shane_reid
04-13-2005, 01:25 PM
What is the torque spec for the lugnuts on the wheels on the tC - I swore I posted this last night, but perhaps I had too much yuengling.
|
View Full Version : Torque Spec for Wheels sciontc_mich 04-13-2005, 05:49 PM the torque for the wheel lugnuts is 76 ft-lbs for the tC.. hope that helps.. rjj130 04-13-2005, 07:36 PM Ha, I had a few Yuenglings last night...I actually tried a case of the Light and it's not bad...B&T is still my absolute fav of the Yuenglings... dgHotLava 04-13-2005, 07:37 PM moved... pdrizzle 04-13-2005, 08:12 PM RTFM tinybigrig 04-14-2005, 07:54 AM from axis wheels http://www.axiswheels.com/faq.html What is the best way to Tighten my lugs and how much should I Torque it? Tighten lug nuts of bolts in a progressive criss-cross pattern. Impact wrench are not recommended due to the possibility or irregular or overtightening. Owner's manual recommended torque specification should be followed. If not available, please refer to the following torque guide: 12mm Stud. Dia. 70-80ft/lbs 14mm Stud. Dia. 85-95ft/lbs 7/16" Stud. Dia. 55-65ft/lbs 1/2" Stud. Dia. 75-85ft/lbs 9/16" Stud. Dia. 95-115ft/lbs scions are 12 mmx 1.5 for the thread pitch brent |
|