well i finally got them installed and just took some pictures. tell me what you think!


http://i6.photobucket.com/albums/y247/swornthug/halo4.jpg
http://i6.photobucket.com/albums/y247/swornthug/halo3.jpg
http://i6.photobucket.com/albums/y247/swornthug/halo2.jpg
http://i6.photobucket.com/albums/y247/swornthug/halo1.jpg

These look really bright for some reason. Where did you order these from and how much?. I'm actually going to order some tonight, i'm looking through threads now, so I can avoid some of the problems that i'm hearing about them (fogging, not fitting, halo not working when recieved).

Seen a pair on ebay for like $100-125, but it looks like i'm going to probably pay $195 through scionsport.com

i got mine through scion sport. they fit fine on my box. with tax and shipping i paid $214 and i got them over night. i ordered them monday night and i got them tuesday afternon. fast shipping.

Just noticed that the LED's on the left headlight aren't on, but the ones on the right are. Do the LED's blink when the signal lights blink or how do you have them wired?.

Iv heard they are all made by the same company, except the anzo ones. So it will not matter were ya get them. Don't pay to much. :doh:

i got mine through scion sport. they fit fine on my box. with tax and shipping i paid $214 and i got them over night. i ordered them monday night and i got them tuesday afternon. fast shipping.

Can you take a picture with the Projectors on? Looks like i'll be making an order tonight.

I already have a few goodies waiting in the mail, hehe. Can't wait! :P

its becuase of the angel i shot the picture at.

hmm alright i'll take a quick picture but its not dark enough where i am at

Just noticed that the LED's on the left headlight aren't on, but the ones on the right are. Do the LED's blink when the signal lights blink or how do you have them wired?. hes got them on its just the ANGLE he took the pic at ..... an i paid $324 for mine off ebay when they first came out..... an they fit perfect and i do have my leds 2 the parkin lights and halo's to my headlights so the leds have a blinker effect...... but im bout to change it up.

Ohhhh, ok! Man they look beautiful. I've seen them on other people boxes before, but on yours they just look damn beautiful.

I'm waiting on a deposit, and it won't go through until the hours of 12am-6am tonight, so it looks like i'm going to be ordering them when I wake up! Woo-hoo!

those rings do look bright.....
when you have your headlights on could you notice the rings when standing 10 feet in front of your xb????

the halos are extremely bright compared to mine! F*!

i want those!

sen-

those rings do look bright..... vrey nice i also want get one

http://i6.photobucket.com/albums/y247/swornthug/halo7.jpg
http://i6.photobucket.com/albums/y247/swornthug/halo6.jpg
http://i6.photobucket.com/albums/y247/swornthug/halo5.jpg


here are the pics with the head lights on. sorry i usedmy camer phone so i dont have good resolution.

its hard to see the halos on this camera phone, but in person you could notice halos.

ok just as i suspected ..... mine are the same way...

does anyone know if a HID bulb will fit?

as long as it is a 9006 for low neam and 9005 high beam

got news for you halos lovers,what happens when one halo is out on one headlight what do you do,i had those lights before they look nice but they don't light up the road like the stock, don't forget they might fog up too.............. :nails:

to fix up the fogging issue ..
just drill 3 lil holes on the bottom of the headlight...
it worked like a charm for me.... and we had rain in the past week..no fogging...

try this at your own discretion(sp?)
..it worked for me ....
results may vary

by the way i used the smallest drill bit

mine never foged up at all and yeah it rained last week...

..ordered me a few things from scionsport earlier this morning. order came to $368. Put alittle dent in my pocket.

Next month goodies, consist of either the JDM Foglights, or bBist CF Hood, :P Gotta have the xB looking somewhat decent before the July 31st bash.

to fix up the fogging issue ..
just drill 3 lil holes on the bottom of the headlight...
it worked like a charm for me.... and we had rain in the past week..no fogging...

try this at your own discretion(sp?)
..it worked for me ....
results may vary

This is not a smart thing to do. The reason why they fog is that they have holes allowing water/moisture to get into them. You must find all of the holes that were drilled for the LED wires and put some sealant over them. I did that before I installed them and they have never fogged up.

I wouldn't pay double or triple what you would pay on e-Bay, even if it is a reputable vendor (I've never ordered from scionsport, so I don't know their reputation). They all come from the same manufacturer (Helix) and they will all potentially have the same problems, no matter how much better it makes you feel to pay more for them. I paid about $115 shipped so even if they crap out on me, I won't feel that bad. They look great for now at least.

moved...

