly me. It doesn't look very short, tho.

A short shifter shortens the throws, not the height.

Lower shifter height is just a popular options a lot of SS's have. A true racing SS setup involves a tall shifter combined with short throws.

I just read this post, actually (I admit, combing the thread for pics of my own knobs :P ), so I thought I'd post up my take on that...

http://img.photobucket.com/albums/v307/DrIsotope/88interior.jpg

It's cocobolo, if anyone's interested.

tC4italy

08-17-2007, 03:25 AM

mine to come soon :lalala:

jamessicat25

08-17-2007, 03:38 AM

damn you prolly feel like driving an 18 wheeler huh?

Dr_Isotope

08-17-2007, 03:49 AM

damn you prolly feel like driving an 18 wheeler huh?

Not exactly. My shift throws are about 20% shorter than stock, and the shifter is never more than 6" away from the steering wheel-- and that's only in fifth. 1st and 2nd gears are 3.5" away from the wheel.

But as I've said 100 times, it's not for everyone. I don't even make them for other people. It gets in the way of the HVAC, blocks the clock almost all the time, and I have to reach around it to pause the radio. But it's worth it, 100%.

InfideL

08-17-2007, 06:47 AM

very nice, very original, and very practical
much less time and effort to shift
:clap:
i would rather have aluminum tho...
wood seems a little out of place in the tC

riboflavin

08-17-2007, 06:52 AM

wow that's one unique shifter for tc

Dr_Isotope

08-17-2007, 06:59 AM

very nice, very original, and very practical
much less time and effort to shift
:clap:
i would rather have aluminum tho...
wood seems a little out of place in the tC

I had a delrin knob/brake handle set for a good while, but my background is in woodworking, so I'm always drawn back to wood. It feels so nice to hold. I'm probably going to spin another set, out of something more rare, like lignum vitae or mountain ironwood.

Cmkadlec

08-19-2007, 09:02 PM

is the raze executive weighted? threaded?

what about the MOMO pahntom or f-16? weighted? threaded?

tC4italy

08-20-2007, 04:12 PM

is the raze executive weighted? threaded?

what about the MOMO pahntom or f-16? weighted? threaded?

My friend just bought 2 MOMO shift knobs.
The Raptor and the Shadow.
He has a manual I have an auto. We will see if they fit proper.

schuttrp

10-01-2007, 07:09 PM

We made a few custom designs from billet aluminum, and this is by far the most comfortable ...

Its got a mushroom shape so your palm rests comfortably and your fingers curl under for a great grip ... I need it to help tame the 300+ hp under the hood ...

http://i20.photobucket.com/albums/b250/schutterp/P1060359.jpg

http://i20.photobucket.com/albums/b250/schutterp/P1060361.jpg

http://i20.photobucket.com/albums/b250/schutterp/P1060360.jpg

It passes the drivability test ... what do you guys think of the look?

BlackRose617

10-25-2007, 10:01 PM

does anybody know if the auto shifter is the same thread size and the manual shifter?

jiggadomino

10-25-2007, 10:20 PM

damn do.iso do you actually roll with that wood and your custom shifter?

silverstreaktc

10-27-2007, 08:21 PM

satin type-r shift knob from twm

nauticac

10-29-2007, 02:15 AM

Sparco Globe-X Perforated Leather knob on a Megan Racing SS.

http://i160.photobucket.com/albums/t172/nauticac/33.jpg
http://i160.photobucket.com/albums/t172/nauticac/44.jpg

tadjo

10-29-2007, 03:32 AM

there is some really funny stuff on here

toroTC

11-13-2007, 03:38 AM

short shifter w/ type s light up shift knob

http://memimage.cardomain.net/member_images/7/web/2935000-2935999/2935745_13.jpg

http://memimage.cardomain.net/member_images/7/web/2935000-2935999/2935745_9.jpg

SengTC3

11-29-2007, 12:02 AM

skunk 2 Type-r knob..... Soon to have doc isotope ss with a redline boot... soon =[

http://i100.photobucket.com/albums/m9/bigseng/IMG_5503.jpg

CSUnited14

12-01-2007, 08:59 AM

BMF

12-13-2007, 06:50 AM

some are cool but some are kinda wierd

5speedonly

12-17-2007, 12:12 AM

http://i121.photobucket.com/albums/o223/5speedonly/toohot.jpg

this was taken early summer. i moved out before it became hotter

ADRdesignCo

12-17-2007, 06:16 AM

thats hot.. but not necessarily in a good way.. lol :silly:

Oznium_com

12-17-2007, 06:13 PM

HMmm its hot kekeke maybe in a goodway?

