Kaeon
05-29-2005, 11:19 PM
In this tutorial I will show you have to install the AEM Billet Oil Cap & Battery Tie Down.
Tools Need:
Socket Set
Allen Key Set
First and foremost I would disconnect the Battery's Negative Wire just to be safe.
http://www.scionlife.com/tech/images/aemcapandbat_tc/aem003.jpg
First unscrew the Oil Cap
http://www.scionlife.com/tech/images/aemcapandbat_tc/aem025.jpg
Screw on the AEM Billet Cap
http://www.scionlife.com/tech/images/aemcapandbat_tc/aem005.jpg
http://www.scionlife.com/tech/images/aemcapandbat_tc/aem007.jpg
Unscrew both bolts (One on each side) using your 10mm Socket
http://www.scionlife.com/tech/images/aemcapandbat_tc/aem022.jpg
Remove the Stock J-Hooks, Replace with AEM'S Black Hooks
http://www.scionlife.com/tech/images/aemcapandbat_tc/aem008.jpg
Unclip the battery ground wire from the OEM Bracket
http://www.scionlife.com/tech/images/aemcapandbat_tc/aem009.jpg
http://www.scionlife.com/tech/images/aemcapandbat_tc/aem%20016.jpg
http://www.scionlife.com/tech/images/aemcapandbat_tc/aem017.jpg
Install the provided negative battery cable bracket to the bottom of the AEM Battery Tie Down using the Screws they give you.(Screws are 3/32" Allen Key 19lbf-in)
http://www.scionlife.com/tech/images/aemcapandbat_tc/aem018.jpg
http://www.scionlife.com/tech/images/aemcapandbat_tc/aem019.jpg
http://www.scionlife.com/tech/images/aemcapandbat_tc/aem020.jpg
Install your new tie down using the OEM Bolts (10mm) tighten them untill the J-Hooks are flush with the bolts.
http://www.scionlife.com/tech/images/aemcapandbat_tc/aem021.jpg
Clip your ground wire into the bracket.
Sticker
AEM Sends you this sticker being you replaced the oil cap
http://www.scionlife.com/tech/images/aemcapandbat_tc/aem029.jpg
Remove the backing
http://www.scionlife.com/tech/images/aemcapandbat_tc/aem028.jpg
Stick it on and your done!
Final Finish
http://www.scionlife.com/tech/images/aemcapandbat_tc/aem023.jpg
http://www.scionlife.com/tech/images/aemcapandbat_tc/aem024.jpg
http://www.scionlife.com/tech/images/aemcapandbat_tc/aem025.jpg
http://www.scionlife.com/tech/images/aemcapandbat_tc/aem027.jpg
http://www.scionlife.com/tech/images/aemcapandbat_tc/aem030.jpg
Review:
The Billet Parts from AEM are good quality parts! Instructions are very informative and descriptive (Way better then there DC Header Install Ones) even for the simple Oil cap install. They send you AEM stickers with these parts. No these parts will not boost your hp or performance of your car, But it will provide you with a touch of *Bling*. It adds a nice pop to your dull boring engine bay! Great for that weekend show car!
Tools Need:
Socket Set
Allen Key Set
First and foremost I would disconnect the Battery's Negative Wire just to be safe.
http://www.scionlife.com/tech/images/aemcapandbat_tc/aem003.jpg
First unscrew the Oil Cap
http://www.scionlife.com/tech/images/aemcapandbat_tc/aem025.jpg
Screw on the AEM Billet Cap
http://www.scionlife.com/tech/images/aemcapandbat_tc/aem005.jpg
http://www.scionlife.com/tech/images/aemcapandbat_tc/aem007.jpg
Unscrew both bolts (One on each side) using your 10mm Socket
http://www.scionlife.com/tech/images/aemcapandbat_tc/aem022.jpg
Remove the Stock J-Hooks, Replace with AEM'S Black Hooks
http://www.scionlife.com/tech/images/aemcapandbat_tc/aem008.jpg
Unclip the battery ground wire from the OEM Bracket
http://www.scionlife.com/tech/images/aemcapandbat_tc/aem009.jpg
http://www.scionlife.com/tech/images/aemcapandbat_tc/aem%20016.jpg
http://www.scionlife.com/tech/images/aemcapandbat_tc/aem017.jpg
Install the provided negative battery cable bracket to the bottom of the AEM Battery Tie Down using the Screws they give you.(Screws are 3/32" Allen Key 19lbf-in)
http://www.scionlife.com/tech/images/aemcapandbat_tc/aem018.jpg
http://www.scionlife.com/tech/images/aemcapandbat_tc/aem019.jpg
http://www.scionlife.com/tech/images/aemcapandbat_tc/aem020.jpg
Install your new tie down using the OEM Bolts (10mm) tighten them untill the J-Hooks are flush with the bolts.
http://www.scionlife.com/tech/images/aemcapandbat_tc/aem021.jpg
Clip your ground wire into the bracket.
Sticker
AEM Sends you this sticker being you replaced the oil cap
http://www.scionlife.com/tech/images/aemcapandbat_tc/aem029.jpg
Remove the backing
http://www.scionlife.com/tech/images/aemcapandbat_tc/aem028.jpg
Stick it on and your done!
Final Finish
http://www.scionlife.com/tech/images/aemcapandbat_tc/aem023.jpg
http://www.scionlife.com/tech/images/aemcapandbat_tc/aem024.jpg
http://www.scionlife.com/tech/images/aemcapandbat_tc/aem025.jpg
http://www.scionlife.com/tech/images/aemcapandbat_tc/aem027.jpg
http://www.scionlife.com/tech/images/aemcapandbat_tc/aem030.jpg
Review:
The Billet Parts from AEM are good quality parts! Instructions are very informative and descriptive (Way better then there DC Header Install Ones) even for the simple Oil cap install. They send you AEM stickers with these parts. No these parts will not boost your hp or performance of your car, But it will provide you with a touch of *Bling*. It adds a nice pop to your dull boring engine bay! Great for that weekend show car!