painted valve cover
Thread Starter
Member
Scikotics
SL Member
Joined: Apr 2005
Posts: 98
painted valve cover
well i painted my valve cover yesterday. I went to the paint supply store and got everything i needed including a pint of Blue Onyx Pearl (toy. 8P
. I Cleaned the whole cover with PrepSol and let it it. I then sprayed it with Bulldog adhesive promoter and let that tack. Once the promoter was tacky, i sprayed the cover with the paint. I sprayed 6 coats of paint to make sure it was nice and even. Once that dried, i got a silver paint pen and painted the logo's on top. I still need to put a few coats of clear on top but here are some pics
. I Cleaned the whole cover with PrepSol and let it it. I then sprayed it with Bulldog adhesive promoter and let that tack. Once the promoter was tacky, i sprayed the cover with the paint. I sprayed 6 coats of paint to make sure it was nice and even. Once that dried, i got a silver paint pen and painted the logo's on top. I still need to put a few coats of clear on top but here are some pics
Thread Starter
Member
Scikotics
SL Member
Joined: Apr 2005
Posts: 98
mine looks a little dull and rough becouse it hasnt been cleared yet
here is the pic:
http://photobucket.com/albums/v665/j...t=100_0162.jpg
here is the pic:
http://photobucket.com/albums/v665/j...t=100_0162.jpg
Member
SL Member
Joined: Jun 2004
Posts: 65
From: Florence, KY
Originally Posted by jarrod
mine looks a little dull and rough becouse it hasnt been cleared yet
here is the pic:
http://photobucket.com/albums/v665/j...t=100_0162.jpg
here is the pic:
http://photobucket.com/albums/v665/j...t=100_0162.jpg
Thread
Thread Starter
Forum
Replies
Last Post