I just got those but my rings are not working because they are not connected to any power source.
to what should I connect them???
PLEASE I NEED SOME HELP :pray:

black wires get grounded...
the other wire goes to a power source...like the parking light circuit.

one of my halos are out...

IICONZ™ will have to check out the problem. hopefully change something =] Mr. Hitz did the install.

sen-

mine fog up and the lighting is poor,i think the stock headlight is the best light for the xb,it may not look aggressive as the halos but it does a better job when comes to lighting the road, don't plan to change mine....... :no:

THANKS dgHotLava ! !
But were is the parking light circuit??

THANKS dgHotLava ! !
But were is the parking light circuit??
on the amber bulb...

the plug for it has three wires.
the center one is a ground.
on one side is a trun signal...tap that for the three LED's (makes them a trun indicator too)
on the other side is the parking light. tap that one for the halo rings...

if you got it wrong just switch the two wires...

mine fog up and the lighting is poor,i think the stock headlight is the best light for the xb,it may not look aggressive as the halos but it does a better job when comes to lighting the road, don't plan to change mine....... :no:

TRY CHANGING THE BULBS... and the fogging issue .. there are ways it can be fixed.

okie for the wire problem.. you should pig two of the black wires to the third black wire. you're gonna have to strip someof the third wire in the middle then connect the pig tied wires to that, then wrap electrical tape around it. then hook that up to a ground. do the same for the power wires pig tie them, strip, and electrial tape it. then for the power wires you're gonna have to krimp them to the parking light wire, which is you signal light (amber). but you have to make sure you connect it to the parking light wire and not the turn signal wire. i'll look at mine and let you knw the color of the parking light wire.

soo I need to connect the yellow and black halo cables to one of the green cables of the amber light and the other yellow and black 3 circle cables to the other green cable of the light?

THANKS A LOT EVERYONE!!!!!!!
I GOT EM WORKING AND THEY LOOK INTENSE
i will post pics soon

no one answer my question.what happens when one halo is out how do you fix that problem i'm waiting....... :silly:

maybe it's me,but why should i have to drill holes or reseal a set of brand new head lights just so they would look cool on my car,as i say stock head lights would last you a lifetime,oh and another thing get ready to take the lights apart when the halo blow and by the way who in the hell sells halo bulbs just wondering....

its not even that hard to take apart the bumper to change the headlights. it only took me 15 mnutes to take apart my bumper and install my lights and put it back together. im pretty sure you can find the halo bulb on line somewhere. squarepants you seem really negative about these halo lights.

well all the problems i had with them i was hoping that someone had a solution that won't be a pain in the a**,don't think i need the headache just for good looks,i'll stick with my ugly stock light,the only headache i got is to change the bulbs......... :silly:

just for the record i went to a car show last week,there were 15 boxes only 3 had halos,i ask why you guys don't switch to halos they felt the same way i did,i know it's easy to install but you have to do it all again if you have problems with the light,and for goodness sake don't do like the other guy(not calling any names)who reseal them and later blew a halo and had to take the light apart change the halo and reseal it again....... :doh:

Those halos ARE really bright. They must have used some good leds in yours.

well all the problems i had with them i was hoping that someone had a solution that won't be a pain in the a**,don't think i need the headache just for good looks,i'll stick with my ugly stock light,the only headache i got is to change the bulbs......... :silly:I totally AGREE with you on this one..don't need the extra headache... :P

The same thing you would do if the stockers went out. Just go to the closest auto parts store or WallyWorld and get a new bulb.

Mine light up the highway just fine and the Hi-beams are GREAT!


got news for you halos lovers,what happens when one halo is out on one headlight what do you do,i had those lights before they look nice but they don't light up the road like the stock, don't forget they might fog up too.............. :nails:

i love these lights and would like to get me a set soon. if their is a fogging issue reseal them by the "oven method" ill have to ebay mine i guess. i dont wanna pay too much cuse ill be taking them apart to fix them anyway.

mine have a purple/bluish color..more like purple. i paid 130 shipped.. they work great and no fogging

These lights look good, but they SUCK! I had them on the car for 4 moths and the driver side one always fogged up. They are not made very well either, cheap materials. I want to get a hold of the manufacturer and try to get my money back. I paid $200 for nothin.

