Delete....

Just picked up the Springs & Retainers from a member her on scionlife! Now I'm looking for the BC Stage 2 N/A cams & BC valves.

If anyone has the BC valves I would need the standard size.

i have the new n/a stage 2 cams wich are the same as the stage 2 turbo, going to be installing them in 2 weeks stay tuned on the powertrain forum for results. i don't think they have standard size, they have .5 & 1.0 over.

First off congrats for making 200 + N/A! I'm planning on hitting that goal by the end of the racing season this year. With the Stage 2 turbo cams they are different from the N/A cams because the duration and lift are different to compensate for the application. For example, the duration/lift on the turbo cams are 272/272, with the N/A cams its 264/256. Let me know how your car idles with the turbo cams installed! With the BC Valves they do come with a standard, .20 and .40 over sizes and since I'm not altering the head I need the standard size valves.

Jimmy I read up on your thread in the Powertrain Forum and thanks for the info! I'll be getting the Stage 2 Turbo cams in the near future. Still looking for anyone with the standard size BC valves.

Jimmy I spoke with a rep from Brian Crower and found out that the .05 valves you advised would work for the standard head without any major complications. Thanks for the advice!

O.K. if anyone has the BC Stage 2 Cams or +.1mm BC valves please let me know. Looking to make purchase soon.

Picked up the BC Stage 2 turbo cams from a member here on scionlife! Only thing I need now to complete the head is the +1.0mm BC valves! Let me know if you have them.....very motivated to purchase asap!

Just picked up the +1mm BC Valves. Upgraded engine head internals is complete! I would have to say that I probably spent 40% less on BNIB parts here on scionlife.....sweet!