SCIONshane

01-12-2008, 04:34 AM

http://img2.putfile.com/thumb/1/1023284615.jpg (http://www.putfile.com/pic.php?img=7467223)

CRUZtc8

01-13-2008, 09:01 AM

^^ Nice knob!

ERock

01-21-2008, 06:03 AM

So i decided to get an obx Manual knob on my 07 auto, and it was pretty easy: rip up old knob, Dremel tool the plastic insert till it mates w the new knob, and voila! It looks sharp, isnt off center and isnt all wobbly!! OEM fitment!

Woo Hoo! Mod# 1, done!

http://erloner.blogspot.com/search?updated-min=2008-01-01T00%3A00%3A00-08%3A00&updated-max=2009-01-01T00%3A00%3A00-08%3A00&max-results=5

:lalala:

dqlostsoulz

02-06-2008, 04:27 AM

does anyone know where i can get the razo ra98gyt shift knob in white?

SengTC3

02-06-2008, 04:47 AM

does anyone know where i can get the razo ra98gyt shift knob in white?

did yo try cardomain.com ? I know razo has a vendor there

dqlostsoulz

02-06-2008, 05:44 AM

I dont know how to find it on cardomain.com i enter shift knob on the serch and it gives me nothing.

ThisDudePaul

02-11-2008, 08:44 AM

anyone knob if the greddy trust shift knob will fit? is the thread pattern the same on acuras and scions?

scionora09

03-02-2008, 08:29 AM

okay. . .so looking through this thread makes me ask this question. . .Why is it that some pictures have the boot flush with the knob, while other pictures have the boot a few inches below the shift knob? Is there some sort of modification done? :doh:

ADRdesignCo

03-02-2008, 08:44 AM

^short shifter.

STNC

03-03-2008, 06:15 PM

So I got my Dil** today, expect it on the car soon, with pics...hehe...

BuddhasTC

04-11-2008, 06:34 AM

twm 2 short throw and boot n greddy counterweight knob
http://img.photobucket.com/albums/v665/timmyinpajamas/carbonn.jpg

i just picked this knob up today and installed it before i went to work...i'll have to get some pics up soon too...great knob!

smilezdc

04-11-2008, 06:38 AM

http://i4.photobucket.com/albums/y106/dannychangsays/IMG_4395.jpg

ignore the ridiculous height.. its on a megan short shifter now..

dqlostsoulz

04-11-2008, 06:39 AM

I have the megan short shifter w/cage risers and sparco shift knob I love it...............

http://i109.photobucket.com/albums/n76/dqlostsoulz/CIMG0163.jpg
http://i109.photobucket.com/albums/n76/dqlostsoulz/CIMG0161.jpg

etoomey3

04-24-2008, 01:56 AM

Agency Power Shift Knob, Got it for $10 on clearance from vivid racing........apparenty it was "damaged" but I didn't notice anything
http://i290.photobucket.com/albums/ll265/etoomey2/Pictures001.jpg
http://i290.photobucket.com/albums/ll265/etoomey2/Pictures002.jpg
http://i290.photobucket.com/albums/ll265/etoomey2/Pictures003.jpg

toyotaguy

05-20-2008, 01:36 AM

does anyone know a place where I can get a good price on the TRD shift knob???

toeveryhour

07-07-2008, 07:59 PM

BUMP!

it's been a while... but update!!

Sparco Road shift knob:

http://i46.photobucket.com/albums/f121/toeveryhour/Desert%20Shoot%20July/DSC04057.jpg

freep

07-07-2008, 10:33 PM

Doc Iso GS Extreme w/ Pineapple knob.....I've very happy with it! I've got Doc I's shifter bushings as well. Feels like a whole new car.

http://memimage.cardomain.com/member_images/9/web/2289000-2289999/2289300_116_full.jpg

SCIONshane

07-08-2008, 12:38 PM

^^^ Now that's loooow.

freep

07-08-2008, 04:30 PM

^^^ Now that's loooow.

Doc I FTW......It feels amazing, just a small click from gear to gear. I think it was a 2" height reduction, and the knob itself is a little shorter than the stock one.

tCtCtC

07-08-2008, 04:31 PM

watching

freep

07-08-2008, 04:33 PM

watching

for what?

tCtCtC

07-08-2008, 04:41 PM

i dunno

SCIONshane

07-08-2008, 05:59 PM

Yeah the doc i's are crazy low. I got my TWM stage 2 and was blown away by it. then saw some of the isotope shifters and was like HoLy CrAp.

I've got the shifter base bushings as well. And the cable bushings. It makes a world of difference in driving the car.