It has been a long journey, but finally :relief: , they are installed and wired.........

http://www.cardomain.com/memberpage/665356/4


Next up, installing my HID retrofits, stay tuned.......... :P

SUH WEET

did you install them? Those look nice!!! How much did the whole thing run you?

Yes, I installed them myself. The whole thing ran me about $170.

oh yeah, how did you do it?

Did you remove/break the inner yellow lens?

I used a coping saw to cut the bumper until the fog lights fit. You could use a dremel if you want, but I just used what was lying around the house. Then I used a heat gun to take apart the housing. I then flipped and switched the projectors. After that, it's all about mounting and wiring.

Did you remove/break the inner yellow lens?

No, they are still yellow............my camera just sucks

They look good, very factory.

very nice!

I like the factory ones more. Once you get the shades to match up it will look better, having 2 different colored lights to me, makes the car look cheap.

That looks awesome -- way better than those awful stock tC fog lights.

If they are still the OEM yellow is300 foglight bulbs......GO WITH LUMANICS JDM YELLOW BULBS.....that would look bas a$$

where did you get the fog lights?

looks good.. i'd be too intimadated to cut up the bumper though.

how did you get the lights to stay in place?

that is hotness, i was waiting for someone to actually make the idea i had come true. they look awesome dude. but if ya hadda cut the bumper then i'd hesitate.. lets hope that the aftermarket makes something like that soon that would not require any cutting of the bumper, sorta like easy "plug & play" ya know? gj tho :clap:

I like the factory ones more. Once you get the shades to match up it will look better, having 2 different colored lights to me, makes the car look cheap.

i rather get the the yellow ones, plus fog lights perform better when yellow because the yellow beam does not reflect back.

nice mod btw

where did you get the fog lights?

ebay


how did you get the lights to stay in place?

I cut the bumper so that when i push the fog lights in, they would get stuck. I don't know any other way to explain it. I made it so you can only take it off from behind the bumper. The only problem with that is that the lights would wiggle with vibration. As a result I just used a whole bunch of electrical tape to stabilize them. If I had the knowledge and resources, I would fiberglass a housing for the lights. I was impatient and had to "MacGyver" the situation. I know its kinda ghetto, but you can't tell from the outside :P

I cut the bumper so that when i push the fog lights in, they would get stuck. I don't know any other way to explain it. I made it so you can only take it off from behind the bumper. The only problem with that is that the lights would wiggle with vibration. As a result I just used a whole bunch of electrical tape to stabilize them. If I had the knowledge and resources, I would fiberglass a housing for the lights. I was impatient and had to "MacGyver" the situation. I know its kinda ghetto, but you can't tell from the outside :P

Let us know how that works out for you in the long run!!!

those look really good

that is one awesome tC u have there man. ur interior mods are clean also. i like haha

Is there any way you could get a daytime pic? I'd like to see how they look in the light. Looks good so far though!

I'll try to take some later today

looks nice man, much better than the WRX style factory fogs - good work!

great job. one of my next conversions. one question though, did you have to take the bumper off? and if you did, when you ran the wires up through the compartment, did you go through the firewall grommet? and if so, where did you power the foglights at?

ok, weirdly formed 3part question.

Yes, I had to take off the bumper. I have done it so many times that I think I am a pro at it! I did go through the firewall and I tapped into the fuse that powers the reverse lights,ac, and a whole bunch of other stuff.

very clean, much props.

For those who wanted daytime pics.....

http://memimage.cardomain.net/member_images/5/web/665000-665999/665356_43_full.jpg
http://memimage.cardomain.net/member_images/5/web/665000-665999/665356_42_full.jpg
http://memimage.cardomain.net/member_images/5/web/665000-665999/665356_44_full.jpg

vey nice job

WOW ... Thats cool that they fit ... How did you mount them into the bumper? Do you have any pics from behine the bumper?

Man those projectors look bad a$$. Where did you have them made? how much did it cost you total for both headlights? :bow:

Looks great . . . i like that stock look . . . hope you have a pic in the cay that if you can . . . but averall love the foglights . . .

sorry i mean day time pics of the fog lights hehehe

it was awoke! from the dead! long live the thread.

^ haha, yea the lights are hot

"EEEEEHHHHHHHH" (Thread Zombie!) :lol:

awesome.

that looks so dope!

from the dead, love the FOGS! i just bought a set of IS300 fogs, and i want them in NOW hahaha

you installed them on the stock tc bumper?... and where did you get the lights from? and did you have to do anything to the inside of the fog lights for the lighting?

you installed them on the stock tc bumper?... and where did you get the lights from? and did you have to do anything to the inside of the fog lights for the lighting?

doesn't anyone read? He posted on the first page that he got them on eBay and he cut the bumper to wedge them in.

one of my dreams that came true......

damn im fo sho gonna do this, les jus hope i never resell or the ppl tht buy it never tke off the fogs if i do resell

Very nice and clean. Finally, something useful to use those fake vents for.