Well I just took them out and will put them for sale soon. If any one wants them, they are the black ones. I'm going back too stock, jsut cleared them and got a front face finisher from orataro.

whad did you claar? the stock ones or the halos? if you inspect them before you put them on you will do fine. i hate foggy lights. i dealt with Fords Warranty Dept. often on FACTORY headlamps.

whad did you claar? the stock ones or the halos? if you inspect them before you put them on you will do fine. i hate foggy lights. i dealt with Fords Warranty Dept. often on FACTORY headlamps.

I cleared the stock ones. I inspected the halos when I first got them, but couldn't tell they were gonna fog until I put them on. Oh well.

If any one wants them, they are the black ones. I'm going back too stock, jsut cleared them and got a front face finisher from orataro.

how much are you selling them for?

I just got those same ones in and i am looking for a link for a step by step install? can some one help?

Has anyone had a problem with the bumper not aligning right because the tab on the stock headlight is not on the projector headlight. The tab is on the bottom of the light and sits on the outside edge and the bumper has a small slot that this tab sits in and holds it in place. If you installed you might know what I'm talking about if not I might try to get a picture or two.

so if i want to change the halo i have to open up the head light assembly,do a search and fine who the hell sells these halo,install them and reseal the head lights,hm think i'll see who sells the halo first and what price they asking before i get em....... :nails:

Has anyone had a problem with the bumper not aligning right because the tab on the stock headlight is not on the projector headlight. The tab is on the bottom of the light and sits on the outside edge and the bumper has a small slot that this tab sits in and holds it in place. If you installed you might know what I'm talking about if not I might try to get a picture or two.

I had the halos installed, and yes the tabs on these are not made right. The bumper won't sit flush with the fender. So I had to cut the tabs shorter to fix this. These lights look good but they suck because you have to do extra work like cutting the tabs, fixing the blinker light socket hole, and probably have to open them up and reseal them better so they don't fog. If your going to buy them, buy them for no more than $100 or get them used.

is it me or is everyone havin problems wit these headlights? i mean i got mine in january and they fit fine no problem what so ever not even wit puttin my bumper back on everything fit nice it was clean..... no real fogging issue? maybe its WHO u bought them from i of course got mine off ebay for $324 an i liked the look an i get alot of eye catchin from them......now i see everyone else around town gettin them ive seen 4 xB's wit them now since i got mine but i can say i was the first to have them in H-TOWN and upgraded the bulbs to silverstars and they are hot!

i agree... mine are fogless and fit well ...
and after putting in the silverstars, they light up pretty good... maybe the ones they sell for $100 on ebay are made poorly ... or defective bunch and hence yje lower price...

i agree... mine are fogless and fit well ...
and after putting in the silverstars, they light up pretty good... maybe the ones they sell for $100 on ebay are made poorly ... or defective bunch and hence yje lower price... yeah i quickly noticed some where really CHEAP so maybe its the cheap ones that have been doin this? i know i spent over 3 bills on my set? how much did everyone spend on theres? and i bought mine from assembleweb off ebay wit no problem what so ever and fast delivery.

i agree... mine are fogless and fit well ...
and after putting in the silverstars, they light up pretty good... maybe the ones they sell for $100 on ebay are made poorly ... or defective bunch and hence yje lower price... yeah i quickly noticed some where really CHEAP so maybe its the cheap ones that have been doin this? i know i spent over 3 bills on my set? how much did everyone spend on theres? and i bought mine from assembleweb off ebay wit no problem what so ever and fast delivery.

I bought mine about 5 months ago and paid $250 for them from Assembleweb. They are all made by one manufacturer which I think is Helix, or Helix has them made for them oversees. This just shows that the product is very inconsistent. Lots of people have had fogging issues, some have hadthe halos fall off, other with fitment. This is why most people selling them, especially on ebay, are only giving a 7 day warranty because they know if they gave a standard 90 day or even a 30 day warranty, they would be gettin all kinds of returns. I'm glad you got some that have no issues, because yes, they do look good.

could be the cheapy ones that give problems like the fogging,the halo going out has nothing to do with cheap or expensive it's a light which means it will go out soooner or later,my thing is they should make these light simple to work with,if a halo goes out it's a pain in the a** to take the light apart just to change the halo,get ready to do it all again when it goes out later....

sexy!!

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=33710&item=7977041041&rd=1&ssPageName=WDVW

how are these?