i have seen it done, and i have seen it done on a mini. i have seen it on an Xb, i have seen it and dammit do i want it.

does anyone have any knowledge on what must be done in altering the car so that the 20's would fit (i.e. roll fenders, hammer wheel well)??

oh and i'm working on a fiberglass enclosure in the back and i am going to post a picture journal about that as well!

rock on!!

depends on if you drop your box or not if you have you use the trd springs all thats needed is the 225/30/20 made by bfg or theres a new one coming out thats cheaper and thats made by nitto, if you use those tires and that drop just some trimming of the plastic, nothing to major, but if you drop it 2 inch or more youre going to have to do a lot more work, go to the tread and butter section and look up 20's theres a bunch of posts about it, also the wheel has to be a 20 x 7.5

sweet man, thanks for the quick reply.....to tread and butter i go!!! FREAKIN SWEET!

oh ya just to let ya now if you hit a pot hole your screwed ive priced out just about all the 20x7.5 and there all around 400 +or- a little and the bfg tire is at least 425 a tire and i think the Nitto is going to be around 250 or so but still nothing diffenet and its not released yet, hope that helps