I drove by ZPI today, it appears to be shoe polish in the window stating they have moved to somwhere on Fern Valley Road. This would be their third location in under a year. Just FYI for anyone looking for their money/parts.

Is this the address you went to?

Zero Point Industries
815 Ulrich Ave.
Louisville, KY 40219

That's close to Fern Valley, so I assume that's it. They were on Beulah Church Road, and a few months before that on Blankenbaker Access. I haven't seen their new location yet.

Yes, they told me they were moving because of some environmental regulations or something like that.

yeah, on the website it says they were moving again.

why cant they come here in LA or something >_<

Just FYI for anyone looking for their money/parts.
The negativity never stops does it? People are starting to get their kits and we still gotta hear how people are gonna get screwed. How come no one is bustin' ScionSpeed's chops?

Colin thanks for saving us from making this post. We are sure you only had the best of intentions!

Unfortunately, we did have to move from our new shop. The building was in some serious EPA violations and with an unwilling landlord to rectify these situations we had to count our losses and find a new location. We did not want to move and have been in negotiations for the past few weeks as some of our customers know. We where just unable to find a common ground that we could live with, that did not place us in a potential liability position.

We have published the move on the front page of our website; retained our phone number and placed a map to the new location on our site. Please, do not insinuate that the move is to avoid anyone if anything it is to provide us with a larger location to serve our customers better.

The move was done over the last week and with the help of some great customers who came and helped us move. With this help the transition went very smoothly and will not provide any type of delay on any orders or installs.

Colin thanks for saving us from making this post. We are sure you only had the best of intentions!

Unfortunately, we did have to move from our new shop. The building was in some serious EPA violations and with an unwilling landlord to rectify these situations we had to count our losses and find a new location. We did not want to move and have been in negotiations for the past few weeks as some of our customers know. We where just unable to find a common ground that we could live with, that did not place us in a potential liability position.

We have published the move on the front page of our website; retained our phone number and placed a map to the new location on our site. Please, do not insinuate that the move is to avoid anyone if anything it is to provide us with a larger location to serve our customers better.

The move was done over the last week and with the help of some great customers who came and helped us move. With this help the transition went very smoothly and will not provide any type of delay on any orders or installs.


You guys can move as many times as you see fit. I think you have enough credibility to do so. If it means better space for you to work on our cars, then so be it. Keep up the good work guys.

come to delaware, if not philly :P

move out to Florida! sunny weather, beaches, hot chick at the beaches spring and summer. come on guys you know u want to.

California has all of that except one thing that Florida doesn't.. Hurricanes.


Although we're also CARBified..


Edit: about two decades of life and NEVER have I been scared of a quake. I've felt two medium sized ones. Take it from me, ZPI, Cali Caliente is the place to be.

CARB and earthquakes.. how intriguing LOL

screw cali and florida, too many earthquakes and huricanes. move to NJ :lalala:

I have been to the new shop and it is great. It is so clean and big. You walk into the garage and all you can say is wow. ZPI has alot of big things happening for them, I am very excited to see what they will bring out next for our cars. Keep up the good work!

screw cali and florida, too many earthquakes and huricanes. move to NJ :lalala:

look we may have a lot of old people and rednecks driving trucks on our roads.. but FL doesn't have just 1 giant pothole of an interstate system. LOL


side note to the OT:
i think it's hilarious that ZPI is getting hated on without actually having screwed anyone. it's like people are just lining up for them to misspell something so they can just point and scream i told you so.

my company moved offices and i didn't call all 100+ customers of mine and explain to them that we moved and weren't trying to run away with their data. it's just a fact of business that doesn't have anything to do with customers' money or products.

Colin thanks for saving us from making this post. We are sure you only had the best of intentions!

Unfortunately, we did have to move from our new shop. The building was in some serious EPA violations and with an unwilling landlord to rectify these situations we had to count our losses and find a new location. We did not want to move and have been in negotiations for the past few weeks as some of our customers know. We where just unable to find a common ground that we could live with, that did not place us in a potential liability position.

We have published the move on the front page of our website; retained our phone number and placed a map to the new location on our site. Please, do not insinuate that the move is to avoid anyone if anything it is to provide us with a larger location to serve our customers better.

The move was done over the last week and with the help of some great customers who came and helped us move. With this help the transition went very smoothly and will not provide any type of delay on any orders or installs.


You guys can move as many times as you see fit. I think you have enough credibility to do so. If it means better space for you to work on our cars, then so be it. Keep up the good work guys.


do yah really think so...?

why else would he post it?

"credibility" apprently has different meanings to different people.. :doh:

screw cali and florida, too many earthquakes and huricanes. move to NJ :lalala:
Woo Hoo another person from NJ. And i thought i was alone!

Man here's my opinion. I live like a thousand miles away, but from what I've seen ZPI makes a great product at a great price. Yeah it's still having the final touches put on it, and yeah that's causing delays. Trust me, a month is nothing. TRD has delayed the super charger almost a year.

Do you people really think that their moving has something to do with them trying to sneak away.... why the hell would they still be on the boards?? They moved to a bigger, and likely better facility... which means they can be more organized, hire more people, and at the end of the day put out a better product faster.

If they keep doing good work, and keeping working well with the customers... then shut up and be glad you've got a company like them bustin' their butt to get things for the tC going.

My nickel-3.

-Tide

"credibility" apprently has different meanings to different people.. :doh:

yeah.. because there are soooo many people that got screwed by ZPI... like uhh.. nobody i've heard of

if you have a problem with ZPI, keep it out of the power forums and put it in the vendor reviews forum.. mmmkay?

"credibility" apprently has different meanings to different people.. :doh:

yeah.. because there are soooo many people that got screwed by ZPI... like uhh.. nobody i've heard of

if you have a problem with ZPI, keep it out of the power forums and put it in the vendor reviews forum.. mmmkay?

em... you're apparently not from KY nor have you heard of zpi previous to the scion store. but i'm not gonna bring this in here. bigger fish to fry.

regardless.. thats still NOTHING to do with the content of the power forum. agreed?

regardless.. thats still NOTHING to do with the content of the power forum. agreed?

agreed. this thread shouldn't be anywhere near this forum.
mods at work i see.

LOL... aint that the truth

ZPI's power hungry tC video
http://www.thescionstore.com/video/stage0dyno.WMV